Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
This experiment is concentrated on the working fluid of the heat pipe. The working fluid is an important part for the function of the heat pipe regarding the transfer of the heat. The measurements point out the appropriate quantity of the working fluid regarding the correct function of the loop heat pipe in the cooling of electronic components.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
29--31
Opis fizyczny
Bibliogr. 11 poz., fot., tab., wykr.
Twórcy
autor
- University of Žilina, Slovakia
autor
- University of Žilina, Slovakia
autor
- University of Žilina, Slovakia
autor
- University of Žilina, Slovakia
Bibliografia
- [1] Cheung M.K. et al.: Thermal Performance and Operational Characteristics of Loop Heat Pipe, Proceedings of the 28th International Conference on Environmental Systems, Society of Automotive Engineers, Paper No. 981813, 1988.
- [2] Kaya T. et al: Investigation of Low Power Start-Up Characteristics of Loop Heat Pipe, Space Technology and Applications International Forum, CP458, 1999, pp. 799-804.
- [3] Huzvar J., Nosek R.: Impact of fuel supply to concentrations of emissions in domestic boiler. In: Power control and optimization, proceeding of fourth global conference: 2-4 December 2010, Kuching, Malaysia, 2010.
- [4] Riahi A. et al.: Experimental Investigation on the Performance of thermosyphon solar water heater in the south caspian see, THERMAL SCIENCE, Vol. 15, No. 2, 2011, pp. 447-456.
- [5] Close D.J.: The Performance of Solar Water Heaters with Natural Circulation, Solar Energy, 6, 1, 1962, pp. 33-40.
- [6] Gupta C.L., Garg, H.P.: System Design in Solar Water Heaters with Natural Circulation, Solar Energy, 12, 2, pp. 163-182, 1968.
- [7] Ong K.S.: A Finite-Difference Method to Evaluate the Thermal Performance of a Solar Water Heater, Solar Energy, 16, 3-4, 1974, pp. 137-147.
- [8] Zerrouki A., Boumedien A., Bouhadef K.: The Natural Circulation Solar Water Heater Model with Linear Temperature Distribution, Renewable Energy, 26, 4, 2002, pp. 549-559.
- [9] Faghri A.: Heat Pipe Science and Technology, Taylor & Francis, Washington DC, 1995.
- [10] Lenhard R.: Numerical simulation device for the transport of geothermal heat with forced circulation of media, Proceedings of the Power control and optimization, 4, 2010.
- [11] Kapjor A., Kosecová A., Papučík Š.:Influence of construction parameters to heat output of floor convector, Proceedings of the TRANSCOM, 6, 2005, pp. 69-72.
Uwagi
EN
This article was elaborated within the solution of KEGA 064ZU-4/2012.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-18954cff-88e0-44c5-91d6-9501c30694d0