Multimetal Stahl 1018 Composite – Structure and Strength Properties

• Autorzy: Kalisz D. , Arustmian A.

Identyfikatory

DOI

10.24425/afe.2020.133351

• Języki publikacji: EN

Abstrakty

EN

The series of experiments was performed on commercial polymeric composite material MultimetalStahl 1018. Strength tests were performed to determine the yield point of the material. The composite had the highest hardness at a temperature of 20°C. Hardness and microhardness were determined in further experiments. The adhesiveness of the material to metal surfaces and impact strength were also analyzed. The scanning electron microscopy and X-ray microanalysis methods were used for analyzing the microstructure of the material. Chemical composition of selected areas was analyzed, which allowed for a preliminary identification of metallic elements content in the composite. The microstructure of composite is highly non-homogeneous and particular phases are highly elongated and angular. The analyzed phase was enriched with silicon, aluminium, magnesium, iron and vanadium other phases enriched with metallic elements, e.g. molybdenum, titanium, vanadium and also oxygen as well as traces of cadmium and chromium. The results were presented in the form of photos and illustrations. The results confirmed the applicability of the composite as a binder for fixing mechanical and foundry devices.

Słowa kluczowe

EN

composite Stahl 1018; strength properties; hardness; impact strength; yield point

PL

kompozyt Stahl 1018; właściwości wytrzymałościowe; twardość; siła uderzenia; granica plastyczności

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2020
• Tom: Vol. 20, iss. 4
• Strony: 77--82
• Opis fizyczny: Bibliogr. 14 poz., fot., rys., tab., wykr.

Twórcy

autor

Kalisz D.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland

autor

Arustmian A.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland

Bibliografia

• [1] Królikowski, W. (2020). Polymer structural composites. Wydawnictwo Naukowe PWN. (in Polish).
• [2] Rabek, J.(2017). Modern knowledge of polymers. Volume 2. Natural and synthetics. Wydawnictwo Naukowe PWN. (in Polish).
• [3] Konopka, K., Miazga A.K. (2017). Ceramics-metal composites. Oficyna Wydawnicza Politechniki Warszawskiej. (in Polish).
• [4] Śleziona, J. (1998). Fundamentals of composite technology Wydawnictwo Politechniki Śląskiej. (in Polish).
• [5] Rabek, J. (2020). Polymers and their interdisciplinary applications. Volume 2. Wydawnictwo Naukowe PWN. (in Polish).
• [6] Romankiewicz, F., Skocovsky, P., Gorockiewicz, R. (2020). Unconventional composite materials. Wydawnictwo Politechniki Zielonogórskiej. (in Polish).
• [7] Hyla, I.(1978). Selected issues from the engineering of composite materials. Wydawnictwo naukowe PWN. (in Polish).
• [8] Boczkowska, A., Kapuściński, J., Puciłkowski, K., Wojciechowski, S. (2000). Composites. Wydawnictwo Naukowe PWN. (in Polish).
• [9] Grabowska, B., Bulwan, M., Zapotoczny, S. & Grabowski, G. (2012). Biodegradation of new polymer foundry binders composition of poly(acrylic acid)/ dextrin. Polimery. 57, 529-534.
• [10] Lelito, J., Żak, P.L., Gracz, B., Szucki, M., Kalisz, D., Malinowski, P., Suchy, J.S. & Krajewski, W.K. (2015). Determination of substrate log-normal distribution In the AZ91/SiCp composite. Metalurgija. 54, 204-206.
• [11] Ischenko, A.A. (2012). Technological bases of restoration of the industrial equipment by modern polymeric materials. PSTU Mariupol.
• [12] Arustamian, A. & Kalisz, D. (2015). Experimental Determination of the Yield Strength of the Composite Material "Stahl 1018" at Elevated Temperatures, Archives of Foundry Engineering, 15(spec.4), 7-11. (in Polish).
• [13] Arustamian, A., Sołek, K. & Kalisz, D. (2016). Identification of yield point of polymer-based composite material in the conditions of increased temperatures. Archives of Metallurgy and Materials. 61(3), 1561-1566.
• [14] Sołek, K., Kalisz, D., Arustamian, A. & Ishchenko A. (2017). Analysis of strength characteristics of composite materials under vibration loads at higher temperatures. Journal of Machine Construction and Maintenance. 1, 93-97.