Effect of carbon content in stainless steels on quantity of grinding energy

• Autorzy: Wójcik R.

Identyfikatory

DOI

10.2478/adms-2014-0012

• Języki publikacji: EN

Abstrakty

EN

The paper presents a study of the process of grinding stainless steels with different carbon contents. Verified the size and scope of the energy which is introduced in the surface layers for different types of abrasive grains and binders. The influence of parameters in plunge grinding process was considered in studies. The energy ratio was used for this purpose, which was calculated by multiplying energy and time of grinding wheel contact with the workpiece. To investigate influence of different carbon content on the level of energy density generated during grinding process special parameter Bp have been evaluated. The grinding tests were conducted in dry grinding technique.

Słowa kluczowe

EN

grinding; stainless steel

• Wydawca: Politechnika Gdańska
• Czasopismo: Advances in Materials Science
• Rocznik: 2014
• Tom: Vol. 14, nr 3(41)
• Strony: 45--52
• Opis fizyczny: Bibliogr. 14 poz., rys., tab., wykr.

Twórcy

autor

Wójcik R.

• Lodz University of Technology, Institute of Machine Tools and Production Engineering, Stefanowskiego 1/15, 90-924 Łódź

Bibliografia

• 1. Dudek A., Wrońska A: Corrosion of steel type SNOK and ways to prevent it [in Polish], Stal. Metale & Nowe Technologie. Vol. 1-2 (2014), 88-91.
• 2. Cobb H. M.: The History of Stainless Steel, ASM International, 2010.
• 3. Nowacki J.: Duplex steel and its weldability [in Polish]. Przegląd Spawalnictwa, 10 (2008), 34-44.
• 4. Baszkiewicz J., Kamiński M.: Basics of corrosion of materials [in Polish]. Oficyna wydawnicza Politechniki Warszawskiej, Warszawa 2007.
• 5. Krakowiak S.: Pitting corrosion of alloy steels. Corrosion processes [in Polish]. Gdańsk 2007.
• 6. Korzeniewski H.: Background to the study effect of temperature on the corrosion resistance grinding stainless steel pipe water purification [in Polish]. XXVII Naukowa Szkoła Obróbki Ściernej, Koszalin 2004.
• 7. Partington E.: Application of corrosion-resistant steel in the food industry, Euroinox, 7, 2002
• 8. Metalworking World.: Magazine Business and Technology Corporation, Sandvik Coromant.
• 9. Burakowski T., Wierzchoń T.: Surface engineering of metals [in Polish]. WNT Warszawa 1995.
• 10. Marciniak J.: Biomaterials for bone surgery [in Polish]. Wydawnictwo Politechniki Śląskiej 1992.
• 11. Wójcik R.: New media and ways to bring the grinding zone [in Polish]. Archiwum Technologii Maszyn i Automatyzacji, 28, 4 (2008), 137-145.
• 12. http//www.atlassteels.co.nz.: The Atlas Steel Technical Handbook of Stainless, Atlas Steel Technical Department, 2010.
• 13. Kruszyński B., Wójcik R.: Residual Stress in Grinding, Journal of Materials Processing Technology 109 (2001), 254-257.
• 14. www.hazmetal.com/f/kutu/1236776229.