PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Inverse methods in corrosion research and materials degradation

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Metody odwrotne w badaniach korozji i degradacji materiałów
Języki publikacji
EN
Abstrakty
EN
Applications of inverse methods in corrosion research and materials degradation are demonstrated. Two examples concern corrosion of reinforcement in concrete structures and one concerns a blast furnace. In the first example, a diffusion model and diffusion with reactions model are used to determine a chloride diffusion coefficient in concrete which can be applied to predict the lifetime of a building construction. In the second example, determination of corrosion state based on solution of inverse problems defined for transient response (galvanostatic pulse method) is shown. Finally, it is demonstrated how the inverse problem of the heat transport can be used to estimate degradation of refractory material being in contact with molten metal based on temperature readings in selected locations of the blast furnace.
PL
Przedstawiono zastosowania metody odwrotnej w badaniach nad korozją i degradacją materiałów. Dwa przykłady dotyczą korozji zbrojenia stalowego w konstrukcjach żelbetowych, a jeden dotyczy wielkiego pieca. W pierwszym przykładzie, model dyfuzyjny oraz dyfuzyjno- reakcyjny zostały użyte do wyznaczenia współczynnika dyfuzji chlorków betonie, który następnie może być wykorzystany w celu oszacowania czasu użytkowania konstrukcji budowlanej. W drugim przykładzie oszacowanie stanu procesu korozyjnego dokonano na podstawie rozwiązania problem odwrotnego zdefiniowanego dla czasowej odpowiedzi potencjałowej (metoda impulsu galwanostatycznego). Ostatni przykład demonstruje jak metoda odwrotna może być wykorzystana do problemu transport ciepła w celu oceny degradacji wyłożenia ogniotrwałego będącego w kontakcie ze stopionym metalem w oparciu o odczyty temperatury wielkiego pieca w wybranych punktach.
Rocznik
Tom
Strony
358--363
Opis fizyczny
Bibliogr. 25 poz., rys., tab., wykr.
Twórcy
autor
  • Akademia Górniczo-Hutnicza w Krakowie, Wydział Inżynierii Materiałowej i Ceramiki, al. Mickiewicza 30, 30-059 Kraków
  • Akademia Górniczo-Hutnicza w Krakowie, Wydział Inżynierii Materiałowej i Ceramiki, al. Mickiewicza 30, 30-059 Kraków
Bibliografia
  • [1] Andrade M., M. Castellote, C. Alonso, C. Gonzales. 2000. “Non-steady-state chloride diffusion coefficients obtained from migration and natural diffusion tests. Part 1: Comparison between several methods of calculation”. Mater. Struct. 33 : 21–28.
  • [2] Bhatti M. A. 2000. Practical Optimization Methods. New York: Springer-Verlag.
  • [3] Birbilis N., B. W. Cherry, M. Forsyth, K. M. Nairn. 2001. “Monitoring corrosion of concrete reinforcement using galvanostatic pulses”. in: Proceedings Corrosion and Prevention. Paper no. 85. Newcastle, Australia.
  • [4] Dziembaj P. 2017. Modelling of heat transfer in carbon based isolating materials – Shape determination of blast furnace hearth lining PhD Thesis. Krakow AGH University of Science and Technology.
  • [5] Feliu V., A. Cobo, J.A. Gonzalez, S. Feliu. 2002. “Nonexponential transients resulting from application of the interruption technique to assess corrosion rate of steel in concrete”. Corrosion 58 (1) : 72–81.
  • [6] Glass G. K., C .L. Page, N. R. Short, S.W. Yu. 1993. “An investigation of galvanostatic transient methods used to monitor the corrosion rate of steel in concrete”. Corros. Sci. 35 (5–8) : 1585–1592.
  • [7] Gonzalez J. A., A. Cobo, M. N. Gonzalez, S. Feliu. 2001. “On-site determination of corrosion rate in reinforced concrete structures by use of galvanostatic pulses”, Corr. Sci. 43 : 611−625.
  • [8] Gonzalez J. A., A. Cobo, M. N. Gonzalez, S. Feliu. 2001. “On-site determination of corrosion rate in reinforced concrete structures by use of galvanostatic pulses”. Corros. Sci. 43 : 611–625.
  • [9] Gonzalez J. A., A. Molina, M. L. Escudero, C. Andrade. 1985. “Errors in the electrochemical evaluation of very small corrosion rates – II. Other electrochemical techniques applied to corrosion of steel in concrete”. Corros. Sci. 25 (7) : 519–530.
  • [10] Gonzalez J. A., A. Molina, M. L. Escudero, C. Andrade. 1985. “Errors in the electrochemical evaluation of very small corrosion rates – I. polarization resistance method applied to corrosion of steel in concrete”. Corros. Sci. 25 (10) : 917–930.
  • [11] Guettala A., A. Abibsi. 2006. “Corrosion degradation and repair of a concrete bridge”. Mater. Struct. 39 : 471–478.
  • [12] http://www.ansys.com/ [access date 15.09.2017].
  • [13] http://www.comsol.com/ [access date 15.09.2017].
  • [14] Huyer W., A. Neumaier. 1999. “Global optimization by multilevel coordinate search”. Journal of Global Optimization 14 : 331–355.
  • [15] Justnes H. 1998. “A review of chloride binding in cementitious systems”. Nord Concr. Res. 21 : 1–6.
  • [16] Machulec B., J. Buzek. 2009. “Ocena stanu wyłożenia ogniotrwałego garu i trzonu wielkiego pieca na podstawie pomiaru temperatur”. Hutnik – Wiadomości Hutnicze 12 : 857–860.
  • [17] Orazem M. E., B. Tribollet. 2017. Electrochemical Impedance Spectroscopy Wiley 2nd Ed.
  • [18] Quarteroni A., R. Sacco, F. Saleri. 2007. Numerical Mathematics. New York: Springer-Verlag.
  • [19] Stern M., A. L. Geary, 1957. “Electrochemical polarization. A theoretical analysis of shape of polarization curves”. J. Electrochem. Soc. 104 : 56-63.
  • [20] Szyszkiewicz K., J. J. Jasielec, A. Krolikowska, R. Filipek. 2017. “Determination of chloride diffusion coefficient in cement-based materials – A review of experimental and modeling methods: Part I – Diffusion methods”. Cement-Wapno-Beton 1 : 52–67.
  • [21] Tang L. 1996. Chloride transport in concrete – measurement and prediction. PhD thesis. Gothenburg, Sweden: Chalmers University of Technology.
  • [22] Tuutti K. 1982. Corrosion of steel in concrete. Stockholm: (CBI), Report No. 4 82; Swedish Cement and Concrete Research Institute.
  • [23] www.wolfram.com/mathematica/ [access date 15.09.2017].
  • [24] Yuan Q., C. Shi, G. De Schutter, K. Audenaert, D. Deng. 2009. “Chloride binding of cement-based materials subjected to external chloride environment – a review”. Construct Build Mater 23 : 1–13.
  • [25] Zibara H. 2001. Binding of external chlorides by cement pastes. PhD thesis. Canada : University of Toronto.
Uwagi
This work was supported by the Polish National Centre for Research and Development Grant No. K1/IN1/25/153217/NCBiR/12 and Grant AGH No.11.11.160.768.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-18987273-8a6c-4ede-afcd-582dc9a8dbd1
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.