Influence of Iron in AlSi10MgMn Alloy

• Autorzy: Žihalová M. , Bolibruchová D.

Identyfikatory

DOI

10.2478/afe-2014-0095

• Języki publikacji: EN

Abstrakty

EN

Presence of iron in Al-Si cast alloys is common problem mainly in secondary (recycled) aluminium alloys. Better understanding of iron influence in this kind of alloys can lead to reduction of final castings cost. Presented article deals with examination of detrimental iron effect in AlSi10MgMn cast alloy. Microstructural analysis and ultimate tensile strength testing were used to consider influence of iron to microstructure and mechanical properties of selected alloy.

Słowa kluczowe

EN

alloy AlSi10MgMn; intermetallic phase; bronze

PL

stop AlSi10MgMn; faza międzymetaliczna; brąz

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2014
• Tom: Vol. 14, iss. 4
• Strony: 109--112
• Opis fizyczny: Bibliogr. 8 poz., rys., tab.

Twórcy

autor

Žihalová M.

• Department of Technological Engineering, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovakia

autor

Bolibruchová D.

• Department of Technological Engineering, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovakia

Bibliografia

• [1] Taylor, J.A. (2004). The effect of iron in Al-Si casting alloys. In 35th Australian Foundry Institute National Conference, 2004. 148-157.
• [2] Cao, X. & Campbell, J. (2006). Morphology of Al5FeSi Phase in Al-Si Cast Alloys. Materials Transactions. 47(5), 1303-1312.
• [3] Mackay, R.I. (1996). Quantification of Iron in Al-Si Foundry Alloys via Thermal Analysis. Master thesis, McGill University, Montreal, Canada.
• [4] Taylor, J.A. (2012). Iron-containing intermetallic phases in Al-Si based casting alloys. Procedia Materials Science 1, 19-33. DOI: 10.1016/j.mspro. 2012.06.004.
• [5] Kumari, S.S.S., Pillai, R.M., Rajan, T.P.D. & Pai, B.C. (2007). Effects of individual and combined additions of Be, Mn, Ca and Sr on the solidification behaviour, structure and mechanical properties of Al–7Si–0.3Mg–0.8Fe alloy. Materials Science and Engineering A. 567-573. DOI:10.1016/j.msea.2007.01.082.
• [6] Tillová, E., Chalupová, M. (2009) Structural analysis of Al-Si cast alloys. Žilina: EDIS.
• [7] Hurtalová, L., Tillová, E. (2013). Elimination of the negative effect of Fe-rich intermetallic phases in secondary (recycled) aluminium cast alloy. Manufacturing Technology. 13(1), 44-50.
• [8] Bolibruchová, D., Žihalová, M. (2013). Possibilities of iron elimination in aluminium alloys by vanadium. Manufacturing Technology. 13(3), 289-296.