Physicochemical Properties of Oxide ZrO2 Layer Deposited by Sol-Gel Method on Ti-6Al-7Nb Alloy

• Autorzy: Woźniak A. , Ziębowicz B. , Ziębowicz A. , Walke W.

Identyfikatory

DOI

10.24425/123793

• Języki publikacji: EN

Abstrakty

EN

The paper contains the results of the initial surface treatment influence on the properties of the medical Ti-6Al-7Nb alloy with a modified zirconium oxide layer deposited on its surface by sol-gel method. In the paper, the analysis of results of potentiodynamic studies is presented as well as its resistance to pitting corrosion and electrochemical impedance spectroscopy (EIS), macroscopic observation of the surface of samples and analysis of geometrical structure with the use Atomic Force Microscope (AFM) were performed. The studies were performed on two groups of samples depending on the graduation of the sand used in sandblasted process – 50 μm and 250 μm. Based on the obtained results it can be concluded that the type of the initial surface treatment preceding the surface modification of the Ti-6Al-7Nb has a significant effect on its properties.

Słowa kluczowe

EN

titanium alloy; Sol-gel method; ZrO2 layer; Corrosion test; AFM

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 3
• Strony: 1209--1215
• Opis fizyczny: Bibliogr. 20 poz., rys., tab., wykr.

Twórcy

autor

Woźniak A.

• Silesian University of Technology, Division of Biomedical Materials Engineering, Konarskiego 18a, 44-100 Gliwice

autor

Ziębowicz B.

• Silesian University of Technology, Division of Biomedical Materials Engineering, Konarskiego 18a, 44-100 Gliwice

autor

Ziębowicz A.

• Silesian University of Technology, Department of Biomaterials and Medical Devices Engineering, Roosevelta 40, 41-800 Zabrze

autor

Walke W.

• Silesian University of Technology, Department of Biomaterials and Medical Devices Engineering, Roosevelta 40, 41-800 Zabrze

Bibliografia

• [1] K. Makuch, R. Koczorowski, Dent. & Med. Probl. 47 (1), 81-88 (2010).
• [2] A. Zięty, M. Lachowicz, Aktual. Probl. Biomech. 4, 143-145 (2014).
• [3] B. Ziębowicz, A. Ziębowicz, B. Bączkowski, Solid State Phenom. 227, 447-450 (2015).
• [4] A. Ziębowicz, B. Bączkowski, Information Technologies in Biomedicine, Springer 7339, 341-350 (2012).
• [5] M. Pochrząst, J. Marcinak, M. Basiaga, W. Walke, Przegląd Elektrotechniczny 89 (12), 310-313 (2013).
• [6] J. Szewczenko, M. Basiaga, M. Kiel-Jamrozik, M. Kaczmarek, M. Grygiel, Solid State Phenom. 227, 483-486 (2015).
• [7] M. Basiaga, Z. Paszenda, W. Walke, P. Karasiński, J. Marciniak, Solid State Phenom. 227, 491-494 (2015).
• [8] K-H. Kim, N. Ramaswamy, Dent. Mater. J. 28 (1), 20-36 (2009).
• [9] M. Pyrliński, H. Mimanowska-Shaw, Implant protet. Stomatol. Kli. 8 (4), 50-52 (2007).
• [10] M. Marędzak, A. Siudzińska, Przem. Che. 93 (6), 920-923 (2014).
• [11] W. Walke, Z. Paszenda, P. Karasiński, J. Marciniak, Arch. of Mater. Sci. and Eng. 55 (2), 78-84 (2012).
• [12] W. Kajzer, A. Kajzer, M. Grygiel-Pradelok, A. Ziebowicz, B. Ziebowicz, Adv. Intell. Sust. 472, 385-398 (2016).
• [13] L. Pin, F. Ansart, J. P. Bonini, Y. Le Moult, V. Vidal, P. Lours, J. Eur. Ceram. Societ. 33 (2), 269-276 (2013).
• [14] PN - EN ISO 5832 - 11.
• [15] B. Burnat, M. Walkowiak-Przybyło, T. Błaszczyk, L. Klimek, Acta Bioeng. Biomech. 15 (1), 87-95 (2013).
• [16] Z. Paszenda, W. Walke, S. Jadacka, J. Achiev. Mater. Manuf. 38 (1), 24-32 (2010).
• [17] A. Kazek-Kęsik, K. Pietryga, M. Basiaga, A. Blacha-Grzechnik, G. Dercz, I. Kalemba-Rec, E. Pamuła, W. Simka, Surf. Coat. Technol. 328, 1-12 (2017).
• [18] M. Basiaga, W. Kajzer, W. Walke, A. Kajzer, M. Kaczmarek, Mater. Sci. Eng. 68 (1), 851-860 (2016).
• [19] W. Walke, M. Basiaga, Z. Paszenda, A. Kajzer, W. Kajzer, J. Szewczenko, T. Pustelny, S. Drewniak, Z. Opilski, C. Krawczyk, Surf. Coat. Technol. 307, 753-760 (2016).
• [20] J. Jaglarz, J. Szewczenko, K. Marszałek, M. Basiaga, M. Marszałek, R. Gaweł, Mater. Today-Proc. 2, 4046-4052 (2015).

Uwagi

EN

1. This work was supported by the Ministry of Science and Higher Education of Poland as the statutory financial grant of the Faculty of Mechanical Engineering, Silesian University of Technology.

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).