PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Influence of UV aging on some rheological properties of footwear leather

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Zmiana wybranych właściwości reologicznych wierzchnich skór obuwniczych na skutek starzenia pod wpływem promieniowania UV
Języki publikacji
EN
Abstrakty
EN
In this paper authors described rate of aging behavior processes for upper leather materials, which were measured by changes of rheological properties during determination of extension set. Upper leather samples were exposed to UV rays for 100 and 150 hours in Q-SUN XenonTest Chamber, which was used to induce property changes associated with the effects of sunlight. Then, the samples have been subjected to mechanical test –determination of extension set due to PN-EN ISO 17236:2005 standard. The main goal of this analysis was to determine of UV aging resistance of these materials. The highest resistance was observed for full grain bovine leather and nubuck as the opposition to box calfs.
PL
Oceniono wpływ procesów starzenia wierzchnich skórzanych materiałów obuwniczych na zmianę ich właściwości reologicznych przy odkształceniu typu relaksacyjnego. Próbki wierzchnich skór obuwniczych naświetlano przez 100 i 150 h w symulatorze procesu przyśpieszonego starzenia ­Q-SUN Xenon Test Chamber. Oznaczano wydłużenie trwałe naświetlonych próbek według normy ­PN-EN ISO 17236:2005 i na tej podstawie oceniono ich odporność na starzenie powodowane oddziaływaniem promieniowania UV. Największą odporność wykazywały skóry welurowe oraz nubuk, natomiast najmniejszą – boksy bydlęce.
Czasopismo
Rocznik
Strony
617--624
Opis fizyczny
Bibliogr. 36 poz., rys.
Twórcy
  • Institute of Leather Industry, Zgierska 73, 91-462 Łódź, Poland
  • Institute of Leather Industry, Zgierska 73, 91-462 Łódź, Poland
  • Institute of Leather Industry, Zgierska 73, 91-462 Łódź, Poland
  • Institute of Leather Industry, Zgierska 73, 91-462 Łódź, Poland
Bibliografia
  • [1] Ławińska K., Serweta W., Gendaszewska D.: Fibers and Textiles in Eastern Europe 2018, 5 (131), 87. http://dx.doi.org/10.5604/01.3001.0012.2536
  • [2] Ławińska K., Gendaszewska D., Grzesiak E. et al.: Przemysł Chemiczny 2017, 96, 1877. http://dx.doi.org/10.15199/62.2017.9.11
  • [3] Lasek W.: „Materiałoznawstwo obuwnicze”, Wyższa Szkoła Inżynierska im. Kazimierza Pułaskiego w Radomiu, Radom 1986, p. 88.
  • [4] Hulmes D.J.: Journal of Structural Biology 2002, 137 (1–2), 2. https://doi.org/10.1006/jsbi.2002.4450
  • [5] Bueahler M.J.: Proceedings of the National Academy of Sciences 2006, 103 (33), 12285. https://doi.org/10.1073/pnas.0603216103
  • [6] Georgieva L., Krastev K., Angelov N.: Proceedings of the International Conference on Computer Systems and Technologies, Rousse, Bulgaria, 17–18 June 2004, p. 51.
  • [7] Ławińska K., Obraniak A., Modrzewski R.: Fibers and Textiles in Eastern Europe 2019, 2 (134), 107. http://dx.doi.org/10.5604/01.3001.0012.9994
  • [8] Łężak K., Bartkowiak G., Frydrych I.: Przegląd Włókienniczy Włókno, Odzież i Skóra 2011, 3, 31.
  • [9] Łężak K., Bartkowiak G., Frydrych I.: Przegląd Włókienniczy Włókno, Odzież i Skóra 2011, 5, 29.
  • [10] Sionkowska A.: Journal of Photochemistry and Photobiology A: Chemistry 1999, 124 (1–2), 91. https://doi.org/10.1016/S1010-6030(99)00061-1
  • [11] Fujimori E.: European Journal of Biochemistry 1985, 152 (2), 299. https://doi.org/10.1111/j.1432-1033.1985.tb09198.x
  • [12] Liu X., Zhao J., Yang R. et al.: Polimery 2017, 62, 588. http://dx.doi.org/10.14314/polimery.2017.588
  • [13] Kamińska A., Sionkowska A.: Polymer Degradation and Stability 1996, 51, 15. https://doi.org/10.1016/0141-3910(95)00158-1
  • [14] Cheng-Kung L., Latona N.P., DiMaio G.L., Cooke P.: Journal of the American Leather Chemists Association 2008, 103 (6), 167.
  • [15] Isik N.O., Karavana H.A.: Journal of Textile and Apparel, Technology and Management 2012, 22 (1), 64.
  • [16] Horner K.D., Dreissgacker G.: Leather International 2004, 10 (29), 31.
  • [17] Nungesser E., Kar A., Yang D., Hageman B.: Proceedings of the XXIX International Union of Leather Technologists and Chemists Societies Congress, Washington, USA, 2007, p. 1.
  • [18] Sionkowska A., Wess T.: International Journal of Biological Macromolecules 2004, 34, 9. http://dx.doi.org/10.1016/j.ijbiomac.2003.10.001
  • [19] Nalyanya K.M., Migunde O.P., Ngumbu R.G. et al.: Journal of Thermal Analysis and Calorimetry 2016, 123 (1), 363. https://doi.org/10.1007/s10973-015-4851-2
  • [20] O’Leary D.N., Attenburrow G.E.: Journal of Material Science 1996, 31, 5677. https://doi.org/10.1007/BF01160814
  • [21] Serenko O., Nizamova Z., Kalinin M. et al.: Advances in Materials Physics and Chemistry 2014, 4, 13. http://dx.doi.org/10.4236/ampc.2014.42003
  • [22] Persz T.: „Garbarstwo, t. II”, Wydawnictwo Przemysłu Lekkiego i Spożywczego, Warszawa 1966, p. 295.
  • [23] Osaki S.: Advances in Integrative Anatomy and Evolutionary Biology 1999, 2254 (1), 147.
  • [24] Salehi M., Kadim I., Mahgoub O.: Animal Production Science 2014, 54 (5), 638. https://doi.org/10.1071/AN13032
  • [25] Kornaś A.: „Właściwości fizyczne skór – metody badań”, Wydawnictwo Przemysłu Lekkiego i Spożywczego, Warszawa 1965, p. 151.
  • [26] Thornton J.H.: “Textbook of Footwear Materials”, The National Trade Press LTD, London 1953, p. 10.
  • [27] Zhang Y., Mansel B.W., Naffa R. et al.: ACS Sustainable Chemistry and Engineering 2018, 6, 7096. http://dx.doi.org/10.1021/acssuschemeng.8b00954
  • [28] Basil-Jones M.M., Edmonds R.L., Norris G.E., Haverkamp R.G.: Journal of Agricultural and Food Chemistry 2012, 60, 1201. http://dx.doi.org/10.1021/jf2039586
  • [29] Basil-Jones M.M., Edmonds R.L., Cooper S.M. et al.: Journal of Agricultural and Food Chemistry 2013, 61, 12327. http://dx.doi.org/10.1021/jf4038375
  • [30] Wells H.C., Edmonds R.L., Kirby N. et al.: Journal of Agricultural and Food Chemistry 2013, 61, 11524. http://dx.doi.org/10.1021/jf4041854
  • [31] Saravanabhavan S., Thanikaivelan P., Raghava R. et al.: Environmental Science & Technology 2004, 38, 871. http://dx.doi.org/10.1021/es034554o
  • [32] Chernoff E.A.G., Chernoff D.A.: Journal of Vacuum Science and Technology 1992, 10 (4), 596. https://doi.org/10.1116/1.577736
  • [33] Ławińska K., Serweta W., Modrzewski R.: Fibers and Textiles in Eastern Europe 2018, 5 (131), 81. http://dx.doi.org/10.5604/01.3001.0012.2536
  • [34] Ławińska K., Serweta W., Modrzewski R.: Przemysł Chemiczny 2019, 1, 106. http://dx.doi.org/10.15199/62.2019.1.16
  • [35] Łagan S., Liber-Kneć A.: Engineering of Biomaterials 2014, 128/129, 61.
  • [36] Sturrock E.J., Boote C., Attenburrow G.E., Meek K.M.: Journal of Materials Science 2004, 39, 2481. https://doi.org/10.1023/B:JMSC.0000020013.90114.92
Uwagi
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-19981aac-d7ac-425f-8cfa-28a04f7adbe3
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.