Powiadomienia systemowe
- Sesja wygasła!
Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Construction and demolition waste (CDW) management should focus on reducing CDW or properly recycling the materials since this waste is now a global problem. Sand brick waste, a component of a building’s structure, is one type of CDW. To be used as recycled aggregate, these wastes are invariably categorised as low grade. Due of the improved qualities provided, geopolymer research has recently become more popular. The objective of this study is to investigate the physical and mechanical properties of recycled sand brick aggregate (RSB) treated with silica fume based geopolymer coating. Additionally, the effectiveness of the treated RSB will be applied in concrete as coarse aggregate. The sample was made using a solid-to-liquid ratio of 1.0, 1.2, 1.4, 1.6, and 1.8. At 2.5 and 10 M, alkaline activator is a constant variable. Testing of specific gravity, water absorption, and aggregate impact value were analysed. The treated RSB concrete will then be evaluated against normal concrete. In terms of density, water absorption, and compressive strength, natural concrete performs better than treated RSB concrete. In comparison to natural concrete, treated RSB concrete absorbs 5.8% more water. Treated RSB concrete has a density of 1815 kg/m3, compared to natural concrete’s 2080 kg/m3. The compressive strength of concrete made using treated RSB aggregate is 18.1 MPa after 7 days, and 27.1 MPa at 28 days. The testing revealed that the treated RSB aggregate concrete met the specifications. As a result, treated RSB aggregate concrete offers an advantage over natural OPC concrete while saving the environment.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
739--745
Opis fizyczny
Bibliogr. 24 poz., fot., rys., tab.
Twórcy
autor
- Universiti Malaysia Perlis (UniMAP), Faculty of Civil Engineering & Technology, Universiti Malaysia Perlis Sungai Chuchuh 02100 Padang Besar, Perlis, Malaysia
- Universiti Malaysia, Center of Excellence Geopolymer & Green Technology (CEGeoGTech), Perlis, Malaysia
autor
- Universiti Malaysia Perlis (UniMAP), Faculty of Civil Engineering & Technology, Universiti Malaysia Perlis Sungai Chuchuh 02100 Padang Besar, Perlis, Malaysia
- Universiti Malaysia, Center of Excellence Geopolymer & Green Technology (CEGeoGTech), Perlis, Malaysia
- Universiti Malaysia Perlis (UniMAP) Faculty of Chemical Engineering & Technology, Malaysia
autor
- Universiti Sains Malaysia, Gelugor, School of Housing, Building and Planning ,11800, Penang, Malaysia
autor
- Gheorghe Asachi Technical University of Iasi, Faculty of Material Science and Engineering, 41 D. Mangeron St., 700050 Iasi, Romania
autor
- Universiti Malaysia Perlis (UniMAP), Faculty of Civil Engineering & Technology, Universiti Malaysia Perlis Sungai Chuchuh 02100 Padang Besar, Perlis, Malaysia
- Universiti Malaysia, Center of Excellence Geopolymer & Green Technology (CEGeoGTech), Perlis, Malaysia
autor
- Universiti Malaysia, Center of Excellence Geopolymer & Green Technology (CEGeoGTech), Perlis, Malaysia
- Universiti Malaysia Perlis (UniMAP), Faculty of Mechanical Engineering & Technology, Malaysia
autor
- Engineering Faculty, Universitas Negeri Malang, Semarang St. No. 5, Malang, East Java 65154, Indonesia
autor
- Universitas Brawijaya, Faculty of Engineering, Department of Civil Engineering, Indonesia
Bibliografia
- [1] S.D. Datta, M.J. Rana, M.N. Assafi, N.J. Mim, S. Ahmed, Investigation on the generation of construction wastes in Bangladesh. Inter. J. Constr. Manage. 23 (13), 2260-2269 (2022). DOI: https://doi.org/10.1080/15623599.2022.2050977
- [2] J. Bao, S. Li, P. Zhang, X. Ding, S. Xue, Y. Cui, T. Zhao, Influence of the incorporation of recycled coarse aggregate on water absorption and chloride penetration into concrete. Constr. Build. Mater. 239, 117845 (2020). DOI: https://doi.org/10.1016/j.conbuildmat.2019.117845
- [3] D.H. Vo, C.L. Hwang, K.D. Tran Thi, M.D. Yehualaw, M.C. Liao, Y.F. Chao, HPC produced with CDW as a partial replacement for fine and coarse aggregates using the densified Mixture Design Algorithm (DMDA) method: Mechanical properties and stability in development. Constr. Build. Mater. 270, 121441 (2021). DOI: https://doi.org/10.1016/j.conbuildmat.2020.121441
- [4] N. Zhang, H. Duan, T.R. Miller, V.W.Y. Tam, G. Liu, J. Zuo, Mitigation of carbon dioxide by accelerated sequestration in concrete debris. Renew. Sustain. Energy Rev. 117, 109495 (2020). DOI: https://doi.org/10.1016/j.rser.2019.109495
- [5] F.A. Shilar, S.V. Ganachari, V.B. Patil, T.M.Y Khan, S. Javed, R.U. Baig, Optimization of Alkaline Activator on the Strength Properties of Geopolymer Concrete. Poly. 14 (12), (2022). DOI: https://doi.org/10.3390/polym14122434
- [6] W.W.A. Zailani, M.M.A.B. Abdullah, M.F. Arshad, R.A. Razak, M.F.M. Tahir, R.R.M.A. Zainol, M. Nabialek, A.V. Sandu, J.J. Wysłocki, K. Błoch, Characterisation at the Bonding Zone between Fly Ash based Geopolymer Repair Materials (GRM) and Ordinary Portland Cement Concrete (OPCC). Mater. 14 (1), 56 (2021). DOI: https://doi.org/10.3390/ma14010056
- [7] M. Ibrahim, W.M.W. Ibrahim, M.M.A.B. Abdullah, M. Nabialek, R. Putra Jaya, M. Setkit, R. Ahmad, B. Jeż, Synthesis of Metakaolin Based Alkali Activated Materials as an Adsorbent at Different Na2SiO3/NaOH Ratios and Exposing Temperatures for Cu2+ Removal. Mater. 16 (3), 1221 (2023). DOI: https://doi.org/10.3390/ma16031221
- [8] S.R. Abdila, M.M.A.B. Abdullah, R. Ahmad, S.Z. Abd Rahim, M. Rychta, I. Wnuk, M. Nabiałek, K. Muskalski, M.F. Mohd Tahir, Syafwandi, M. Isardi, M. Gucwa, Evaluation on the Mechanical Properties of Ground Granulated Blast Slag (GGBS) and Ffly Ash Stabilized Soil via Geopolymer Process. Mater. 14 (11), 2833 (2021). DOI: https://doi.org/10.3390/ma14112833
- [9] B.W. Chong, R. Othman, R. Putra Jaya, M.R.M. Hasan, A.V. Sandu, M. Nabiałek, B. Jeż, P. Pietrusiewicz, D. Kwiatkowski, P. Postawa, M.M.A.B. Abdullah, Design of Experiment on Concrete Mechanical Properties Prediction: A Critical Review. Mater. 14 (8), 1866 (2021). doi: https://doi.org/10.3390/ma14081866
- [10] M.H. Yazid, M.A. Faris, M.M.A.B. Abdullah, M. Nabiałek, S.Z.A. Rahim, M.A.A.M. Salleh, M. Kheimi, A.V. Sandu, A. Rylski, B. Jeż, Contribution of Interfacial Bonding towards Geopolymers Properties in Geopolymers Reinforced Fibers: A Review. Mater. 15 (4), 1496 (2022). DOI: https://doi.org/10.3390/ma15041496
- [11] A. Anamika, P.V. Ramana, GGBS:Fly-Ash evaluation and mechanical properties within high strength concrete. Mater. Today: Proceed. 50 (5), 2404-2410 (2022). DOI: https://doi.org/10.1016/j.matpr.2021.10.257
- [12] K. Zulkifly, H. Cheng-Yong, L. Yun-Ming, R. Bayuaji, M.M.A.B. Abdullah, S. Bin Ahmad, T. Stachowiak, J. Szmidla, J. Gondro, B. Jeż, and et al., Elevated-Temperature Performance, Combustibility and Fire Propagation index of Fly Ash-Metakaolin Blend Geopolymers with Addition of Monoaluminium Phosphate (MAP) and Aluminum Dihydrogen Triphosphate (ATP), Mater. 14 (8), 1973 (2021). DOI: https://doi.org/10.3390/ma14081973
- [13] H. Upadhyay, M. Mungule, K.K.R. Iyer, Issues and challenges for development of geopolymer concrete. Mater. Today: Proceed. 65 (2), 1575-1581 (2022). DOI: https://doi.org/10.1016/j.matpr.2022.04.520
- [14] J.V.M. Raman, V. Ramasamy, Various treatment techniques involved to enhance the recycled coarse aggregate in concrete: A review. Mater. Today: Proceed. 45 (7), 6356-6363 (2021). DOI: https://doi.org/10.1016/j.matpr.2020.10.935
- [15] O.F. Ebenezer, T.K. John, J.B. Adewumi, L. Jian, A comprehensive review on the use of recycled concrete aggregate for pavement construction: Properties, performance, and sustainability. Clean. Mater. 9, 100199 (2023). DOI: https://doi.org/10.1016/j.clema.2023.100199
- [16] A.L. Almutairi, B.A. Tayeh, A. Adesina, H.F. Isleem, A.M. Zeyad, Potential applications of geopolymer concrete in construction: A review. Case Stud. Const. Mater. 15, e00733 (2021). DOI: https://doi.org/10.1016/j.cscm.2021.e00733
- [17] C.H.L. Dickson, A.R. Rafiza, Y. Zarina, A. Mohd Mustafa Al Bakri, C. Jitrin, T.P. Vu, M. Rosnita, A. Ikmal Hakem, Investigation of influence factors and surface treatment on palm oil boiler ash (POBA) based geopolymer artificial aggregate: Impregnation vs. coating method. J. Build. Eng. 66, 105936 (2023). DOI: https://doi.org/10.1016/j.jobe.2023.105936
- [18] British Standards Institution, BS 812-112 Methods for determination of aggregate impact value (AIV). 1, 14 (1990).
- [19] N. Hui Teng, H. Cheng Yong, M.M.A.B. Abdullah, N. Yong Sing, R. Bayuaji, Study of Fly Ash Geopolymer and Fly Ash/Slag Geopolymer in Term of Physical and Mechanical Properties. Europ. J. Mater. Sci. Eng. 5 (4) 187-198 (2020). DOI: https://doi.org/10.36868/ejmse.2020.05.04.187
- [20] H.S. Gokce, D. Hatungimana, K. Ramyar, Effect of fly ash and silica fume on hardened properties of foam concrete. Const. Build. Mater. 194, 1-11 (2019). DOI: https://doi.org/10.1016/j.conbuildmat.2018.11.036
- [21] P. Duan, C. Yan, W. Zhou, Compressive strength and microstructure of fly ash based geopolymer blended with silica fume under thermal cycle. Cem. Concr. Compos. 78, 108-119 (2017). DOI: https://doi.org/10.1016/j.cemconcomp.2017.01.009
- [22] A.C.A. Muller, K.L. Scrivener, J. Skibsted, A.M. Gajewicz, P.J. McDonald, Influence of silica fume on the microstructure of cement pastes: new insights from 1h NMR relaxometry. Cem. Concr. Res. 74, 116-125 (2015). DOI: https://doi.org/10.1016/j.cemconres.2015.04.005
- [23] C. Peiliang, M. Linna, Using silica fume for improvement of fly ash/slag based geopolymer activated with calcium carbide residue and gypsum. Constr. Build. Mater. 275, 122171 (2021). DOI: https://doi.org/10.1016/j.conbuildmat.2020.122171
- [24] American Concrete Institute, ACI 213R-87 Guide for Structural Lightweight Aggregate Concrete. 1-27 (2014).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-159f3a15-c3a8-4cf5-801c-da80b6da2a43
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.