Using of Lean Manufacturing Method in Planned Body Production Line

• Autorzy: Jaworski J. , Kluz R.
• Języki publikacji: EN

Abstrakty

EN

Organization of the tooling service mainly depends on the profile of the production plant. In large enterprises the important problem are both the organization of the tooling service and tool flow. For realized manufacturing process besides the flow tools process the correct selection of the cutting parameters is also important. In mechanical working operations, an important issue is to select the tools that will limit the size of the designated production pace and provide for them the required tool life. The aim of this study is to analyze the wear of cutting tools on the production line of bodies at the metallurgical plant. Cutting tools used for this line are mainly drills, milling cutters and multi-blade inserts for face milling cutters and end mills. The paper presents the analysis of tool wear on the machining line of brackets. It has been shown that the cost of tool wear is about 4.2% of production costs of parts. It corresponds to the costs reported in the literature. The proper selection of the machining parameters makes it possible to reduce these costs.

Słowa kluczowe

EN

production pace; tool life; tooling service; Lean Manufacturing

PL

produkcja; oprzyrządowanie; zużycie narzędzi; analiza zużycia

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2015
• Tom: Vol. 15, iss. 1 spec.
• Strony: 47--50
• Opis fizyczny: Bibliogr. 8 poz., fot., rys., tab., wykr.

Twórcy

autor

Jaworski J.

• Department of Manufacturing and Production Engineering, Rzeszow University of Technology Al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland

autor

Kluz R.

• Department of Manufacturing and Production Engineering, Rzeszow University of Technology Al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland

Bibliografia

• [1] Womack, J. & Jones, D.T. (1994). From Lean production to the Lean enterprises. Harvard Business Rev. 72, 93-104.
• [2] Cigil, S., Nidhin, B.A.V., Rajneesh, P., Sinosh, N.K., Sreeraj, E. & Jibi, R. (2014). Improving production performance through Lean Manufacturing techniques in a manufacturing firm. Int. J. Emerg. Technol. Adv. Eng. 4(2), 626-630.
• [3] Wilson, L. (2010). How to implement Lean Manufacturing. New York - Chicago: The McGraw-Hill Companies, Inc.
• [4] Władysiak, R. (2006). Reengineering of precision castings production system. Arch. Foundry Eng. 6(19), 413-424.
• [5] Sokovic, M., Pavletic, D., Fakin, S. (2005). Application of Six Sigma methodology for process design. J. Mater. Process. Technol. 162-163, 777-783. DOI: 10.1016/j.jmatprotec.2005.02.231.
• [6] Jaworski, J. (2007). Managament quality of tools in the planned housing casting. Arch. Foundry Eng. 7, 157-160.
• [7] Jaworski, J. (2005). Possibilities of using tools with low-alloy high-speed steel casting line in the draft bodies. Arch. Foundry Eng. 5(17), 115-121. (in Polish).
• [8] Streubel A., Subbotko R. (2006). Distribution methods tools manufacturing plants based on a system Guhring TM Software Company, Production Engineering. Wiedza-Wizja- Programy Ramowe. Wrocław: Oficyna Wydawnicza Politechniki Wrocławskiej. (in Polish).