Microfluidic design for continuous separation of blood particles and plasma using dielectrophoretic force principle

• Autorzy: Pakhira Writtick , Kumar Rajagopal , Panwala Fenil Chetankuma , Ibrahimi Khalid Mohd

Identyfikatory

DOI

10.24423/cames.653

• Języki publikacji: EN

Abstrakty

EN

Nowadays, various microfluidic platforms are developed with a focus on point-of-care diagnostics in the biomedical field. Segregation of blood cells and plasma remains an essential part of medical diagnosis in which isolation of platelets (PLTs), red blood cells (RBCs), and white blood cells (WBCs) is a requirement for analysis of diseases associated with thrombocytopenia, anemia, and leukopenia. However, a separated plasma contains proteins, nucleic acids, and viruses, for which a microfluidic device is introduced for continuous separation of PLTs, RBCs, and WBCs with a diameter range of 1.8–2 m, 5–6 m, and 9.4–14 m, respectively, and plasma using the negative dielectrophoresis (DEP) force principle. In this study, design of the device is explored utilizing COMSOL Multiphysics 5.4 tool. This design consists of triangular micro-tip electrodes at the top, which are effective in generating a nonuniform electrical field with a significantly small AC voltage. Furthermore, the blood cells are subjected to the negative DEP force resulting in deflection toward their respective outlets, due to which blood cell separation purity and efficiency from the sample, i.e., of PLTs, RBCs, and WBCs, improve and are obtained at a blood sample flow velocity of 700 m/s and buffer solution flow velocity of 1200 m/s with 12 Vpp electrode voltage, after experimenting and testing at multiple flow velocities. Additionally, a curved microchannel is introduced, producing better plasma flow velocity than a flat microchannel at the side outlets (top and bottom). The cell-free diluted plasma is collected at side outlets (top and bottom) with high purity and improved separation efficiency.

Słowa kluczowe

EN

blood cell separation; dielectrophoresis; microfluidic device; plasma separation

PL

separacja komórek krwi; dielektroforeza; urządzenie mikroprzepływowe; separacja plazmy

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Computer Assisted Methods in Engineering and Science
• Rocznik: 2023
• Tom: Vol. 30, no. 3
• Strony: 323--345
• Opis fizyczny: Bibliogr. 22 poz., rys., tab., wykr.

Twórcy

autor

Pakhira Writtick

• Department of Electronics and Instrumentation Engineering, National Institute of Technology, Nagaland, India

autor

Kumar Rajagopal

• Department of Electronics and Instrumentation Engineering, National Institute of Technology, Nagaland, India

autor

Panwala Fenil Chetankuma

• Department of Electronics and Instrumentation Engineering, Siddaganga Instituteof Technology, Tumakuru-572103, Karnataka, India

autor

Ibrahimi Khalid Mohd

• Department of Electronics and Instrumentation Engineering, National Institute of Technology, Nagaland, India

Bibliografia

• 1. Y.T. Yeh, M. Nisic, X. Yu, Y. Xia, S.Y. Zheng, Point-of-care microdevices for blood plasma analysis in viral infectious diseases, Annals of Biomedical Engineering , 42 (11): 2333–2343, 2014, doi: 10.1007/s10439-014-1044-2.
• 2. R. Harwood, Cell separation by gradient centrifugation, International Review of Cytology , 38 : 369–403, 1974, doi: 10.1016/S0074-7696(08)60930-4.
• 3. G.M. Whitesides, The origins and the future of microfluidics, Nature , 442 (7101): 368–373, 2006, doi: 10.1038/nature05058.
• 4. S.O. Catarino, R.O. Rodrigues, D. Pinho, J.M. Miranda, G. Minas, R. Lima, Blood cells separation and sorting techniques of passive microfluidic devices: From fabrication to applications, Micromachines , 10 (9): 593, 2019, doi: 10.3390/mi10090593.
• 5. E.L. Jackson, H. Lu, Advances in microfluidic cell separation and manipulation, Current Opinion in Chemical Engineering , 2 (4): 398–404, 2013, doi: 10.1016/j.coche.2013.10.001.
• 6. D.R. Gossett et al. , Label-free cell separation and sorting in microfluidic systems, Analytical and Bioanalytical Chemistry , 397 (8): 3249–3267, 2010, doi: 10.1007/s00216-010-3721-9.
• 7. S. Karthick, A.K. Sen, Improved understanding of acoustophoresis and development of an acoustofluidic device for blood plasma separation, Physical Review Applied , 10 (3): 034037, 2018, doi: 10.1103/PhysRevApplied.10.034037.
• 8. S. Yan, J. Zhang, G. Alici, H. Du, Y. Zhu, W. Li, Isolating plasma from blood using a dielectrophoresis-active hydrophoretic device, Lab on a Chip , 14 (16): 2993–3003, 2014, doi: 10.1039/C4LC00343H.
• 9. F. Yang et al. , Extraction of cell-free whole blood plasma using a dielectrophoresis-based microfluidic device, Biotechnology Journal , 14 (3): 1800181, 2019, doi: 10.1002/ biot.201800181.
• 10. M.G. Lee et al. , Inertial blood plasma separation in a contraction–expansion array microchannel, Applied Physics Letters , 98 (25): 253702, 2011, doi: 10.1063/1.3601745.
• 11. L. Spigarelli et al. , A passive two-way microfluidic device for low volume blood-plasma separation, Microelectronic Engineering , 209 : 28–34, 2019, doi: 10.1016/j.mee.2019.02.011.
• 12. Y. Zhang, X. Chen, Dielectrophoretic microfluidic device for separation of red blood cells and platelets: A model-based study, Journal of the Brazilian Society of Mechanical Sciences and Engineering , 42 (2): 89, 2020, doi: 10.1007/s40430-020-2169-x.
• 13. H. Shirinkami, G. Wang, J. Park, J. Ahn, Y. Choi, H. Chun, Red blood cell and white blood cell separation using a lateral-dimension scalable microchip based on hydraulic jump and sedimentation, Sensors and Actuators B: Chemical , 307 : 127412, 2020, doi: 10.1016/j.snb.2019.127412.
• 14. R.R. Pethig, Dielectrophoresis: Theory, Methodology and Biological Applications , John Wiley & Sons, 2017.
• 15. M. Mischel, F. Rougé, I. Lamprecht, C. Aubert, G. Prota, Dielectrophoresis of malignant human melanocytes, Archives of Dermatological Research , 275 (3): 141–143, 1983, doi: 10.1007/BF00510042.
• 16. I. Turcu, C.M. Lucaciu, Dielectrophoresis: a spherical shell model, Journal of Physics A: Mathematical and General , 22 (8): 985, 1989, doi: 10.1088/0305-4470/22/8/014.
• 17. Y. Kang, D. Li, S.A. Kalams, J.E. Eid, DC-Dielectrophoretic separation of biological cells by size, Biomedical Microdevices , 10 (2): 243–249, 2008, doi: 10.1007/s10544-007-9130-y.
• 18. M.Z.A. B.I., V. Tirth, C.M. Yousuff, N.K. Shukla, S. Islam, K. Irshad, K.O. Aarif, Simula- tion guided microfluidic design for multitarget separation using dielectrophoretic principle, BioChip Journal , 14 (4): 390–404, 2020, doi: 10.1007/s13206-020-4406-x.
• 19. Y. Zhang, X. Chen, Blood cells separation microfluidic chip based on dielectrophoretic force, Journal of the Brazilian Society of Mechanical Sciences and Engineering , 42 (4): 206, 2020, doi: 10.1007/s40430-020-02284-8.
• 20. M.S. Maria, T.S. Chandra, A.K. Sen, Capillary flow-driven blood plasma separation and on-chip analyte detection in microfluidic devices, Microfluidics and Nanofluidics , 21 (4): 72, 2017, doi: 10.1007/s10404-017-1907-6.
• 21. H. Ali, C.W. Park, Numerical study on the complete blood cell sorting using particle tracing and dielectrophoresis in a microfluidic device, Korea-Australia Rheology Journal , 28 (4): 327–339, 2016, doi: 10.1007/s13367-016-0033-4.
• 22. N.V. Nguyen, T. Le Manh, T.S. Nguyen, V.T. Le, N. Van Hieu, Applied electric field analysis and numerical investigations of the continuous cell separation in a dielectrophoresis-based microfluidic channel, Journal of Science: Advanced Materials and Devices , 6 (1): 11–18, 2021, doi: 10.1016/j.jsamd.2020.11.002.