Parameter's optimization of surface plastic deformation corrosion-resistant steel by computer simulation

• Autorzy: Lasitsa A. M. , Churankin V. G. , Derkach V. V.
• Języki publikacji: EN

Abstrakty

EN

The knurling of corrosion-resistant steel 95X18 (the nearest analog is AISI 440B, AISI 440C, AISI A756, DIN-1.4125, SUS440C, Z100CD17) simulation with finite element method is investigated in the paper. Diagram stresses, strains and displacement are calculated by using CAE system SolidWorks. Dependence of strengthening area on processing tools geometry and loaded force are investigated. We proposed the algorithm of knurling parameters optimization by using a computer simulation. The correlation between simulation and experimental data was found.

Słowa kluczowe

EN

corrosion-resistant steel; martensitic steel; finite element method; computer simulation; surface plastic deformation

PL

stal odporna na korozję; stal martenzytyczna; metoda elementów skończonych; symulacje komputerowe; plastyczne odkształcenie powierzchniowe

• Wydawca: Wydawnictwo Politechniki Łódzkiej
• Czasopismo: Mechanics and Mechanical Engineering
• Rocznik: 2018
• Tom: Vol. 22, nr 4
• Strony: 991--997
• Opis fizyczny: Bibliogr. 7 poz., il. kolor., 1 fot., wykr.

Twórcy

autor

Lasitsa A. M.

• Omsk State Technical University, Omsk, Russia

autor

Churankin V. G.

• Omsk State Technical University, Omsk, Russia

autor

Derkach V. V.

• Omsk State Technical University, Omsk, Russia

Bibliografia

• [1] Lasitsa, A.M., Churankin, V.G., Morgunov, A.P.: Complex method of improving the physical and mechanical properties of the surface layer of structural steels, Technology of machine building, 5, 42-44, 2012 (in Russian).
• [2] Spaggiari, A., Dragoni, E.: Effect of Mechanical Surface Treatment on the Static Strength of Adhesive Lap Joints, The Journal of Adhesion, 89(9), 677-696, 2012. DOI: 10.1080/00218464.2012.751526.
• [3] Prasad, A.V.S.R.K., Rao, P.N., Rao, U.R.K.: Optimal selection of process parameters for turning operations in a CAPP system, International Journal of Production Research, 35(6), 1495-1522, 1997. DOI: 10.1080/002075497195083.
• [4] Zhang, P., Kou, S., Lin, B., Wang, Y.: Optimization for radial knurling connection process of assembled camshaft using response surface method, Int. J. Adv. Manuf. Technol., 77, 653-661, 2015. DOI: 10.1007/s00170-014-6486-z.
• [5] Li, A., Pang, J., Zhao, J., Zang, J., Wang, F.: FEM-simulation of machining induced surface plastic deformation and microstructural texture evolution of Ti-6Al-4V alloy, International Journal of Mechanical Sciences, 2017. DOI:10.1016/j.ijmecsci.2017.02.014.
• [6] Feng, C.J., Wang, X.: Data mining techniques applied to predictive modeling of the knurling process, IIE Transactions, 36, 253-263, 2004. DOI: 10.1080/07408170490274214.
• [7] Lasitsa, A.M., Churankin, V.G.: Dynamics of wear surface layers modified by complex treatment, Dynamics of Systems, Mechanisms and Machines, 1-4, 2014. DOI: 10.1109/Dynamics.2014.7005674.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).