Features of calculation of durability of machine parts and structural elements under conditions of high asymmetric low-amplitude loads

• Autorzy: Artym V. I. , Faflei O. Y. , Mykhailiuk V. V. , Semenchuk A. V. , Deineha R. O. , Yatsyniak I. I.
• Języki publikacji: EN

Abstrakty

EN

As is known, the process of loading a large number of structures and machinery parts is characterized by a large scatter of asymmetrical stress cycles along its length and in time. In full measure it concerns the elements of the drill string, particularly when drilling deep holes. Therefore, the vast majority of experiments on the determination of the parameters of fatigue resistance is carried out at a symmetric cycle of stresses as a necessary step to calculate the strength of elements of columns, to bring asymmetrical cycles to the equivalent symmetrical.

Słowa kluczowe

EN

fatigue resistance; stresses; durability

• Wydawca: Kielce University of Technology
• Czasopismo: Journal of New Technologies in Environmental Science
• Rocznik: 2018
• Tom: Vol. 2, nr 1
• Strony: 47--57
• Opis fizyczny: Bibliogr. 15 poz., rys., wykr., wzory

Twórcy

autor

Artym V. I.

• Ivano-Frankivsk National Technical University of Oil and Gas

autor

Faflei O. Y.

• Ivano-Frankivsk National Technical University of Oil and Gas

autor

Mykhailiuk V. V.

• Ivano-Frankivsk National Technical University of Oil and Gas

autor

Semenchuk A. V.

• Ivano-Frankivsk National Technical University of Oil and Gas

autor

Deineha R. O.

• Ivano-Frankivsk National Technical University of Oil and Gas

autor

Yatsyniak I. I.

• Ivano-Frankivsk National Technical University of Oil and Gas

Bibliografia

• [1] Gokhale S.: Rotating while packed off may cause unexpected heat-induced drill pipe tensile failures / S. Gokhale, S. Ellis, T. Hill // Associates, Inc., N. Reynolds, SPE. - from IADC/SPE 92429 presented at the LADC/ SPE Drilling Conference held in Amsterdam, Feb. 23-25, 2005. ISBN: 978-1-60423-544-9.
• [2] Abdul-Ameer A.: Drill String Modeling and Stress Analysis / A. Abdul-Ameer // Proceedings of the World Congress on Engineering and Computer Science 2012, October 24-26, 2012, San Francisco, USA. ISBN: 978-988-19252-4-4.
• [3] Fatigue of Drillstring: State of the Art. / O. Vaisberg, O. Vincké, G. Perrin, J. P. Sarda, J.B. Faÿ // Oil & Gas Science and Technology. Vol. 57 (2002), No. 1, pp. 7-37.
• [4] Posterization of the casual loading by the method of the embedded loops / E.I. Kryzhanivsky, V.M. Ivasiv, V.I. Artym, V.M. Nikityuk // IFNTUOG scientific announcer. Oilandgas industrialequipment. Ivano-Frankivsk. 2002. No2, pp. 47-54.
• [5] Pochtyonnui E.K.: Kinetics of tiredness of machine-building constructions / E.K. Pochtyonnui. Mn. : UP «Atri-Feks», 2002, 186 p.
• [6] Mechanics of destruction and durability of materials reference book. Manual / Under a general release of V.V. Panasyuk. Kyiv: Scientific thought, 1988. Volume 10: Durability and longevity of oil and gas equipment / Under release of V.I. Pohmurskyi, E. I. Kryzhanivsky. Lviv - Ivano-Frankivsk: Physic-mechanic institute named G.V. Karpenko NAS Ukraine; Ivano-Frankivsk national technical university of oil and gas, 2006. 1193 p.
• [7] Taking into account of tensions of low level is at the calculations of longevity of details of machines / V.M. Ivasiv, V.I. Artym, P.V. Pushkar etc. // Engineering Science. 2003. No.12, pp. 17-20.
• [8] Determination of remaining resource of pumping barbells is in typical external environments / V .I. Artym, V.M. Ivasiv, Y. T. Fedorovuch etc. // Secret service and development of petroleum and gas deposits. 2005. No. 2, pp. 79-82.
• [9] Oding I. A.: Assumed tensions in an engineer and cyclic durability of metals / I.A. Oding. - M. : Mashgis, 1962, pp. 228-253.
• [10] Illg W.: Fatigue tests on notched and unnotched sheet specimens of 2024-T3 and 7075-T6 aluminium alloys and of SAE 4130 steel with special consideration of the Life Range from 2 to 10000 cycles / W. Illg // NACA TN3886. Aeronautical Structures Laboratory. Langley Field, Va, Dec. 1956.
• [11] Pyndus Y. I.: Prognostication of speed of height of fatigue cracks after a non-permanent overload in aluminium alloys: abstract of thesis of dissertation on the receipt of scientific degree of candidate of engineering sciences: speciality 01.02.04 «Mechanics of the deformed solid» / Y .I. Pyndus; Ternopil state technical university named after Ivan Pulyui. Ternopil. 2002. 19 p.
• [12] Vysotski M. S.: Resistance of tiredness of elements of constructions at a two-frequency ladening / M.S. Vysotski, E. K. Pochtyonnyi, E. O. Parfyonovich // Announcer of engineer. 1995. No. 1, pp. 3-6.
• [13] Bouvet M.: The boring drilling manages / M. Bouvet // Forages. 1973. No. 6, pp. 63-80.
• [14] Ivasiv V.M.: Methods and facilities of management a boring column for providing of her reliability: abstract of thesis of dissertation on the receipt of scientific degree of doctor of engineering sciences: speciality 05.05.12; Ivano-Frankivsk national technical university of oil and gas. Ivano-Frankivsk 1999. p. 31.
• [15] Patent. 21126 Ukraine, IPC E21B 19/00, G01L 1/00. The device for measuring a drill string / Ivasiv V.M., Artym V.I., Kozlov A.A., Chudik I.I., Yurich A.P.; patent owner IFNTUNH. No u 2006 07356; appl. 03.07.2006; opub. 15.01.2007, Bull. No. 1. 4 p.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).