PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Determination of PID Control Parameters of Plasmatron Plasma Reactor

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper presents determination of PID controller parameters for application of plasmatron powered plasma reactor designed and build in Industrial Research Institute for Automation and Measurements. Plasma reactor is the key element of the test setup, designed to research, processing and recovery of metals from waste of electric and electronic equipment, focusing on electronic printed circuit boards. Experiment was carried out with power of 36 kW. In experiment two temperatures were measured in two points of the reactor chamber, allowing verification of thermal response. Basing on identification of thermal parameters of the plasma reactor carried out in previous paper [7], the PID controller was chosen, as suitable to control second order inertia object. Parameters of used PID controlled were determined using MATLAB-Simulink toolbox. Calculated PID model was utilized for plasma reactor parameters control, allowing examination of energy saving by reducing of plasmatrons power, and stabilization of process parameters.
Rocznik
Strony
31--39
Opis fizyczny
Bibliogr. 7 poz., rys., tab.
Twórcy
  • Industrial Research Institute for Automation and Measurements
autor
  • Industrial Research Institute for Automation and Measurements
autor
  • Industrial Research Institute for Automation and Measurements
autor
  • Industrial Research Institute for Automation and Measurements
autor
  • Industrial Research Institute for Automation and Measurements
Bibliografia
  • 1. Huisman, J., 2007, 2008 Review of Directive 2002/96 on WEEE, Final Report, United Nations University.
  • 2. Cobbing, M., 2008,Toxic Tech: Not In Our Backyard, Greenpeace.org.
  • 3. Lee, J. Song, H. Yoo, J., 2007, Present status of the recycling of waste electrical and electronic equipment in Korea, Resources Conservation & Recycling No. 50, p. 380-397.
  • 4. Kang, H. Schoenung, J., 2005, Electronic waste recycling: A review of U.S. infrastructure and technology options, Resources Conservation & Recycling No. 45, p 368-400.
  • 5. Wawrzonek R., 2009, Praktyczne aspekty funkcjonowania systemu gospodarowania zużytym sprzętem elektrycznym i elektronicznym, Elektro Eco
  • 6. Environment Commission proposes revised laws on recycling and use of hazardous substances in electrical and electronic equipment, http://europa.eu/rapid/pressReleasesAction.do?reference=IP/08/1878&format=HTML&aged=1&language=EN&guiLanguage=en
  • 7. Szałatkiewicz J., Szewczyk R., 2012, Intelligent Utilization of Waste of Electrical and Electronic Equipment (Weee) with Robotized Tool, Journal of Automation, Mobile Robotics & Intelligent Systems Vol. 6, No 4
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-1b34eeab-a0a6-4b83-9d36-482d0d01b744
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.