Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
On the paper the influence of modifying micro additives on the refinement of primary silicon crystals in the hypereutectic AlSi21CuNi piston silumin have been examined. As the modifiers there were used micro additives of Phosphorus in the form of AlCu19P1.4 and CuP12 pre-alloys, sulfur in the form of CuS and iron in the powdered form. The modifying micro additives were used separately and together. Micro additions of iron were used together with phosphorus. Sulfur micro addition provided the fragmentation of the primary silicon crystals, but not as effective as the phosphorus micro additive. The best effect of fragmentation of the primary silicon crystals was ensured by the combined addition of phosphorus in the form of AlCu19P1,4 pre alloy with a micro additive of powdered iron which reduced the average size of the primary silicon crystals from 114 μm to 20 μm.
Czasopismo
Rocznik
Tom
Strony
30--36
Opis fizyczny
Bibliogr. 12 poz. rys., tab.
Twórcy
autor
- University of Zielona Góra, Licealna 9 65-417 Zielona Góra, Poland
autor
- University of Zielona Góra, Licealna 9 65-417 Zielona Góra, Poland
Bibliografia
- 1. Eigenfeld, K., 2000. Metallurgical influence of hypereutectic aluminum-silicon alloys for monolithic cylinder of internal combustion engines, Z. f. Metallkunde, Nr 10, (t 91).
- 2. Hurtalová, L., Tillova, E., Chalupowá, M., 2014. The study of iron interme-tallic phases morphology with applying deep etching in secondary Al-Si alloys, METALLOGRAPHY XV, Materials Science Forum, Vol. 782, 359-364, DOI: 10.4028 /www.scientific.net/MSF.782.359
- 3. Hurtalová, L., Tillova, E., Chalupowá, M., 2015. Possibilities of Fe-rich phases elimination with using heat treatment in secondary Al-Si-Cu cast alloy, Metalurgija, Vol. 54, 39-42.
- 4. Kucharikova, L., Tillova, E., Chalupowá, M., 2015. The Si particles morphology in hhypoeutectic Al-Si casts, Materials Today Proceedings, Vol. 3, 1031-1036, DOI: 10.1016/j.matpr.2016.03.042
- 5. Michalski, M., Romankiewicz, F., 2017. AlSi21CuNI silumin modification with phosphor and strontium micro additions, Energy, Environment and Material Systems - EEMS: international conference. Polanica-Zdrój, Polska, 2017 .- Les Ulis: EDP Sciences,E3S Web of Conferences, Vol. 19, 1-6, DOI: 10.1051/e3sconf/20171903026
- 6. Müller, K., 1996. Möglichkeiten der Gefügebeeinflussung eutektischer und naheutektischer Aluminium-Silizium-Gusslefierungen unterBerücksichtigung der mechanischen Eigenschaften, Fortschritt-Berichte, VDI-Verlag GmbH, Nr 424.
- 7. Müller, K., 2000. AlFeP-eine Alternative zu AlCuP bei der Feinung des primären Siliziums in übereutektischen Aluminium-Silizium-Gusslefierungen, Proceedings of Polisch-German Symposium on „Science Research Education“, Part 1.
- 8. Poniewierski, Z., 1966. Modyfikacja siluminów, WNT, Warszawa.
- 9. Poniewierski, Z., 1989. Krystalizacja, struktura I właściwości siluminów, WNT, Warszawa.
- 10. Tenekedjiev, N., Argo, D., Gruzelski, J.E., 1990. Effect of sodium, strontium and phosphorus in hypereutectic Al-Si alloys, Giesserei-Praxis, Nr 15/16.
- 11. Tillová, E., Chalupová, M., Borko, K., Kuchariková, L., 2016, Changes of fracture surface in recycled A356 cast alloy, Materials Today Proceedings Vol. 3, 1183-1188, DOI: 10.1016/j.matpr.2016.03.009
- 12. Tillová, E., Závodská, D., Kuchariková, L., Chalupová, M., Belan, J., 2017, Study of Bending Fatigue Properties of Al-Si Cast Alloy, Archives of Metallurgy and Materials, Vol. 62, 1591–1596, DOI: https://doi.org/10.1515/amm-2017-0243
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-170f3b01-4547-4072-8f31-748bd18a2611
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.