Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Shale gas in the United States over the past decade, and interest has spread to potential gas shales in Canada, Europe, Asia, and Australia. One analyst expects shale gas to supply as much as half the natural gas production in North America by 2020. Carbon dioxide capture and storage (CCS) is a set of technologies for the capture of CO2 from its anthropogenic point sources, its transport to a storage location, and its geosequestration. This is only one, though very important, option in a portfolio of actions to fight the increase of atmospheric CO2 concentration and to mitigate climate change, while at the same time allowing for the continued use of fossil fuels. Deployment of CCS technologies is expected to be limited in the next 5-10 years, but to contribute significantly to the reduction of CO2 emissions 20 years from now. Capture of CO2 using existing separation techniques can be applied to large point sources, i.e. power plants or industrial plants; CO2 can be easily transported over large distances using pipelines and ships; finally CO2 can be permanently stored in suitable deep geological formations, namely deep saline aquifers, oil or gas reservoirs, and unmineable coal seams, or it can be fixed in carbonates. The paper deals with the innovative method of carbon dioxide storage coupled with gas shale fracturing and methane recovery developed in the Military University of Technology. It allows to effectively mine the shale gas and to store carbon dioxide in shale rock. It must be noticed that CO2 pollution is a very important problem in Poland, because of European Union CO2 limits. Also carbon dioxide thermodynamic process of decompression numerical calculation, which simulates the injection of the cold liquid gas into the shale formation (high temperature and pressure conditions) and its influence on shale rock fracturing as well as initial experimental verification of the method was presented in the paper.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
161--167
Opis fizyczny
Bibliogr. 5 poz., rys., wykr.
Twórcy
autor
- Military University of Technology, Faculty of Mechanical Engineering, Department of Mechanics and Applied Computer Science, Warsaw
autor
- Military University of Technology, Faculty of Mechanical Engineering, Department of Mechanics and Applied Computer Science, Warsaw
autor
- Military University of Technology, Faculty of Mechanical Engineering, Department of Mechanics and Applied Computer Science, Warsaw
Bibliografia
- [1] Prusty B.K.: Sorption of methane and CO2 for enhanced coalbed methane recovery and carbon dioxide sequestration. Journal of Natural Gas Chemistry, vol. 17, nr 1, 2008, 29-38.
- [2] Orr F.M.: Storage of carbon dioxide in geologic formation. Journal of Petroleum Technology, vol. 56, nr 9, 2004, 90-97.
- [3] Tarkowski R.: Geologiczna sekwestracja CO2. Studia, Rozprawy, Monografie 132, Wydawnictwo Instytutu Gospodarki Surowcami Mineralnymi i Energia PAN, Krakow 2005, 1-120.
- [4] Lemmon E., Huber M., Mc Linden M.: REFPROP User's Guide Version 8.0. National Institute of Standards and Technology, Colorado 2007.
- [5] Giljarhus K., Munkejord S., Skaugen G.: Solution of the Span-Wagner equation of state using a density-energy state function for fluid-dynamic simulation of carbon dioxide. SINTEF Energy Research
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-142655a8-567e-4c0f-9b3a-aeb97c55c4ee