Rotary - percussion drilling method - historical review and current possibilities of application

• Autorzy: Sapińska-Śliwa A. , Wiśniowski R. , Korzec M. , Gajdosz A. , Śliwa T.

Identyfikatory

DOI

10.7494/drill.2015.32.2.313

• Języki publikacji: EN

Abstrakty

EN

'Faster, deeper, cheaper' -it is not just a slogan, it is a motto of every oil company. The first application of rotary--percussion drilling method in drilling oil wells took place in early 60's of the XX century in the United States. Unfortunately, in Poland did not apply. First of all, the main advantage is the inereased rate of penetration, in comparison with standard rotary drilling, and consequently - lower wellbore costs. The purpose of present paper is to discuss the historical background of application of rotary-percussion drilling method, technological changes that have oceurred over the years, and to show the potential of this drilling method, using modern technology, in comparison with standard rotary method.

Słowa kluczowe

EN

rotary-percussion drilling method; drilling mud

• Wydawca: AGH University of Science and Technology Press
• Czasopismo: AGH Drilling, Oil, Gas
• Rocznik: 2015
• Tom: Vol. 32, no. 2
• Strony: 313--323
• Opis fizyczny: Bibliogr. 12 poz., rys., tab., wykr.

Twórcy

autor

Sapińska-Śliwa A.

• AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Kraków, Poland

autor

Wiśniowski R.

• AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Kraków, Poland

autor

Korzec M.

• AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Kraków, Poland, Student Scientific Association "GEOWIERT"

autor

Gajdosz A.

• AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Kraków, Poland

autor

Śliwa T.

• AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Kraków, Poland

Bibliografia

• [1] Ford R., Stone A., Spedale A., Slaughter R., Swadi S., Dewey C: Efficiently Developing Fayetteville Shale Gas Reserves: Percussion Drilling Sohes Application Challenges/Reduces Drilling Costs. SPE, 2011.
• [2] Finger J.T.: Investigation of Percussion Drills for Geothermal Application. JPT, 21, Dec. 1984, 28-36.
• [3] Gerlero M., Soroldoni T., Barreto D.: Sao Francisco Basin Tight Reservoir Play: Defining Benefits of Hammer. Bit/P ercussion Drilling, Onshore Brazil. SPE, 2014.
• [4] Herrington D., Barton S., Cote B., Gaines M., Morrison R.: Hammer Motor Breaks New Ground in China. SPE, 2012.
• [5] Kang S., Gao C: Shale Gas Boom in the USA Inspires Chinese Operators. SPE, 2014.
• [6] Nas S., Gala D., Cox P: Deep Air Drilling Application to Enhance Ratę of Penetration in Extremely Hard, Abrasive and High Temperature Environment. SPE, 2010.
• [7] Pletcher J., Scarr A., Smith J., Swadi S., Rogers C: Application of Air Percussion Drilling Improves Drilling Efficiency in Horizontal Sandstone Wells. SPE, 2010.
• [8] http://www.wassara.com/en/Technology/.
• [9] http://www.drillcotools.com/ing/martillocaracteristicas.asp.
• [10] Sokołowski S., Baraniecka M.D.: Stratygrafia. Cz. 3b. Kenozoik, czwartorzęd. Wydawnictwo Geologiczne, Warszawa 1984.
• [11] Wiśniowski R., Stryczek S.: Stan aktualny i rozwój technologii i technik wiertniczych. Wiertnictwo Nafta Gaz, t. 23/2, 2006, 733-752.
• [12] Wiśniowski R., Wójcik M., Toczek M.: Nowe technologie wiertnicze stosowane w wierceniach inżynieryjnych. Wiertnictwo Nafta Gaz, t. 23/1, 2006, 543-556.