The Application of Friction Stir Processing to the Fabrication of Magnesium-Based Foams

• Autorzy: Azizieh M. , Pourmansouri R. , Balak Z. , Kafashan H. , Mazaheri M. , Kim H. S.

Identyfikatory

DOI

10.1515/amm-2017-0293

• Języki publikacji: EN

Abstrakty

EN

In the present paper, friction stir processing (FSP) is used to fabricate magnesium-based nanocomposite foams. The effects of the number of FSP passes, TiH₂ to Al₂O₃ weight ratio, and foaming temperature; on the pore distribution and porosity are described. The results indicate that a minimum TiH₂ to Al₂O₃ weight ratio is necessary to provide the best pore distribution and porosity. Closed-cell porous magnesium with a porosity of about 17.5% was successfully fabricated using 4-pass FSP at 800 rpm, by adding 5 mass% TiH₂ and 3.5 mass% Al₂O₃; at a holding temperature of 858 K, and a holding time of 45 min.

Słowa kluczowe

EN

metal foam; friction stir processing; porosity; magnesium

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 4
• Strony: 1957--1962
• Opis fizyczny: Bibliogr. 27 poz., rys., tab., wykr.

Twórcy

autor

Azizieh M.

• Department of Materials Science and Engineering, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran

autor

Pourmansouri R.

• Department of Materials Science and Engineering, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran

autor

Balak Z.

• Department of Materials Science and Engineering, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran

autor

Kafashan H.

• Department of Materials Science and Engineering, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran

autor

Mazaheri M.

• Department of BASIC Sciences, Hamedan University of Technology, Hamedan 65155, Iran

autor

Kim H. S.

• Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang 790-784, South Korea

Bibliografia

• [1] M. F. Ashby, A. G. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson, H. N. G. Wadley; ‘Metal foams: a design guide’, 2000, Butterworth-Heinemann, p. 1-23.
• [2] C. E. Wen, Y. Yamada, K. Shimojima, Y. Chino, H. Hosokawa, M. Mabuchi, Mater. Lett. 58, 357-360 (2004).
• [3] C. E. Wen, M. Mabuchi, Y. Yamada, K. Shimojima, Y. Chino, T. Asahina, Scripta Mater. 45, 1147-1153 (2001).
• [4] G. L. Hao, F. S. Han, W .D. Li, J. Porous Mater. 16, 251-256 (2009).
• [5] G. L. Hao, F. S. Han, J. Wu, X. F. Wang, Powder Metall. 50, 127-131 (2007).
• [6] H. Y. Zhuang, Y. Han, A. L. Feng, Mater. Sci. Eng. C 28, 1462-1466 (2008).
• [7] J. Capek, D. Vojtech, Mater. Sci. Eng. C Mater. Biol. Appl. 33, 564-569 (2013).
• [8] Y. Yamada, K. Shimojima, Y. Sakaguchi, M. Mabuchi, M. Nakamura, T. Asahina, J. Mater. Sci. Lett. 18, 1477-1480 (1999).
• [9] S. Ho, C. Ravindran, G. D. Hibbard, Scripta Mater. 62, 21-24 (2010).
• [10] J. H. Xu, G. B. Mao, L. P. Cheng, Z. Q. Hu, 23, 84-87 (2003).
• [11] N. T. Kirkland, I. Kolbeinsson, T. Woodfield, G. J. Dias, M. P. Staiger, Mater. Sci. Eng. B Adv. Funct. Solid-State Mater. 176, 1666-1672 (2011).
• [12] M.P. Staiger, I. Kolbeinsson, N. T. Kirkland, T. Nguyen, G. Dias, T. B. F. Woodfield, Mater. Lett. 64, 2572-2574 (2010).
• [13] X. C. Xia, W. M. Zhao, X. Z. Feng, H. Feng, X. Zhang, Mater. Des. 49, 19-24 (2013).
• [14] Z. G. Xu, J. W. Fu, T. J. Luo, Y. S. Yang, Mater. Des. 34, 40-44 (2012).
• [15] X. N. Gu, W. R. Zhou, Y. F. Zheng, Y. Liu, Y. X. Li, Mater. Lett. 64, 1871-1874 (2010).
• [16] Y. Hangai, T. Utsunomiya, Metall. Mater. Trans. A 40, 275-277 (2009).
• [17] Y. Hangai, T. Utsunomiya, Metall. Mater. Trans. A 40, 1284-1287 (2009).
• [18] Y. Hangai, K. Saito, T. Utsunomiya, S. Kitahara, O. Kuwazuru, N. Yoshikawa, Mater. T. JIM 54, 405-408 (2013).
• [19] Y. Hangai, T. Utsunomiya, M. Hasegawa, J. Mater. Proc. Tech. 210, 288-292 (2010).
• [20] A. F. Hasan, C. J. Bennett, P. H. Shipway, Mater. Des. 87, 1037-1046 (2015).
• [21] Y. Hangai, Y. Ozeki, T. Utsunomiya, Mater. T. JIM 50, 2154-2159 (2009).
• [22] H. Liu, P. He, J. C. Feng, J. Cao, Int. J. Hydrogen Energ. 34, 3018-3025 (2009).
• [23] K. Kitazono, S. Nishizawa, E. Sato, T. Motegi, Mater. T. JIM, 45, 2389-2394 (2004).
• [24] F. Baumgartner, I. Duarte, J. Banhart, Adv. Eng. Mater. 2, 168-174 (2000).
• [25] I. Duarte, J. Banhart, Acta Mater. 48, 2349-2362 (2000).
• [26] K. Kitazono, E. Sato, K. Kuribayashi, Scripta Mater. 50, 495-498 (2004).
• [27] D. Yang, J. Chen, H. Wang, J. Jiang, A. Ma, Z. P. Lu, J. Mater. Sci. Tech. 31, 361-336 (2015).

Uwagi

EN

M. Azizieh, R. Pourmansouri, H. Kafashan and Z. Balak atefully acknowledge Islamic Azad University, the Ahwaz Branches for financial support towards this research work. In addition, H. S. Kim acknowledges a grant obtained from the National Research Foundation of Korea (NRF) funded by the Korea government (MSIP) (No. 20l4R1A2AlA10051322).

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).