Application of FMEA in the Quality Estimation of Metal Matrix Composite Castings Produced by Squeeze Infiltration

• Autorzy: Gawdzińska K. , Chybowski L. , Przetakiewicz W. , Laskowski R.

Identyfikatory

DOI

10.1515/amm-2017-0320

• Języki publikacji: EN

Abstrakty

EN

Metal matrix composites (MMCs) are still scarcely described due to various combinations of used materials and a wide array of technologies. Applying the Failure Mode and Effect Analysis (FMEA) method to describe the quality of metal composite castings may contribute to eliminating specific (characteristic only to these materials) defects. This part of the analysis determines the criticality numbers, meaning the frequency of a given failure, detectability level and significance of a given failure to the group of specific composite casting failures. It contributes to establishing the priority number (P), which is a measure used to assess risk, a notion essential in discussing quality in a composite casting.

Słowa kluczowe

EN

quality; casting; metal matrix composites; MMC; failure modes and effects analysis; FMEA; material defects; failures

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 4
• Strony: 2171--2182
• Opis fizyczny: Bibliogr. 19 poz., rys., tab.

Twórcy

autor

Gawdzińska K.

• Maritime University of Szczecin, Faculty of Marine Engineering, Department of Shipbuilding Materials Engineering, 2-4 Willowa Str., 71-650 Szczecin, Poland

autor

Chybowski L.

• Maritime University of Szczecin, Faculty of Marine Engineering, Marine Propulsion Plants Department, 1-2 Wały Chrobrego Str., 70-500 Szczecin, Poland

autor

Przetakiewicz W.

• Maritime University of Szczecin, Faculty of Marine Engineering, Department of Shipbuilding Materials Engineering, 2-4 Willowa Str., 71-650 Szczecin, Poland

autor

Laskowski R.

• BP maritime Services (Singapore) Pte. Limited, 1 Harbour Front Avenue, #0201 Keppel Bay Tower, Singapore 098632

Bibliografia

• [1] K. Gawdzińska, Materiałowo-technologiczne uwarunkowania jakości odlewów z metalowych materiałów kompozytowych, Wydawnictwo Archives of Foudry Engineering Katowice-Gliwice 2012.
• [2] K. Manu Sree, L. Raag, T.P.D. Rajan et al., Liquid Metal Infiltration Processing of Metallic Composites: A Critical Review, Metallurgical And Materials Transactions B-Process Metallurgy And Materials Processing Science 47, 5, 2799-2819 (2016).
• [3] K. Gawdzińska, L. Chybowski, A. Bejger, S. Krile, Determination of technological parameters of saturated composites based on sic by means of a model liquid, Metalurgija 55, 4, 659-662 (2016).
• [4] J. Braszczyński, Teoria procesów odlewniczych, PWN, Warsaw 1989.
• [5] M. Perzyk, S. Waszkiewicz, M. Kaczorowski, A. Jopkiewicz, Odlewnictwo. Warsaw WNT 2000.
• [6] ISO 9000:2015 Standard. Quality management systems – Fundamentals and vocabulary.
• [7] ISO 9001:2015 Standard. Quality management systems – Requirements.
• [8] A. Hamrol, W. Mantura, Zarządzanie jakością. Teoria i praktyka, third edition, updated, PWN, Warsaw 2006.
• [9] Foundations of Effective FMEAs. Rev. 9.1. Reliasoft, Tucson 2012.
• [10] J. Sobczak, Teoretyczne i praktyczne podstawy procesu prasowania w stanie ciekłym (squeeze casting) metali nieżelaznych, Prace Instytutu Odlewnictwa nr 41, Cracow 1993.
• [11] A. Gatto, L. Iuliano, E. Atzeni et al., On the behaviour of reinforcements beneath the surface in turning of metal-matrix composites (MMCs), Journal of Composite Materials 50, 18, 2487-2494 (2016).
• [12] A. Klasik, J. Sobczak, K. Pietrzak, Changes in properties of aluminum matrix composites reinforced with SiC particles after multiple remelting, Materials Research Innovations 15, Supplement 1, S249-S252 (2011).
• [13] K. Gawdzińska, L. Chybowski, W. Przetakiewicz, Proper matrix-reinforcement bonding in cast metal matrix composites as a factor of their good quality, Archives of Civil and Mechanical Engineering 16 (3), 553-563 (2015).
• [14] J. Sobczyk, L. Drenchev, Metalic Functionally Graded Materials: A Specific Class of Advanced Composites, Journal of Material Science and Technology 29, 4, 297-316 (2013).
• [15] J. Sobczak, Metalowe materiały kompozytowe, Instytut Odlewnictwa 1996.
• [16] D. Książek, M. J. Ligarski, Analysis of the functions and place of quality management systems in the context of an organization’s development – a survey of the Polish Quality Award contest: Scientific Journals of the Maritime University of Szczecin, Zeszyty Naukowe Akademii Morskiej w Szczecinie 44, 116, 182-186 (2015).
• [17] M. Molenda, Knowledge as a determinant in developing a quality management system: Scientific Journals of the Maritime University of Szczecin, Zeszyty Naukowe Akademii Morskiej w Szczecinie 39, 111, 116-121 (2014).
• [18] L. Chybowski, K. Gawdzińska, W. Przetakiewicz, AHP based multi-criteria function analysis as a TRIZ tool for complex technical systems: Proceedings of the 13th MATRIZ TRIZfest 2017 International Conference, International TRIZ Association – MATRIZ, Knoxville 2017, 31-45.
• [19] J. M. Ścierski, The use of quality management systems for limiting the risk of business processes: Scientific Journals of the Maritime University of Szczecin, Zeszyty Naukowe Akademii Morskiej w Szczecinie 32, 104, 108-114 (2012).

Uwagi

EN

The publication funded by Ministry of Science and Higher Education of Poland from Grant 1/S/IESO/17 “Increasing operational effectiveness of complex technical systems by systematic development and implementation of innovations using novel materials and modifying the object’s structure”.

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).