Influence of polyethylene glycol concentration on morphology of polypropylene membranes

• Autorzy: Lenart P. , Kotra-Konicka K. , Kalbarczyk J.
• Języki publikacji: EN

Abstrakty

EN

This work studied the influence of polyethylene glycol (PEG) concentration on the polypropylene membranes morphology. Polypropylene membranes were modified with argon plasma and then immersed in PEG solution with various concentration between 50-80%. Changes of membranes morphology were observed by scanning electron microscope, Fourier transform infrared spectroscopy and contact angle measurements.

Słowa kluczowe

EN

membrane modification; polyethylene glycol; polypropylene membrane

PL

modyfikacja membrany; glikol polietylenowy; błona polipropylenowa

• Wydawca: Foundation for Young Scientists
• Czasopismo: Challenges of Modern Technology
• Rocznik: 2014
• Tom: Vol. 5, no. 2
• Strony: 9--14
• Opis fizyczny: Bibliogr. 11 poz., rys., wykr.

Twórcy

autor

Lenart P.

• Department of Chemical and Process Engineering, Warsaw University of Technology

autor

Kotra-Konicka K.

• Department of Chemical and Process Engineering, Warsaw University of Technology

autor

Kalbarczyk J.

• Institute of Electronic Materials Technology, Department of Optoelectronics

Bibliografia

• [1] Banerjee, I., Pangule, R. and Kane, R. (2011). Antifouling Coatings: Recent Developments in the Design of Surfaces That Prevent Fouling by Proteins. Bacteria, and Marine Organisms Adv. Mater. (23) , pp. 690-718.
• [2] Becker A.L., H. K. (2012). Proteins and polyelectrolytes:A charged relationship. Current Opinion in Colloid & Interface Science 17 , pp. 90-96.
• [3] Ceynowa, J. (2009). Membrany selektywne i procesy membranowe. Membrany teoria i praktyka I, 7-29.
• [4] Dobrynin, A. and Rubinstein, M. (2005). Theory of polyelectrolytes in solutions and at surfaces. Prog. Polym. Sci. 30 , pp. 1049–1118.
• [5] Greene, G., Radhakrishnab, H. i Tannenbaum, R. (2005). Protein binding properties of surface-modified porous polyethylene membranes. Biomaterials 26, pp. 5972–5982.
• [6] Kochan J., Wingents, T., Wong, J.E., and Melin, T. (2010). Properties of polyethersulfone ultrafiltration membranes modified by polyelectrolytes. Desalination 250, pp. 1008-1010.
• [7] Bryjak, M., Janecki, T.,Gancerz, I. and Smolińska, K. (2009). Plazmowa modyfikacja membran polimerowych. Membrany teoria i praktyka , III, pp. 64-79.
• [8] Ulbricht, M. (2006). Advanced functional polimer membranes. Polymer 47, pp. 217-262.
• [9] Narębska, P. (2009) Membrany i membranowe techniki rozdziału. Toruń: UMK Toruń.
• [10] Steen, M., Jordan, A. i Fisher, E. (2002). Hydrophilic modification of polymeric membranes by low temperature H2O plasma treatment. Journal of Membrane Science 204 , pp. 341– 357.
• [11] Kotra, K., Piątkiewicz W. (2013), Oxygen plasma modification of polyethersulfone membranes, [in:] Proceedings, PERMEA conference materials, pp. 156-163. 14