Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Pure and aluminum doped zinc oxide nanoparticles were prepared by soft chemical method. The prepared nanoparticles were characterized by XRD, SEM-EDAX, UV-Vis, PL and FT-IR studies. XRD patterns revealed that the nanoparticles were crystallized in hexagonal wurtzite structure with an average particle size of 19 nm to 26 nm. The surface morphology was explored using SEM micrographs. The incorporation of aluminum was confirmed by EDAX and FT-IR studies. The band gaps of the particles were found from 3.48 eV to 3.53 eV through UV-Vis spectral studies. The defect related mechanism was investigated using PL measurements. The chemical functional groups in FT-IR spectra proved the formation of pure and aluminum doped zinc oxide nanoparticles.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
205--212
Opis fizyczny
Bibliogr. 30 poz., rys., tab.
Twórcy
autor
- Department of Physics, Kongu Engineering College, Perundurai, Tamilnadu – 638 052, India
autor
- Department of Physics, KSR Institute for Engineering and Technology, Tiruchengode, Namakkal, Tamilnadu – 637 215, India
Bibliografia
- [1] OZGUR U., ALIVOV YA.I., LIU C., TEKE A., RESHCHIKOV M.A., DOGAN S., AVRUTIN V., CHO S.J., MORKOC H., J. Appl. Phys., 98 (2005), 041301.
- [2] KALANDARAGH Y., KHODAYARI A., BEHBOUDNIA M., Mat. Sci. Semicon. Proc., 12 (2009), 142.
- [3] SHUI A., WANG S., WANG H., CHENG X., J. Ceram. Soc. Jpn., 117 (2009), 703.
- [4] SARAVANAKUMAR K., RAVICHANDRAN K., J. Mater. Sci.-Mater. El., 23 (2012), 1462.
- [5] KHAN W., KHAN Z. A., SAAD A., SHERVANI S., SALEEM., NAQVI H., Int. J. Mod. Phys., 22 (2013), 630.
- [6] VISWANATHA R., ARTHOBA NAYAK Y., VENKATESHA T.G., VIDYASAGAR C., Nanosci. Nanotech.-Int. J., 3 ( 2013), 16.
- [7] ULLAH R., DUTTA J., J. Hazard. Mater., 156 (2008), 194.
- [8] KANT S., KUMAR A., Adv. Mat. Lett., 3 (2012), 350.
- [9] UDAYAKUMAR S., RENUKA V., KAVITHA K., J. Chem. Pharm. Res., 4 (2012), 1271.
- [10] MILENOVA K., STAMBOLOVA I., BLASKOV V., ELIYAS A., VASSILEV S., SHIPOCHKA M., J. Chem. Technol. Metall., 48, 3(2013), 259.
- [11] LEE T., SUE H., CHENG X., Nanoscale Res. Lett., 6 (2011), 1.
- [12] DHINGRAA M., SINGHA N. K., SHRIVASTAVAB S., SENTHIL KUMAR P., ANNAPOORNI S., Sensor. Actuat. A-Phys., 190 (2013), 168.
- [13] AREFI M., ZARCHI S., IMANI S., Afr. J. Biotechnol., 11 (2012), 8520.
- [14] RENGANATHAN B., SASTIKUMAR D., GOBI G., RAJESWARI YOGAMALAR N., CHANDRA BOSE A., Sensor. Actuat. B-Chem., 156 (2011), 263.
- [15] NAVALE S.C., RAVIA V., MULLA I.S., GOSAVI S.W., KULKARNI S.K., Sensor. Actuat. B-Chem., 126 (2007), 382.
- [16] DWIVEDIA C., DUTTA V., AIP Adv., 3 (2013), 32127.
- [17] PITICESCU R.R., PITICESCU R.M., MONTY C.J., J. Eur. Ceram. Soc., 26 (2006), 2979.
- [18] CHEN K.J., FANG T.H., HUNG F.Y., JI L.W., CHANG S.J., YOUNG S.J., HSIAO Y.J., Appl. Surf. Sci., 254 (2008), 5791.
- [19] ZHANG Y., YANG Y., ZHAO J., TAN R., WANG W., CUI P., SONG W., J. Mater. Sci., 46 (2011), 774.
- [20] KADAM P., AGASHE C., MAHAMUNI S., J. Appl. Phys., 104 (2008), 103501.
- [21] KONG J., FAN D., ZHU Y., Mat. Sci. Semicon. Proc.,15 (2012), 258.
- [22] RAOUFI D., Renew. Energ., 50 (2013), 932.
- [23] WAHAB R., HWANG I., KIM Y., MUSARRAT J., SIDDIQUI M., KEE SED H., TRIPATHY S., SHIN H., Chem. Eng. J., 175 (2011), 450.
- [24] SINGH D.K., PANDEY D.K., YADAV R.R., SINGH D., Pramana-J. Phys., 78 (2012), 759.
- [25] SAMUEL S., BOSE L., GEORGE., SB Acad. Rev., 16 (2009), 57.
- [26] KHAN Z.R., ARIF M., SINGH A., Int. Nano Lett., 2 (2012), 1.
- [27] ZANDI S., KAMELI P., SALAMATI H., AHMADVAND H., HAKIMI M., Physica B, 406 (2011), 3215.
- [28] GRABOWSKA J., NANDA K.K., MCGLYNN E., MOSNIER J.P., HENRY M.O., BEAUCAMP A., MEANEY A., J. Mater. Sci.-Mater. El., 16 (2005), 397.
- [29] PENG W.Q., QU S.C., CONG G.W., WANG Z.G., Mat. Sci. Semicon. Proc., 9 (2006), 156.
- [30] WANG R., TSAI C., Appl. Phys. A-Mater., 94 (2009), 241
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-188fbcdf-ce3c-4f50-ae8d-2f5d78c4f27a