Effect of the carbides and matrix on the wear resistance of nodular cast iron

• Autorzy: Gumienny G.
• Języki publikacji: EN

Abstrakty

EN

This paper presents the results of the abrasive wear resistance of selected types of nodular cast iron, including ADI, cooperating with quartz sand and 100 grit abrasive paper. It has been shown that carbides in nodular cast iron cause an increase in wear resistance of 6 to 12% depending on the surface fraction of the carbides and type of the matrix. For the same unit pressure the mass loss of the cast iron cooperating with quartz sand is many times larger than the cast iron cooperating with abrasive paper. For both abrasives the highest wear resistance showed nodular cast iron with upper and lower bainite and carbides.

Słowa kluczowe

EN

wear resistant alloy; carbidic nodular cast iron; wear resistance; ADI

PL

stop odporny na ścieranie; żeliwo sferoidalne; odporność na zużycie; ADI

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2013
• Tom: Vol. 13, iss. 3
• Strony: 25--29
• Opis fizyczny: Bibliogr. 6 poz., rys., tab., wykr.

Twórcy

autor

Gumienny G.

• Department of Materials Engineering and Production Systems, Lodz University of Technology, Stefanowskiego 1/15 Street, 90-924, Łódź, Poland

Bibliografia

• [1] Pietrowski, S. & Gumienny, G. (2010). Bainite obtaining in cast iron with carbides castings. Archives of Foundry Engineering. 10(1), 109-114.
• [2] Gumienny, G. (2010). Bainitic-martensitic nodular cast iron with carbides. Archives of Foundry Engineering. 10(2), 63-68.
• [3] Gumienny, G. (2010). Chromium and copper influence on the nodular cast iron with carbides microstructure. Archives of Foundry Engineering. 10(4), 47-54.
• [4] Gumienny, G. (2011). Wear resistance of nodular cast iron with carbides. Archives of Foundry Engineering. 11(3), 81-88.
• [5] Gumienny, G. (2012). The Effect of Nodular Cast Iron Metal Matrix on the Wear Resistance, Archives of Foundry Engineering. 12(2), 179-186.
• [6] Rapiejko, C., Fouvry, S., Grosgogeat, B. & Wendler, B.G. (2009). A representative ex-situ fretting wear investigation of orthodontic arch-wire/bracket contacts. Wear. 266, 850-858.