Review on properties of aluminium metal matrix composites

• Autorzy: Subramaniam Balasubramani , Purusothaman Vijay Rengaraj , Karuppusamy Sibi Mayuran , Ganesh Shree Hari , Markandan Raj Kumar

Identyfikatory

DOI

10.30464/jmee.2020.4.1.57

• Języki publikacji: EN

Abstrakty

EN

Nowadays, the global industries producing mechanical components are moving towards the usage of composites to reduce weight at the same time without compromising with characteristics of the material being used. This new combination of material provides specific desired properties when combined with various reinforcement materials like SiC, B4C, Al2O3, MgO etc., It is widely used in various industries like aerospace, automobile and marine industries. This property specific tailorable metal matrix composite with Al7075 as the base material can be fabricated using various techniques such as stir casting, high end ball milling, ultrasonic assisted casting, powder metallurgy, squeeze casting friction stir casting etc., out of which stir casting method is preferred by many researchers as stir casting method is seen to provide better distribution of reinforcement particles throughout the metal matrix. It is evident from the research of various authors that when the base material Al7075 is reinforced with the above-mentioned ceramic, it is found that there is a decrease in density and increase in hardness, compressive strength and wear resistance. Here, both physical and mechanical behaviour of aluminium reinforced composites with the effect of the particle size changes, effects after reinforcement and other processing and fabrication methods have been discussed.

Słowa kluczowe

EN

aluminium; metal matrix composites; reinforcement; fabrication techniques; properties of metal matrix composites

PL

aluminium; kompozyty metalowe; kompozyty o osnowie metalowej; zbrojenie; techniki wytwarzania; właściwości kompozytów

• Wydawca: Wydawnictwo Uczelniane Politechniki Koszalińskiej
• Czasopismo: Journal of Mechanical and Energy Engineering
• Rocznik: 2020
• Tom: Vol. 4, No 1
• Strony: 57--66
• Opis fizyczny: Bibliogr. 31 poz., rys., tab.

Twórcy

autor

Subramaniam Balasubramani

• Faculty of Mechanical Engineering, Department of Production Engineering, Sri Eshwar College of Engineering, Coimbatore - 641202, Tamilnadu, India

autor

Purusothaman Vijay Rengaraj

• Department of Mechanical Engineering, Sri Eshwar College of Engineering, Coimbatore-641202, India

autor

Karuppusamy Sibi Mayuran

• Department of Mechanical Engineering, Sri Eshwar College of Engineering, Coimbatore-641202, India

autor

Ganesh Shree Hari

• Department of Mechanical Engineering, Sri Eshwar College of Engineering, Coimbatore-641202, India

autor

Markandan Raj Kumar

• Department of Mechanical Engineering, Sri Eshwar College of Engineering, Coimbatore-641202, India

Bibliografia

• 1. Krishnamoorthi, K. and Balasubramanian, P., 2015. Review the Properties of Al7075 Matrix Composites. J. Mater. Sci. Mech. Eng., 2(1), pp.85-90
• 2. Sambathkumar, M., Navaneethakrishnan, P., Ponappa, K.S.K.S. and Sasikumar, K.S.K., 2017. Mechanical and corrosion behavior of Al7075 (hybrid) metal matrix composites by two steps stir casting process. Latin american journal of solids and structures, 14(2), pp. 243-255.
• 3. Pradeep Devaneyan, S., Ganesh, R. and Senthilvelan, T., 2017. On the mechanical properties of hybrid aluminium 7075 matrix composite material reinforced with SiC and TiC produced by powder metallurgy method. Indian Journal of Materials Science, 2017
• 4. Ravi B., 2017. Fabrication and mechanical properties of Al7075-SiC-TiC hybrid metal matrix composites. International Journal of Engineering Science Invention, 6, pp. 12-9
• 5. Jacob, S., Shajin, S. and Gnanavel, C., 2017, March. Thermal analysis on Al7075/Al2O3 metal matrix composites fabricated by stir casting process. In IOP Conference Series: Materials Science and Engineering (Vol. 183, No. 1, p. 012010). IOP Publishing
• 6. Subramaniam, B., Natarajan, B., Kaliyaperumal, B. and Chelladurai, S.J.S., 2018. Investigation on mechanical properties of aluminium 7075-boron carbide-coconut shell fly ash reinforced hybrid metal matrix composites. China Foundry, 15(6), pp. 449-456
• 7. Rajendra.S.K. and Ramesha.C.M., 2015. “A Survey of Al7075 Aluminium Metal Matrix Composites” International Journal of Science and Research. 4(2), pp. 10711075
• 8. Uvaraja, V.C., Natarajan, N., Sivakumar, K., Jegadheeshwaran, S. and Sudhakar, S., 2015. Tribological behavior of heat-treated Al 7075 aluminium metal matrix composites
• 9. Dasgupta, R., 2012. Aluminium alloy-based metal matrix composites: a potential material for wear resistantapplications. ISRN metallurgy, 2012
• 10. Saravanan, C., Subramanian, K., Krishnan, V.A. and Narayanan, R.S., 2015. Effect of particulate reinforced aluminium metal matrix composite - a review. Mechanics and Mechanical Engineering, 19(1), pp.23-30
• 11. Balasubramani, S. and Balaji, N., 2016. Investigations of vision inspection method for surface defects in image processing techniques - a review. Advances in Natural and Applied Sciences, 10(6 SE), pp.115-120
• 12. Raju, F.A. and Kumar, M.D., 2017. Micro Structure and Mechanical Behavior of AL7075-T6 and Fly Ash Metal Matrix Composite Produced by Stir Casting Process. International Journal of Theoretical and Applied Mechanics, 12(2), pp.365374
• 13. Shrivastava, A.K., Singh, K.K. and Dixit, A.R., 2018. Tribological properties of Al 7075 alloy and Al 7075 metal matrix composite reinforced with SiC, slidingunder dry, oil lubricated, and inert gas environments. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232(6), pp.693-698
• 14. Suryakumari, T.S.A., Ranganathan, S. and Shankar, P., 2015. Study on Mechanical Properties of Al 7075 Hybrid Metal Matrix Composites. In Applied Mechanics and Materials (Vol. 813, pp. 230-234). Trans Tech Publications Ltd
• 15. Balaji, N., Balasubramani, S., Ramakrishnan, T. andSureshbabu, Y., 2020. Experimental Investigation of Chemical and Tensile Properties of Sansevieria Cylindrica Fiber Composites. In Materials Science Forum (Vol. 979, pp. 58-62). Trans Tech Publications Ltd
• 16. Dileep, B.P., Vitala, H.R., Megalingam, A. and Karthik, K., 2018. Mechanical and tribological characterization nitrided Al-7075/Al2O3 metal matrix composites. Periodicals of Engineering and Natural Sciences, 6(2), pp. 64-70
• 17. Vinitha, B.S., 2014. Motgi, Evaluation of Mechanical Properties of Al 7075 Alloy, Flyash, SiC and Red mud Reinforced Metal Matrix composites, Inter. J. Sci. Research. Develop, 2, pp.190-193
• 18. Raghavendra, N. and Ramamurthy, V.S., 2015. Tribological Characterization of AL7075/AL203/SIC Reinforced Hybrid Particulate Metal Matrix Composite Developed by Stir Casting Process. International Journal of Recent advances in Mechanical Engineering (IJMECH), 4
• 19. Rao, P.C.S., Prasad, T. and Harish, M., 2017. Evaluation of Mechanical Properties of Al7075-ZrO2 Metal Matrix Composite by using Stir Casting
• 20. Technique. International Journal of Scientific Research Engineering & Technology, 6(4), pp. 2278-0882
• 21. Subramaniam, B., Natarajan, B., Kaliyaperumal, B. and Chelladurai, S.J.S., 2019. Wear behaviour of aluminium 7075 - boron carbide-coconut shell fly ash reinforcedhybrid metal matrix composites. Materials Research Express, 6(10), p.1065d3
• 22. Kumar, G.V., Rao, C.S.P., Selvaraj, N. and Bhagyashekar, M.S., 2010. Studies on Al6061-SiC andAl7075-Al2O3 metal matrix composites. Journal of Minerals & Materials Characterization & Engineering, 9(1), pp.43-55
• 23. Bhat, A. and Kakandikar, G., 2019. Manufacture of silicon carbide reinforced aluminium 6061 metal matrix

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).