Metodyka oceny uszkodzenia elementów konstrukcyjnych na przykładzie belki izotropowej jednostronnie utwierdzonej

• Autorzy: Samborski S. , Wieczorkiewicz J. , Rusinek R. , Dziedzic J.

Warianty tytułu

EN

Methodology of structures damage estimation in case of cantilever isotropic beam

• Języki publikacji: PL

Abstrakty

PL

W pracy zbudowano model numeryczny belki wspornikowej z uszkodzeniem i bez uszkodzenia oraz wyznaczono ichczęstości własne dla zadanych charakterystyk mate-riałowych. Następnie przeprowadzono badania na fizycznym obiekcie przy użyciu wibrometru laserowego PSV-500 firmy Polytec. Otrzymane rezultaty doświadczalne porównano z wynikami obliczeń nume-rycznych stosując metody analizy sygnału oparte na wykresach płaszczyzny fazowej.

EN

This paper focuses on analysis of damage detection cantilever beam. Finite Element Method was used to simulate vibrations of the intact and the damaged beams. Analysis of natural frequencies of both the intact and the damaged beams was performed in order to observe the effect of damage on the beams dynamics. Next, the phase diagrams technique was applied andfinally, experimental verification was performed to check the numerical results.

Słowa kluczowe

PL

detekcja uszkodzeń; belka wspornikowa; płaszczyzna fazowa

EN

damage detection; cantilever beam; phase space diagram

• Wydawca: Polskie Towarzystwo Promocji Wiedzy ; Wydawnictwo Politechniki Lubelskiej
• Czasopismo: Journal of Technology and Exploitation in Mechanical Engineering
• Rocznik: 2015
• Tom: Vol. 1, nr 1-2
• Strony: 5--16
• Opis fizyczny: Bibliogr. 41 poz., rys., tab.

Twórcy

autor

Samborski S.

• Katedra Mechaniki Stosowanej, Wydział Mechaniczny, Politechnika Lubelska

autor

Wieczorkiewicz J.

• Katedra Mechaniki Stosowanej, Wydział Mechaniczny, Politechnika Lubelska

autor

Rusinek R.

• [e-mail]

autor

Dziedzic J.

• Studenckie Koło Naukowe przy Katedrze i Zakładzie Ortopedii Szczękowej, Uniwersytet Medyczny w Lublinie, Politechnika Lubelska

Bibliografia

• 1. Cichon P., Stosiak M. Zastosowanie wibrometru laserowego do pomiaru drgań stołu symulatora liniowego napędu hydrostatycznego, Napedy i Sterowanie, 5 (2012),s. 66-72
• 2. Bathe K. J. Computational fluid and solid mechanics 2003: Proceedings, Second MIT Conference on Computational Fluid and Solid Mechanics, June 17-20, 2003. On the different behaviour of porous ceramic polycrystalline materials under tension and compression stress state, 1st ed., Elsevier, Amsterdam, Boston, 2003
• 3. Sirivedin S., Fenner D. N., Nath R. B., Galiotis C. Effects of inter-fibre spacing and matrix cracks on stress amplification factors in carbon-fibre/epoxy matrix composites. Part I: planar array of fibres, Composites Part A: Applied Science and Manufacturing, 34 (2003), s. 1227-1234
• 4. Sirivedin S., Fenner D. N., Nath R. B., Galiotis C. Effects of inter-fibre spacing and matrix cracks on stress amplification factors in carbon-fibre/epoxy matrix composites, Part II: Hexagonal array of fibres, Composites Part A: Applied Science and Manufacturing, 37 (2006), s. 1936-1943
• 5. Yu A., Gupta V. Measurement of in situ fiber/matrix interface strength in graphite/epoxy composites, Composites Science and Technology, 58 (1998), s. 1827-1837
• 6. Muc A., Stawiarski A. Identification of damages in composite multilayered cylindrical panels with delaminations, Composite Structures, 94 (2012), s.1871-1879
• 7. Zahran O., Kasban H., El-Kordy M., El-Samie F. A. Automatic weld defect identification from radiographic images, NDT & E International, 57 (2013), s. 26-35
• 8. Zou Y., Du D., Chang B., Ji L., Pan J.Automatic weld defect detection method based on Kalman filtering for real-time radiographic inspection of spiral pipe, NDT & E International, 72 (2015), s. 1-9
• 9. Manoach E., Samborski S., Mitura A., Warminski J. Vibration based damage detection in composite beams under temperature variations using Poincaré maps, International Journal of Mechanical Sciences, 62 (2012), s. 120-132
• 10. Manoach E., Trendafilova I. Large amplitude vibrations and damage detection of rectangular plates, Journal of Sound and Vibration, 315 (2008), s. 591-606
• 11. Manoach E., Warminski J., Mitura A., Samborski S.Dynamics of a composite Timoshenko beam with delamination, Mechanics Research Communications, 46 (2012), s. 47-53
• 12. Manoach E., Warminski J., Mitura A., Samborski S.Dynamics of a laminated composite beam with delamination and inclusions, European Physical Journal Special Topics, 222 (2013), s. 1649-1664
• 13. Trendafilova I., Manoach E.Vibration-based damage detection in plates by using time series analysis, Mechanical Systems and Signal Processing, 22 (2008), s. 1092-1106
• 14. Krawczuk M., Żak A., Ostachowicz W. Elastic beam finite element with a transverse elasto-plastic crack, Finite Elements in Analysis and Design, 34 (2000), s. 61-73
• 15. Abarbanel H. D. I. Analysis of Observed Chaotic Data, Springer-Verlag, New York, 1996
• 16. Eckmann J. P.,. Kamphorst S. O, Ruelle D. Recurrence Plots of Dynamical Systems, Europhysics Letters, 4 (1987), s. 973-977
• 17. Elwakil A. S., Soliman A. M. Mathematical Models of the Twin-T, Wien-bridgeand Family of Minimum Component Electronic ChaosGenerators with Demonstrative Recurrence Plots, Chaos, Solitons & Fractals, 10 (1999), s. 1399-1412
• 18. Giuliani A., Manetti C. Hidden peculiarities in the potential energy time series of a tripeptide highlighted by a recurrence plot analysis: A molecular dynamics simulation, Physical Review E, 53 (1996), s. 6336–6340.
• 19. Gradisek J., Grabec I., Siegert S., Friedrich R. Stochastic Dynamics of Metal Cutting: Bifurcation Phenomena in Turning, Mechanical Systems and Signal Processing, 16 (2002), s. 831-840
• 20. Johnson M. A., Moon F. C. Nonlinear Techniques to Characterize Prechatter and Chatter Vibrations in the Machining of Metals, InternationalJournal ofBifurcation and Chaos, 2 (2001), s. 449-467
• 21. Kecik K., Rusinek R., Warminski J. Stability Lobes Analysis of Nickel Super-alloys Milling, International Journal of Bifurcation and Chaos, 21 (2011), s. 1-12
• 22. Litak G., Kaminski T., Rusinek R., Czarnigowski J., Wendeker M. Patterns in the combustion process in a spark ignition engine, Chaos Solitons and Fractals, 35 (2008), s. 578-585
• 23. Litak G., Rusinek R. Dynamics of a stainless steel turning process by statisti-cal and recurrence analyses, Meccanica 47 (2012), s. 1517-1526
• 24. Litak G., Syta A., Rusinek R. Dynamical changes during composite milling: recurrence and multiscale entropy analysis, International Journal of Advanced Manufacturing Technology, 56 (2011), s. 445-453
• 25. Manetti C., Giuliani A., Ceruso M. A., Webber C. L., Zbilut J. P. Recurrence analysis of hydration effects on nonlinear protein dynamics: multiplicative scaling and additive processes, Physics Letters A, 281 (2001), s. 317-323
• 26. Marwan N., Romano M.C., Thiel M., Kurths J. Recurrence plots for the analy-sis of complex systems, Physics Reports, 438 (2007), s. 237-329
• 27. Marwan N., Thiel M., Nowaczyk N. R. Cross recurrence plot based synchro-nization of time series, Nonlinear Processes Geophysics, 9 (2002), s. 325-331
• 28. Marwan N., Wessel N., Meyerfeldt U., Schirdewan A., Kurths J. Recurrence-plot-based measures of complexity and their application to heart-rate-variability data, Physical Review E, 66 (2002), s. 26702
• 29. Nayfeh A. H., Balachandran B. Applied Nonlinear Dynamics - Analytical, Computational and Experimental Methods, John Wiley & Sons, Inc, 1995
• 30. Nichols J.M., Trickey S.T., Seaver M. Damage detection using multivariate recurrence quantification analysis, Mechanical Systems and Signal Pro-cessing, 20 (2006), s. 421-437
• 31. Nichols J.M., Trickey S.T., Seaver M., Moniz L. Use of Fiber-optic Strain Sensors and Holder Exponents for Detecting and Localizing Damage in an Experimental Plate Structure, Journal of Intelligent Material Systems and Structures, 18 (2006), s. 51-67
• 32. Nomura Y., Morimoto D., Kusaka T., Furuta H. Structural Damage Localiza-tion Based on Recurrence Plots of Chaotic Response Attractor, Transactions of the Japan Society of Mechanical Engeneers,Series C, 79 (2013), s. 4210-4222
• 33. Poincaré H. Introduction, Acta Mathematica, 13 (1890) 5-7
• 34. Rusinek R. Cutting process of composite materials: An experimental study, International Journal of Non-Linear Mechanics, 45 (2010), s. 458-462
• 35. Rusinek R. Vibrations In Cutting Process Of Titanium Alloy, Eksploatacja i Niezawodnosc - Maintenance and Reliability, 3 (2010), s. 48-55
• 36. Rusinek R., Szymanski M., Warminski J., Zadrozniak M., Morshed K. Vibra-tions in the Human Middle Ear, Medical Science Monitor, 17 (2011), s. 372-376
• 37. Rusinek R., Warminski J. Attractor reconstruction of self-excited mechanical systems, Chaos Solitons and Fractals, 40 (2009), s. 172-182
• 38. Sato T., Tanaka Y. Minor Damage Detection Using Chaotic Excitation and Recurrence Analysis, Journal of Earthquake and Tsunami, 05 (2011), s. 259-270
• 39. Thomasson N., Hoeppner T.J., Webber C.L., Zbilut J.P. Recurrence quantifi-cation in epileptic EEGs, Physics Letters A, 279 (2001), s. 94-101
• 40. Zbilut J. P., Koebbe M., Loeb H., Mayer-Kress G. Use of recurrence plots in the analysis of heart beat intervals, in: [1990] Computers in Cardiology, Chicago, IL, USA, 23-26 Sept. 1990, s. 263-266
• 41. Zolotova N. V., Ponyavin D. I. Phase asynchrony of the north-south sunspot activity, Astronomy &Astrophysics, 449 (2006), s. L1-L4 Abaqus 6.13: analysis user's manual, DassaultSystemes, 2013