PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Predictive maintenance techniques for wear reducing and elimination of equipment failures in hydrostatic drive systems

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Maintenance is a very important activity, which is necessary for the good operation of any technical system, even for the hydraulic drive systems. The predictive maintenance evaluates the state of technical performances of a system, by identifying the wear and thus avoiding the failures of the equipment. Using three methods of the predictive maintenance, namely infrared thermography, vibration analysis and oil analysis, the authors present their results of an experimental research on hydraulic pumps. The authors obtained thermograms, vibration spectra and diagrams of the oil contaminants which helped them indicate the proper or the malfunction of the studied pumps. Although they were only made on pumps, their investigations highlight the need of widely implementation of these modern and efficient methods in the industrial activities for the quick monitoring of the hydraulic machinery and equipment wear, before their failure occurs. Obviously, the goal is to have strong maintenance instruments in hydraulic drive systems diagnosis.
PL
Konserwacja to bardzo ważna czynność, niezbędna do prawidłowego działania każdego systemu technicznego, nawet hydraulicznych układów napędowych. Konserwacja predykcyjna ocenia stan wydajności technicznej systemu poprzez identyfikację zużycia i unikanie w ten sposób awarii urządzeń. Wykorzystując trzy nowoczesne metody konserwacji predykcyjnej, tj. termografię w podczerwieni, analizę drgań i analizę oleju, autorzy przedstawiają wyniki badań eksperymentalnych hydraulicznych pomp. Autorzy uzyskali termogramy, widma drgań i diagramy zanieczyszczeń olejowych, które pomogły wskazać prawidłową lub nieprawidłową pracę badanych pomp. Chociaż zostały wykonane tylko na pompach, ich badania podkreślają potrzebę szerokiego wdrażania tych nowoczesnych i efektywnych metod w działalności przemysłowej do szybkiego monitorowania zużycia maszyn i urządzeń hydraulicznych, zanim dojdzie do ich awarii. Oczywiście celem jest posiadanie mocnych narzędzi konserwacyjnych w diagnostyce hydraulicznych układów napędowych.
Czasopismo
Rocznik
Tom
Strony
36--45
Opis fizyczny
Bibliogr. 21 poz., rys., zdj.
Twórcy
  • Hydraulics and Pneumatics Research Institute INOE 2000 – IHP, 14 Cutitul de Argint Street, Bucharest, Romania
  • Hydraulics and Pneumatics Research Institute INOE 2000 – IHP, 14 Cutitul de Argint Street, Bucharest, Romania
  • KOMAG Institute of Mining Technology, Pszczyńska 37, 44-100 Gliwice, Poland
  • Hydraulics and Pneumatics Research Institute INOE 2000 – IHP, 14 Cutitul de Argint Street, Bucharest, Romania
Bibliografia
  • [1] Duffuaa S.O., Raoul A.: Planning and control of maintenance systems. Modelling and analysis. 2nd Edition, Springer 2015.
  • [2] https://www.semanticscholar.org/paper/Maintenance-performance-metrics-a-state-of-the-art- Kumar Galar/65d35c09f9ccd068dafae30bc222b2c5fab9a3e1/figure/8 [accessed: 15.10.2020].
  • [3] Mobley R.K.: Maintenance Engineering Handbook. 7th Edition. McGraw-Hill. Section 7. Instruments and Reliability Tools 2008.
  • [4] NTT Inc. - What’s The Impact of Predictive Maintenance Programs? https://www.nttinc.com/blog/whatsthe- impact-of-predictive-maintenance [accessed: 15.10.2020].
  • [5] Bernet J.: Vantaggi relativi all’analisi delle vibrazioni, Fluke Nota applicativa http://www.farnell.com/datasheets/1600460.pdf [accessed: 15.10.2020].
  • [6] Hajianto M.R., Yulianto A.: Vibration analysis for monitoring the condition of hydraulic powerpack for underground mining supporting simulation at education and training unit of underground mining (ETUUM). American Journal of Engineering (AJER) 2017. 6(5), pp. 123-129, e-ISSN:2320-0487 p- ISSN:2320.
  • [7] Prasojo H. A.: Hydraulik Powerpak, (BDTBT). Sawahlunto, 2014.
  • [8] Sihombing S.: Kalibrasi Mesin Pompa Sentrifugal Single Stage terhadap Respon Getaran Untuk Daerah Axial dan Vertikal. VISI 2009, 17 (2), pp.108-131.
  • [9] Bakhri S.: Investigasi Pemantuan Kondisi Vibrasi Untuk Keselamatan Operasi Pompa Pendingin PWR. Sigma Epsilon 2013. 17(3), pp. 88-101.
  • [10] Kelly S.G.: Fundamentals of Mechanical Vibration. Second Edition. Mc Graw Hill 2000.
  • [11] Harjono R. N., Sukmadi T., Karnoto: Permanfaatan Spektrum Vibrasi Untuk Mnegindkasikan Kerusakan Motor Induksi di PLTU Indramayu 3x 330 MW. Transient 2013. 2(3), pp. 408-414.
  • [12] Marinescu A.D., Safta C.A., Popescu T.C., Cristescu C.: Maintenance of hydraulic drive systems via vibroacoustic diagnosis. 18th Multidisciplinary Conference ”Professor Dorin Pavel – founder of Romanian Hydropower”- Cluj Napoca, 2018, June 1-2. Revista "ȘTIINȚĂ ȘI INGINERIE" ("SCIENCE AND ENGINEERING" Magazine) 2018. 34, pp. 247-256, ISSN 2067-7138 https://stiintasiinginerie.ro/34-29- mentenanta-sistemelor-de-actionare-hidraulica-prin-diagnoza-vibroacustica [accessed: 17.10.2020].
  • [13] Marinescu A. D., Orășanu N., Safta C. A., Cristescu C.: Vibroacoustic predictive investigations on normal or defective operation of hydrostatic pumps. In Proceedings of the 25th International Conference on Hydraulics and Pneumatics – Hervex 2019, November 13-15, Băile Govora, România. pp. 169-176 http://www.fluidas.ro/hervex/proceedings2019/pp.169-176.pdf
  • [14] Mačužić I., Jeremić B.: Proactive approach to oil maintenance strategy. Tribology in industry 2004. 26 (1&2). pp. 27-31http://www.tribology.rs/journals/2004/1-2/5.pdf
  • [15] https://manualzz.com/doc/6598462/laser-cm20__park%20Erhfde [accessed: 17.10.2020].
  • [16] http://arpee.org.ro/strategia-europa-2020-programul-20-20-20/ [accessed: 18.10.2020].
  • [17] Dhillon B.S.: Engineering Maintenance. A Modern Approach. CRC Press 2002, pp. 13-15.
  • [18] Mobley R. K. (ed.): Maintenance Engineering Handbook. 7th Edition. Section 7. Instruments and Reliability Tools (by Mobley R. Keith), pp. 7.105-125. McGraw-Hill 2008.
  • [19] Childs P. R N.: Practical Temperature Measurement. Butterworth Heinemann 2001, pp. 238-287.
  • [20] Mihai Al.: Termografia în infraroşu. Fundamente. Ed. Tehnică, Bucureşti 2005.
  • [21] Marinescu A. D., Cristescu C., Popescu T. C., Safta C. A.: Assessing the opportunity to use the infrared thermography method for predictive maintenance of Hydrostatic Pumps. In: Proceedings of the 8th International Conference for Energy and Environment (CIEM), University Politehnica of Bucharest, October (19-20), 2017, #127, in Section Hydro Power Engineering, pp. 270-274; DOI:10.1109/CIEM.2017.8120790
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-1848236f-a04e-4f9e-a632-9e748304ed3b
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.