PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Deposition effect of carbon deposits on charge flow in EGR valve equipped CI engine

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The exhaust gas recirculation (EGR) valve regulates the exhaust gas flow between the engine exhaust manifold and the inlet one. This allows the inlet air to warm up, improving fuel evaporation and reducing the combustion temperature of the charge. Such a valve reduces the number of harmful substances in the exhaust gases. The valve tends to stick when too much sediment builds on the walls of the exhaust system, especially during driving in urban conditions or when leaks in the vacuum or exhaust pipes occur. A faulty valve causes the engine to run unevenly at idle speed and under light loads. The defective EGR valve weakens the inlet manifold capacity, increases combustion, causes clogging of the particulate filter and damage to the lambda probe. Blocked EGR valve may lead to engine immobilization as a result of its computerized control system operations. A model of an EGR valve for a selected diesel engine was developed to determine velocity distribution of the load flowing in it for different values of the degree of valve opening and the volume of deposits on the valve walls. The volume of accumulated carbon deposits on the walls of the EGR valve was measured using a real engine. Based on the recorded mileage of the vehicle, the assumed average speed of the car and the driving style of the driver and the intensity of deposition of carbon particles on the walls was estimated.
Czasopismo
Rocznik
Strony
26--35
Opis fizyczny
Bibliogr. 68 poz., il. kolor., rys., wykr.
Twórcy
  • Department of Vehicles and Fundamentals of Machine Design, Lodz University of Technology, Poland
  • Department of Vehicles and Fundamentals of Machine Design, Lodz University of Technology, Poland
  • Department of Vehicles and Fundamentals of Machine Design, Lodz University of Technology, Poland
autor
  • Department of Materials Engineering and Production Systems, Lodz University of Technology, Poland
  • Department of Industrial Engineering and Systems, University of Sonora, Mexico
  • Maintenance Department, University of Pitesti, Romania
Bibliografia
  • [1] Williams R, Cook S, Woodall K, Clayton, C, Gee M, Mulquen S et al. Development of an engine test to rate the EGR deposit formation propensity of fuels in light-duty diesel engines. SAE Int J Adv & Curr Prac in Mobility. 2021;3(1): 337-348. https://doi.org/10.4271/2020-01-2096
  • [2] Kikichi G, Miyagawa M, Yamamoto Y, Inayoshi N. Accumulation mechanism of gasoline EGR deposit. SAE Technical Paper 2017-01-0806. 2017. https://doi.org/10.4271/2017-01-0806
  • [3] Manni M, Florio S, Gommellini C. Impact of fuel and oil quality on deposits, wear and emissions from a light duty diesel engine with high EGR. SAE Transactions. 2000; (109):1534-1547. http://www.jstor.org/stable/44745955.
  • [4] Hasannuddin AK, Yahya WJ, Sarah S, Ithin AM, Syahrullail S, Sugeng DA et al. Performance, emissions and carbon deposit characteristics of diesel engine operating on emulsion fuel. Energy. 2018;(142):496-506. https://doi.org/10.1016/j.energy.2017.10.044
  • [5] De Serio D, Oliveira A, Sodre JR. Effects of EGR rate on performance and emissions of a diesel power generator fueled by B7. J Braz Soc Mech Sci. 2017;(39):1919-1927. https://doi.org/10.1007/s40430-017-0777-x
  • [6] Jaaskelainen H, Khair MK. Exhaust Gas Recirculation. https://dieselnet.com/tech/engine_egr.php, 2021
  • [7] Zha Y, Cunningham M, Heichelbech J, Lakkireddy V, Kumar A, Srinivasan A et al. Cummins sustained low temperature NOx reduction (SLTNR). 2016 Annual Merit Review. Washington 9.06.2016. https://energy.gov/sites/prod/files/2016/06/f33/pm068_zha_2016_o_web.pdf
  • [8] Hassan AO, Abu-Jrai A, Al-Muhatseb AH, Jamil F. Impact of EGR and engine speed on HCCI engine performance and tailpipe emissions. Energy Proced. 2017;(136):208-212. https://doi.org/10.1016/j.egypro.2017.10.321
  • [9] Parks JE, Prikhodko V, Storey JME, Barone TL, Lewis S.A., Kass MD et al. Emissions from premixed charge compression ignition (PCCI) combustion and effect on emission control devices. Catal Today. 2010;151(3-4):278-284. https://doi.org/10.1016/j.cattod.2010.02.053
  • [10] Jonasson K. Control of hybrid electric vehicles with diesel engines. Doctoral Dissertation. Lund Institute of Technology, Sweden 2005. https://www.iea.lth.se/publications/Theses/LTH-IEA-1046.pdf
  • [11] Yamada T, Haga H, Matsumoto I, Tomoda T. Study of diesel engine system for hybrid vehicles. SAE Int J Alt Power. 2012;1(2):560-565. https://doi.org/10.4271/2011-01-2021.
  • [12] Lee J, Moon JI, Yeon-Hee K. A study on heat exchange efficiency of EGR cooler for diesel hybrid. Transactions of the Korean Society of Automotive Engineers. 2009;17(2): 159-164. https://www.koreascience.or.kr/article/JAKO2009-09651054565.pdf
  • [13] Song RC. A study on engine performance of EGR valve problem in hybrid vehicles. J Energ Eng. 2015;(24):34-39, https://doi.org/10.5855/ENERGY.2015.24.3.034.
  • [14] Jeong BG, Won JH, Oh KC, Heo HS, Bae S, Seo HJ et al. Characteristics of integrated air control and low-pressure exhaust gas recirculation valve for diesel engines. Int J Automot Techn. 2020;21(1):239-247. https://doi.org/10.1007/s12239-020-0023-x
  • [15] Zheng M, Reader GT, Hawley JG. Diesel engine exhaust gas recirculation - a review on advanced and novel concepts. Energ Convers Manage. 2004;(45):883-900. https://doi.org/10.1016/S0196-8904(03)00194-8
  • [16] Reinfarth S. EGR-systems for diesel engines. Licentiate thesis. Kungliga Tekniska Högskolan (KTH), Stockholm 2010. http://kth.diva-portal.org/smash/get/diva2:305816/-FULLTEXT01
  • [17] Teng H, Regner G. Characteristics of soot deposits in EGR coolers. SAE Technical Paper 2009-01-2671. 2009. https://doi.org/10.4271/2009-01-2671
  • [18] Teodorescu CS, Olaru S. Issues in modeling and control of electro-pneumatic EGR valve actuator for automotive engineering. 15th International Conference on System Theory, Control and Computing (ICSTCC), Sinaia 2011:1-8. https://ieeexplore.ieee.org/document/6085657
  • [19] Krakowian K, Kazmierczak A, Gorniak A, Wróbel R. Influence of the single EGR valve usability on development of the charge directed to individual cylinders of an internal combustion engine. International Conference on Advances in Energy Systems and Environmental Engineering (ASEE17). E3S Web Conf. 2017;22. https://doi.org/10.1051/e3sconf/20172200088
  • [20] Mulenga MC, Chang DK, Tjong JS, Styles D. Diesel EGR cooler fouling at freeway cruise. SAE Technical Paper 2009-01-1840. 2009. https://doi.org/10.4271/2009-01-1840
  • [21] Abarham M, Hoard J, Assanis D, Styles D, Cutris EW, Ramesh N. Review of soot deposition and removal mechanisms in EGR coolers. SAE Int J Fuels Lubr. 2010;3(1): 690-704. https://doi.org/10.4271/2010-01-1211
  • [22] Agarwal D, Singh SK, Agarwal AK. Effect of exhaust gas recirculation (EGR) on performance, emissions, deposits and durability of a constant speed compression ignition engine. Appl Energy. 2011;88(8):2900-2907. https://doi.org/10.1016/j.apenergy.2011.01.066
  • [23] Pulkrabek WW. Engineering Fundamentals of the Internal Combustion Engine. Prentice Hall, New Jersey 2004.
  • [24] Okubo M, Kuwahara T. Principle and design of emission control systems. Chapter 3. New Technologies for Emission Control in Marine Diesel Engines. Elsevier 2019. https://doi.org/10.1016/B978-0-12-812307-2.00003-1
  • [25] Hussain J, Palaniradja K, Alagumurthi N, Manimaran R. Effect of exhaust gas recirculation (EGR) on performance and emission of a compression ignition engine with staged combustion (insertion of unburned hydrocarbon). Int J Energ Eng. 2012:2(6):285-292. https://doi.org/10.5923/j.ijee.20120206.03
  • [26] Shi Y, Reitz RD. Multi-dimensional modelling of diesel combustion: Review. In: Modelling Diesel Combustion. Mechanical Engineering Series. Springer. Dordrecht 2010. https://doi.org/10.1007/978-90-481-3885-2_15
  • [27] Abay K, Colak U, Yuksek L. Computational fluid dynamics analysis of flow and combustion of a diesel engine. J Therm Eng.2018;4(2):1878-1895. https://doi.org/10.18186/journal-of-thermal-engineering.388333
  • [28] Millo F, Pautasso E, Pasero P, Barbero S, Vennettilli N. An experimental and numerical study of an advanced EGR control system for automotive diesel engine. SAE Int J Engines. 2009;1(1):188-197. https://doi.org/10.4271/2008-01-0208
  • [29] Abd-Elhady MS, Malayeri MR, Muller-Steinhagen H. Fouling problems in exhaust gas recirculation coolers in the automotive industry. Proc Int Conf Heat Exchanger Fouling Clean VIII, Schladming. 2009:125-133. https://heatexchanger-fouling.com/wp-content/uploads/2021/09/17_Malayer_EGR_F.pdf
  • [30] McKinley TL. Modeling sulfuric acid condensation in diesel engine EGR coolers. SAE Technical Paper 970636. 1997. https://doi.org/10.4271/970636
  • [31] Lim J, Kang B, Park J et al. A study on the effects of EGR temperature on emission characteristics in a HSDI diesel engine using EGR cooler. Proceedings of KSAE. Fall Conference, 2004:306-312.
  • [32] Ladommatos N, Abdelhalim SM, Zhao H, Hu Z. The dilution, chemical, and thermal effects of exhaust gas recirculation on diesel engine emissions - part 1: Effect of reducing inlet charge oxygen. SAE Technical Paper 961165. 1996. https://doi.org/10.4271/961165
  • [33] Ladommatos N, Abdelhalim SM, Zhao H, Hu Z. The dilution, chemical, and thermal effects of exhaust gas recirculation on diesel engine emissions - part 2: Effects of carbon dioxide. SAE Technical Paper 961167, 1996. https://doi.org/10.4271/961167
  • [34] Ladommatos N, Abdelhalim SM, Zhao H, Hu Z. The dilution, chemical, and thermal effects of exhaust gas recirculation on diesel engine emissions - part 3: Effects of water vapour. SAE Technical Paper 971659, 1997. https://doi.org/10.4271/971659
  • [35] Kowada M, Hayashi K, Shouyama K, Ihara Y, Sugihara H. Hino’s advanced low-emission technologies developed to meet stringent emissions standards. SAE Technical Paper 2006-01-0275, 2006. https://doi.org/10.4271/2006-01-0275
  • [36] Abarhem M, Hoard J, Assanis DN, Styles D, Curtis EW, Ramesh N et al. Numerical modeling and experimental investigations of EGR cooler fouling in a diesel engine. SAE Technical Paper 2009-01-1506. 2009. https://doi.org/10.4271/2009-01-1506
  • [37] Thonon B, Grandgeorg S, Jallut C. Effect of geometry and flow conditions on particulate fouling in plate heat exchangers. Heat Transfer Eng. 1999;20(3):12-24. https://doi.org/10.1080/014576399271385
  • [38] Stolz A, Fleischer K, Knecht W, Nies J, Strähle R. Development of EGR coolers for truck and passenger car application. SAE Technical Paper 2001-01-1748, 2001. https://doi.org/10.4271/2001-01-1748
  • [39] Grillot JM, Icart G. Fouling of a cylindrical probe and a finned tube bundle in a diesel exhaust environment. Exp Therm Fluid Sci. 1997;(14):442-454. https://doi.org/10.1016/S0894-1777(96)00145-8
  • [40] Abd-Elhady MS, Malayeri MR, Muller-Steinhagen HM. Fouling problems in exhaust gas recirculation coolers in the automotive industry. Heat Transfer Eng. 2011;(32):248-257. https://doi.org/10.1080/01457632.2010.495612
  • [41] Bolt TR, Melo LF. Fouling of heat exchangers. Exp Therm Fluid Sci. 1997;14(4):315. https://doi.org/10.1016/S0894-1777(96)00133-1
  • [42] Park S, Choi K, Kim H, Lee K. Influence of PM fouling on effectiveness of heat exchanges in a diesel engine with fin-type EGR coolers of different sizes. Heat Mass Transfer. 2010;(46):1221-1227. https://doi.org/10.1007/s00231-010-0652-0
  • [43] Styles D, Giuliano JM, Sluder CS, Storey JME, Hoard J, Abarham M. Diesel EGR cooler fouling. SAE Technical Paper 2008-01-2475. 2008. https://doi.org/10.4271/2008-01-2475
  • [44] Hesselgreaves JE. The effect of system parameters on the fouling performance of heat exchangers. Proceedings of the 3rd UK National Conference on Heat Transfer and 1st European Conference on Thermal Sciences. 1992.
  • [45] Williams R, Cook S, Woodall K, Clayton C, Gee M, Mulqueen S et al. Development of an engine test to rate the EGR deposit formation propensity of fuels in light-duty diesel engines. SAE Technical Paper 2020-01-2096. 2020. https://doi.org/10.4271/2020-01-2096
  • [46] Tanaka K, Hiroki K, Kikuchi T, Konno M, Oguma M. Investigation of mechanism for formation of EGR deposit by in situ ATR-FTIR spectrometer and SEM. SAE Int J Engines. 2016;9(4):2242-2249. https://doi.org/10.4271/2016-01-2351
  • [47] Teng H, Regner G. Characteristics of soot deposits in EGR coolers. SAE Int J Fuels Lubr. 2010;2(2):81-90. https://doi.org/10.4271/2009-01-2671
  • [48] Jafarmadar S, Pirouzpanah V, Zehni A. Modeling the effect of EGR on combustion and pollution of direct injection diesel engines with flow field model. 5th International Congress on Chemical Engineering. Kish Island 2008.
  • [49] Abarham M, Zamankham P, Hoard JW, Styles D, Sluder CS, Storey JME et al. CFD analysis of particle transport in axisymmetric tube flows under the influence of thermophoretic force. Int J Heat Mass Tran. 2013;(61):94-105. https://doi.org/10.1016/j.ijheatmasstransfer.2013.01.071
  • [50] Nagendra K, Tafti DK, Viswanathan AK. Modeling of soot deposition in wavy-fin exhaust gas recirculator coolers. Int J Heat Mass Tran. 2011;54(7-8):1671-1681. https://doi.org/10.1016/j.ijheatmasstransfer.2010.10.033
  • [51] Stauch R, Brotz F, Supper J. CFD simulation of the fouling process in EGR coolers. Vehicle Thermal Management Systems. 2011:233-243. https://doi.org/10.1533/9780857095053.3.233
  • [52] Paz C, Suzarez E, Eiris A. et al. Experimental set up for the determination of fouling behaviour in diesel engine exhaust gas recirculation systems. 10th Conference on Energy for a Clean Environment. Lisbon 2009.
  • [53] Paz C, Suarez E, Eiris A, Porteiro J. Development of a predictive CFD fouling model for diesel engine exhaust gas systems. Heat Transfer Eng. 2013;34(8-9):674-682. https://doi.org/10.1080/01457632.2012.738321
  • [54] Suarez E, Paz C, Porteiro J et al. Simulation of the fouling layer evolution in heat transfer surfaces. V European Conference on Computational Fluid Dynamics. Lisbon 2010.
  • [55] Messerer A, Niessner R, Poschl U. Thermophoretic deposition of soot aerosol particles under experimental conditions relevant for modern diesel engine exhaust gas systems. J Aerosol Sci. 2003;34(8):1009-1021. https://doi.org/10.1016/S0021-8502(03)00081-8
  • [56] Kittelson DB. Engines and nanoparticles: a review. J Aerosol Sci. 1998;29(5-6):575-588. https://doi.org/10.1016/S0021-8502(97)10037-4
  • [57] Abd-Elhady MS, Rindt CCM, Wijers JG, Steenhoven AA, Bramer EA, Meer TH. Minimum gas speed in heat exchangers to avoid particulate fouling. Int J Heat Mass Tran. 2004; 47(17-18):3943-3955. https://doi.org/10.1016/j.ijheatmasstransfer.2004.03.024
  • [58] Abd-Elhady M, Malayeri M. Asymptotic characteristics of particulate deposit formation in exhaust gas recirculation (EGR) coolers. Appl Therm Eng. 2013;60(1-2):96-104. https://doi.org/10.1016/j.applthermaleng.2013.06.038
  • [59] Sluder CS, Storey J, Lance MJ, Barone T. Removal of EGR cooler deposit material by flow-induced shear. SAE Technical Paper 2013-01-1292. 2013. https://doi.org/10.4271/2013-01-1292
  • [60] Freeman WB, Middis J, Muller-Steinhagen HM. Influence of augmented surfaces and of surface finish on particulate fouling in double pipe heat exchangers. Chem Eng Process. 1990;27(1):1-11. https://doi.org/10.1016/0255-2701(90)85001-K
  • [61] Kim NH, Webb RL. Particulate fouling of water in tubes having a two-dimensional roughness geometry. Int J Heat Mass Tran. 1991;34(11):2727-2738. https://doi.org/10.1016/0017-9310(91)90231-3
  • [62] Bott TR. Fouling of Heat Exchangers. Elsevier Ltd 1995.
  • [63] Paz C, Suarez E, Concheiro M et al. CFD transient simulation of the fouling of a EGR cooler in a diesel exhaust environment. Proceedings of International Conference on Heat Exchanger Fouling and Cleaning. Budapest 2013.
  • [64] Jaaskelainen H. Diesel Exhaust Gas. 2020. https://dieselnet.com/tech/diesel_exh.php.
  • [65] Yang Z, Winward E, Stobart R, Zhao D, O’Brien G. Modelling the exhaust gas recirculation mass flow rate in modern diesel engines. SAE Technical Paper 2016-01-0550. 2016. https://doi.org/10.4271/2016-01-0550
  • [66] Olsson A. Analysis and measurements of gas flows for engines with EGR. Master of Science Thesis. KTH Industrial Engineering and Management. Stockholm 2012. http://www.divaportal.org/smash/get/diva2:707659/FULLTEXT01.pdf
  • [67] Desantes JM, Galindo J, Guardiola C, Dolz V. Air mass flow estimation in turbocharged diesel engines from incylinder pressure measurement. Exp Therm Fluid Sci. 2010; 34(1):37-47. https://doi.org/10.1016/j.expthermflusci.2009.08.009
  • [68] Wo H, Dearn KD, Song R, Hu E, Xu Y, Hu X. Morphology, composition, and structure of carbon deposits from diesel and biomass oil/diesel blends on a pintle-type fuel injector nozzle. Tribol Int. 2015;(91):189-196. https://doi.org/10.1016/j.triboint.2015.07.003
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-1a39f665-9bc8-4317-adf5-96ea9d91fe46
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.