Segregation of Admixing Elements in the Boundary Layer of the Main Inlet of a Ductile Iron Casting

• Autorzy: Borowiecki B. , Mak S.
• Języki publikacji: EN

Abstrakty

EN

The object of the present paper is to determine the distribution of admixing elements, such as magnesium, manganese, silicon and sulfur, in the boundary layer of the main inlet of a ductile iron casting. The authors also intend to demonstrate the influence of elements diffusing from the casting mold, such as oxygen and silica, on the chemical composition of the boundary layer of the casting.

Słowa kluczowe

EN

ductile iron; nodular graphite; boundary layer

PL

żeliwo sferoidalne; grafit sferoidalny; warstwa przyścienna

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2013
• Tom: Vol. 13, iss. 2 spec.
• Strony: 10--17
• Opis fizyczny: Bibliogr. 9 poz., rys., tab., wykr.

Twórcy

autor

Borowiecki B.

• Faculty of Mechanical Engineering and Mechatronics, West Pomeranian University of Technology in Szczecin, al. Piastów 19, 70-310 Szczecin, Poland

autor

Mak S.

• Faculty of Mechanical Engineering and Mechatronics, West Pomeranian University of Technology in Szczecin, al. Piastów 19, 70-310 Szczecin, Poland

Bibliografia

• [1] Rudnik, S. (1996). Metals science. Warszawa:Wydawnictwo naukowe PWN.
• [2] Pietrowski, S. & Gumienny, G. (2012). Microsegregation in nodular cast iron with carbides. Archives of Foundry Engineering. 12 (4), 127-134.
• [3] Piaskowski, J., Jankowski, A. (1974). Ductile iron. Warszawa: Wydawnictwa Naukowo-Techniczne.
• [4] Selig, C. & Lacaze, J. (2000). Study of microsegregation buildup during solidification of spheroidal graphite cast iron. Metallurgical and Materials Transactions. 31B, 827-836.
• [5] Myszka, D. & Faterkowska, M. (2006). The use of image analysis to quality measurements of ductile iron and other cast materials. Archives of Foundry. 6(18). 51-56.
• [6] Hasse, S. (2005). Low alloyed cast iron with nodular graphite. Giesserei-Praxis. 8, 293-301.
• [7] Perzyk, M., Waszkiewicz, S., Kaczorowski, M., Jopkiewicz, A. (2000). Foundry. Warszawa: Wydawnictwa Naukowo-Techniczne.
• [8] Borowiecki, B. (2008). Conventional flow curves of liquid cast iron put ion spheroidization, Solidifaction of Metals and Alloys. 40, 20-23.
• [9] Borowiecki, B. & Sobiecka, E. (2012). Correlation between surface roughness and rheological properties of liquid ductile cast iron. Archives Foundry Engineering. 12(2), 5-8.