Experimental investigations of surface wear by dry sliding and induced damage of medium carbon steel

• Autorzy: Elhadi Abdelmalek , Amroune Salah , Zaoui Moussa , Mohamad Barhm , Bouchoucha Ali

Identyfikatory

DOI

10.29354/diag/134116

• Języki publikacji: EN

Abstrakty

EN

This study concerns the wear behaviour of metal couples used in industry, particularly in mechanical sliding systems (numerically controlled machine tools). In general, the nature of the materials of the parts of these systems which are in contact and move relatively, are medium carbon steels, thanks to their good mechanical and tribological properties. The present work aims to study, the dry sliding wear of the contact surface of the pin (machine slide) against the contact surface of a disc (machine groove) and the damage induced on the worn track. The pin is AISI 1038 and AISI 1045 steel, the disc is AISI 1055 steel. The tribological tests were carried out on a pin-disc tribometer, in an atmospheric environment. The wear of the pins being evaluated by weighing and studied according to the hardness of the pin with the variation of the normal load applied. The discussion of the results is based on SEM observations and EDS analyzes of worn surfaces and interfacial phenomena produced by dynamic contact. The results obtained indicated the influence of the applied load and the hardness on the wear of the pin and therefore on the tribological behaviour of the worn surfaces.

Słowa kluczowe

EN

hardness; friction; microstructure of steel; heat treatment; wear

PL

twardość; tarcie; mikrostruktura stali; obróbka cieplna; zużycie

• Wydawca: Polskie Towarzystwo Diagnostyki Technicznej
• Czasopismo: Diagnostyka
• Rocznik: 2021
• Tom: Vol. 22, No. 2
• Strony: 3--10
• Opis fizyczny: Bibliogr. 25 poz., rys., tab.

Twórcy

autor

Elhadi Abdelmalek

• University of Mohamed Boudiaf, Msila; B.P 166 ICHBELIA. Msila 28000 Algeria
• Laboratoire de Matériaux et Mécanique des Structures (LMMS), Université de M’sila. Algérie

autor

Amroune Salah

• University of Mohamed Boudiaf, Msila; B.P 166 ICHBELIA. Msila 28000 Algeria
• Laboratoire de Matériaux et Mécanique des Structures (LMMS), Université de M’sila. Algérie

autor

Zaoui Moussa

• University of Mohamed Boudiaf, Msila; B.P 166 ICHBELIA. Msila 28000 Algeria
• Laboratoire de Matériaux et Mécanique des Structures (LMMS), Université de M’sila. Algérie

autor

Mohamad Barhm

• Faculty of Mechanical Engineering and Informatics-University of Miskolc, 3515 Miskolc-Hungary

autor

Bouchoucha Ali

• Tribology laboratory, Department of Mechanical Engineering, Faculty of Science and Technology, Mentouri Brothers University, Constantine1, Algeria

Bibliografia

• 1. Madakson PB. The friction behaviour of materials. Wear. 1983; 87:191-206. https://doi.org/10.1016/0043-1648(83)90034-0.
• 2. Godet M. The third-body approach. Wear. 1984; 100:437-452. https://doi.org/10.1016/0043- 648(84)90025-5.
• 3. Jean-Marie George. Friction, wear and lubrication, Eyrolles. 2000.
• 4. Šťastniak P, Smetanka L, Drozdziel P. computer aided simulation analysis for wear investigation of railway wheel running surface, Diagnostyka. 2019; 20;3: 63-68. https://doi.org/10.29354/diag/111569.
• 5. Bressana JD, Darosa DP, Sokolowskib A, Mesquitac RA, Barbosad CA. Influence of hardness on the wear resistance of 17-4 PH stainless steel evaluated by the pin-on-disc testing, Journal of materials processing technology. 2008;205:353-359. https://doi.org/10.1016/j.jmatprotec.2007.11.251.
• 6. Tang L, Gao C, Huang J, Huang J, Zhang H, Chang W. Dry sliding friction and wear behaviour of hardened AISI D2 tool steel with different hardness levels. Tribology International. 2013; 66:165-173. https://doi.org/10.1016/j.triboint.2013.05.006.
• 7. Coronado JJ, Rodríguez SA, Sinatora A. Effect of particle hardness on mild-severe wear transition of hard second phase materials. Wear. 2013; 301:82-88. https://doi.org/10.1016/j.wear.2012.12.016.
• 8. Abouei V, Saghafian H, Kheirandish S. Effect of microstructure on the oxidative wear behavior of plain carbon steel. Wear. 2007; 262. 9-10, 1225-1231. https://doi.org/10.1016/j.wear.2006.11.009.
• 9. Ilaiyavel S, Venkatesan A. The Wear behaviour of Manganese Phosphate Coatings applied to AISI D2Steel Subject to Different Heat Treatment Processes. Procedia engineering. 2012; 38: 1916-1924. https://doi.org/10.1016/j.proeng.2012.06.234.
• 10. Katsuki F, Watari K, Tahira H, Umino M. Abrasive wear behavior of a pearlitic (0.4%C) steelmicroalloyed with vanadium. Wear. 2008; 264(3-4):331-336. https://doi.org/10.1016/j.wear.2007.03.023.
• 11. Máscia R, Ramos Neto FF, Barbosa Neto TF, Franco SD. Effects of pressure and counterbody hardness in the abrasive wear behavior of tool steels. Wear. 2031; 303(1-2):412-418. https://doi.org/10.1016/j.wear.2013.03.037.
• 12. Ojala N, Valtonen K, Heino V, Kallio M, Aaltonen J, Siitonen P, Kuokkala VT. Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels. Wear. 2014;317:(1-2):225-232. https://doi.org/10.1016/j.wear.2014.06.003.
• 13. Sondur DG, Kabadi VR, Mallapur DG. Influence of martensite phase on the tribological properties of plain carbon steel. Procedia Materials Science. 2014; 5: 464-471. https://doi.org/10.1016/j.mspro.2014.07.289.
• 14. Modi AP. Effects of microstructure and experimental parameters on high stress abrasive wear behaviour of a 0.19wt% C dual phase steel. Tribology International. 2007;40:490-497. https://doi.org/10.1016/j.triboint.2006.04.013.
• 15. Singh K, Khatirkar RK, Sapate SG. Microstructure evolution and abrasive wear behavior of D2 steel. Wear. 2015;206-216. https://doi.org/10.1016/j.wear.2015.02.019.
• 16. Hyzak JM, Bernstein IM. The role of microstructure on the strength and toughness of fully pearlitic steels. Metallurgical Transactions. 1976; 7A:1217-1224. https://doi.org/10.1007/BF02656606.
• 17. Marder AR, Bramfitt BL. .The effect of morphology on the strength of pearlite. Metallurgical Transactions A. 1976;7A:365-372. https://doi.org/10.1007/BF02642832.
• 18. Dollar M, Berveiller M, Thompson AW. Influence of deformation substructure on flow and fracture of fully pearltic steel. 1988; Acta Materialia.36:311-320. https://doi.org/10.1016/0001-6160(88)90008-9.
• 19. Elwazri AM, Wanjara P, Yuea S. The effect of microstructural characteristics of pearlite on the mechanical properties of hypereutectoid steel. Materials Science and Engineering. 2005;404:91-98. https://doi.org/10.1016/j.msea.2005.05.051.
• 20. Modia OP, Deshmukhb N, Mondala DP, Jha AK. Yegneswarana AH, Khairac HK. Effect of interlamellar spacing on the mechanical properties of 0.65% C steel. Materials characterization. 2001; 46:347-352. https://doi.org/10.1016/S1044-5803(00)00113-3.
• 21. Lei C, Gotoh M, Horimoto Y, Hirose Y. Effect of Microstructure of Cementite on Interphase Stress State in Carbon Steel. Journal of iron and steel research international. 2007;14:31-38. https://doi.org/10.1016/S1006-706X(07)60054-5.
• 22. Trevisiol C, Jourani A, Bouvier S. Effect of hardness, microstructure, normal load and abrasive size on friction and on wear behaviour of 35NCD16 steel. Wear. 2017;388-389:101-111. https://doi.org/10.1016/j.wear.2017.05.008.
• 23. Barrau O. Study of friction and wear of tool steels hot work, doctoral thesis. National Polytechnic Institute of Toulouse, France, 2004.
• 24. Ezugwu EO, Okeke CI, Machado AR. High speed threading of inclusion-modified steels with coated carbide tools. Journal of Materials Processing Technology. 1998;86(1-3):216-225. https://doi.org/10.1016/S0924-0136(98)00313-6.
• 25. Bouchoucha A, Chekroud S, Paulmier D. The influence of oxygen on the friction and wear behaviour of a copper-steel couple under electric current. Tribotest. 2004;11(1):11-27. https://doi.org/10.1002/tt.3020110103.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).