PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Rejestracja doliny rzeki Widawy z wykorzystaniem lotniczego skanowania laserowego

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Registration of the Widawa river valley using airborne laser scanning
Języki publikacji
PL
Abstrakty
PL
W ramach projektu badawczego wykonano skaning laserowy doliny rzeki Widawy, w okolicy Wrocławia. Wykorzystano w tym celu prototypowy skaner ScaLARS (CW scanner), skonstruowany w Instytucie Nawigacji Uniwersytetu Stuttgarcie, a do rejestracji sygnału GPS i INS wykorzystano system Applanix POS/AV 510. Skaning wykonano dla 20 kilometrowego ujściowego odcinka rzeki Widawy w pasie o szerokości 2 km. Zarejestrowano około 150 milionów punktów ze średnią rozdzielczością około 3 pkt/m2 i dokładnością wysokościową na poziomie 0.2 m. Skaning laserowy doliny Widawy wykonany został dla pozyskania danych dla potrzeb modelowania hydrodynamicznego. W pracy podano podstawowe informacje dotyczące systemu ScaLARS, oraz doświadczenia związane z realizacją projektu. Omówiono produkty pochodne skaningu oraz ich przydatność w procesie modelowania hydrodynamicznego.
EN
Airborne Laser Scanning (ALS) is a modern technology, which within last years has revolutionized the process of collecting data on terrain topography, especially in afforested terrains and wooded areas. The laser scanning system integrates three measuring techniques: GPS, INS and laser scanning. The airborne laser scanning of the Widawa river valley near Wrocław was performed in the research project. A prototype scanner - ScaLARS, constructed at Institute of Navigation, University of Stuttgart, was used. The Applanix POS/AV 510 system (Position and Orientation System for Airborne Vehicles) was used for GPS and INS signals registration. The ScaLARS, as opposed to commercial systems, uses the Continuous Wave (CW scanner). The project involved scanning 20 kilometres of the Widawa river estuary with a width range of about 2 km. The calibration of system was executed in support of control areas measured by GPS techniques. The mean error of calibration in reference to control areas carried out 0.3 m along the flight direction and across the flight direction, as well as 0.1 m in the vertical direction About 150 million points were registered with an average resolution of about 3pts / m2. The vertical accuracy of laser scanning was estimated at the level of 0.2 m based upon a large-scale map (1:500) using infrastructure elements. The laser scanning of the Widawa river valley was executed in order to collect data for hydrodynamic modelling. Traditionally, the laser scanning data is used for generation of Digital Terrain Models (DTM) and Digital Surface Models (DSM). The spatial distribution of laser points on forest terrain is also useful information for hydrodynamic modelling. The ScaLARS system also records the intensity of the reflection of the laser ray as well as the quality parameters of the registered returned signal. Moreover, this information can be helpful in classifying land cover that is necessary in hydrodynamic modelling. In this paper, the basic data on the ScaLARS system and the research carried out while implementing the project were presented. Additional products of laser scanning, as well as their usefulness in hydrodynamic modelling were also shown.
Rocznik
Tom
Strony
53--62
Opis fizyczny
Bibliogr. 7 poz.
Twórcy
autor
  • Instytut Geodezji i Geoinformatyki, Uniwersytet Przyrodniczy we Wrocławiu, tel. +71 3205609
autor
  • Instytut Geodezji i Geoinformatyki, Uniwersytet Przyrodniczy we Wrocławiu, tel. +71 3205693
autor
  • Institut für Navigation, Universität Stuttgart
Bibliografia
  • 1. Borkowski A., 2004. Modellierung von Oberflächen mit Diskontinuitäten. Deutsche Geodätische Kommission, Reihe C, Heft Nr 575, München.
  • 2. Borkowski A., Gołuch P., Wehr A., Schiele O., Thomas M. 2006. Airborne laser scanning for the purpose of hydrodynamic modelling of Widawa river valley. Raports on Geodesy (w druku).
  • 3. Schiele O., 2005. Ein operationelles Kalibrierverfahren für das flugzeuggetragene Laserscannersystem ScaLARS. Deutsche Geodätische Kommission, Reihe C, Nr 592.
  • 4. Schiele O., Wehr A., Kleusberg A., 2005. Operational Calibration of Airborne Laserscanners by Using LASCAL. Proc. Optical 3-D Measurement Techniques, Vol. 1, Vienna Oct. 3-5, s. 81-89.
  • 5. Thiel K.-H., Wehr A., 2001. Operational Production of DTMs Using ScaLARS. Proc. of OEEPE workshop on Airborne Laserscanning and Interferometric SAR for Detailed Digital Elevation Models, 1-3 March, Stockholm.
  • 6. Tymków P., Borkowski A., 2006. Wykorzystanie danych lotniczego skaningu laserowego do nadzorowanej klasyfikacji pokrycia terenu dla potrzeb modelowania hydrodynamicznego. Archiwum Fotogrametrii, Kartografii i Teledetekcji, Vol. 16 (w druku).
  • 7. Wehr A., Lohr U., 1999. Airborne laser scanning - an introduction and overview. ISPRS Journal of Photogrammetry & Remote Sensing 54, s. 68-82.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-170dc2c8-007f-4a3f-a444-086e788b03a1
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.