PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Influence of fiber type and the layer thickness on the stress distribution in composite pipe

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In this work authors presented distribution of circumferential stress in wound composite structures made from different layers. The cylindrical shape specimens were made from layers which have different elastic moduli. Manufactured specimens underwent strength test to obtain distribution of circumferential stress as a function of radius. Circumferential strain on outside surface was measured by fiber optic strain gauge. In order to verify the experimental results were made microscopy specimens, obtained material properties by homogenization method and calculated the strain using analytical approach. In the end, authors compared results obtained from both methods.
Rocznik
Strony
17--20
Opis fizyczny
Bibliogr. 8 poz., rys., tab., wykr.
Twórcy
autor
  • Wroclaw University of Technology, Poland
autor
  • Wroclaw University of Technology, Poland
autor
  • Wroclaw University of Technology, Poland
autor
Bibliografia
  • [1] Eshelby J.D. (1957), The Determination of the Elastic Field of an Ellipsoidal Inclusion and Related Problems, Proceedings of the Royal Society, A241 pp. 376-396.
  • [2] Hamed A. F, Sapuan S. M, Hamdan M. M, Sahari B. B. (2009), Theoretical stress and strain distribution across thick – walled filament wound composite, Polimery, Vol. 54, 559 - 563.
  • [3] Krysiak P., Kaleta J., Kotowski P. (2013), Stanowisko do badań pierścieniowych struktur kompozytowych - projekt, wykonanie, walidacja, Przetwórstwo Tworzyw, nr 6, 601 – 606, Gliwice
  • [4] Lekhnitskii S G (1968), Stress Distribution in a Composite Curvilinear Anisotropic Ring, Anisotropic Plates, Transl. By Tsai S W., Cheron T. New York, 110 – 114.
  • [5] Littlefield A. G, Hyland E. J, Keating J. (2000), 120mm prestressed carbon fiber/thermoplastic overwrapped gun tubes, US Army RDECOMARDEC Benét Laboratories, 1 Buffington St, Watervliet, NY 12189. USA.
  • [6] Митинский А. Н. (1947), Напряжения в толстостеной анизотропной трубе под действием наружного и внутреннего давлений, Сборник Леннградского Ордена Ленина Института Инженеров Железнодорожного Транспорта, Выпуск 136, 55–61. Москва.
  • [7] Velosa J. C, Nunes J. P, Antunes P. J, Silva J. F, Marques A. T. (2007), Development of a new generation of filament wound composite pressure cylinders, Ciencia e Tecnologia dos Materiais, Vol. 19, n ½.
  • [8] Verijenko V. E, Adali S, Tabakov P. Y. (2001), Stress distribution in continuously heterogeneous thick laminated pressure vessels, Composite Structures, 54, 371 – 377. London.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-1a03ac24-1076-4612-9a09-35763e243eab
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.