Dynamic cloth fell movement. Part I: Critical review

• Autorzy: Azzam H. A. , Büsgen A.
• Języki publikacji: EN

Abstrakty

EN

Extensive coverage of previous work in the area of cloth fell movement, the circumstances of its beginning, and its influences are reviewed. The review also includes previous work describing factors that affect cloth fell movement. The advantages and disadvantages of the methods used hitherto are underlined and the need of a satisfactory measuring method is emphasised.

Słowa kluczowe

EN

weaving technology; cloth fell movement; warp tension

PL

technologia tkania; napięcie osnowy

• Wydawca: Lodz University of Technology, Faculty of Material Technologies and Textile Design
• Czasopismo: Autex Research Journal
• Rocznik: 2006
• Tom: Vol. 6, no. 1
• Strony: 14--22
• Opis fizyczny: Bibliogr. 19 poz.

Twórcy

autor

Azzam H. A.

• Lecturer of Textile Engineering, Textile Technology Department, Industrial Education College, Beni-Suef, Egypt

autor

Büsgen A.

• Textile Technology Department, University of Applied Science, Mönchengladbach, Germany

Bibliografia

• 1. Plate, D. E. A., and Hepworth, K., “Beat-Up Force In Weaving (Part I)”, Journal of Textile Institute, Vol. 62, No. 10, October 1970, 515-531.
• 2. Plate, D. E. A., and Hepworth, K., ”Beat-Up Force in Weaving (Part II)”, Journal of Textile Institute, Vol. 64, No. 5, May 1973, 233-249.
• 3. Zhonghuai, Z., and Mansour, H., “Theoretical Investigations of Beat-up”, Textile Research Journal, July 1989, 395-404.
• 4. Greenwood, K., and Cowhig, W. T.,” The Position of the Cloth Fell in Power Looms, Part I: Stable Weaving Conditions”, Journal of Textile Institute, Vol. 47, No. 5, May 1956, T241-254.
• 5. Greenwood, K., and Vaughan, G. N.” The Beat-up Force and Pick-spacing”, Journal Of Textile Institute, Vol. 48, No. 2 , February, 1957, T39-53.
• 6. Shaheen, A., and El-Deeb, A., “Theoretical and Experimental Studies for Thread Floating in the Fabric”, Egypt, Mansoura Engineering Journal (MEJ) Vol. 15, No. 2, December 1990, T27-T42.
• 7. Shaheen, A., and El-Deeb, A., “Warp Tension Distribution Across Warp Sheet on Air Jet Weaving Machine”, Egypt, Mansoura Engineering Journal (MEJ) Vol. 15, No. 1, June 1990, T47-T60.
• 8. Greenwood, K., and Cowhig, W. T.,” The Position of the Cloth Fell in Power Looms, Part II: Disturbed Weaving Conditions”, Journal of Textile Institute, Vol. 47, No. 5, May 1956, T255-265.
• 9. Greenwood, K., and Vaughan, G. N. “The Position of the Cloth Fell in Power Looms, Part III: Experimental”, Journal of Textile Institute, Vol. 47, No. 5, May 1956, T274-286.
• 10. Kohlhaas, O., “Gerät zur Ermittlung der Warenrandbewegung” Melliand Textilberichte, 6/1981, 457-460.
• 11. Basu, A. K., “Effect of Different Let-off Mechanisms on Fabric Formation and Dimension of Fabric in the Loom” Textile Research Journal, July 1987, 379-386.
• 12. Efremov, E. D., “The Movement of the Cloth Fell Due to Shedding”, Tech. of Textile Industry USSR 1970, No. 3,. 59-63.
• 13. Huang, Gu, “Reduction of Warp Tension Fluctuation and Beat-up Strip Width in Weaving”, Textile Research Journal, March 1984, 143-148.
• 14. Beljaew, W. N., “Über die Möglichkeit der Verminderung der Vortuchgröße”, Technologija Tekstiljnoi Promyschlennosti, 1969, H. 7, 76-78.
• 15. Nosek, S., “ The Dynamics of Fabric Forming on the Loom at High Weaving Rates”, Indian Journal of Fiber and Textile Research, Vol. 19, September 1994, 125-138.
• 16. Lang, A., “Messung der Lage des Warenrandes” Textil Praxis, 1957, 1224.
• 17. Vangheluwe, L., and Kiekens, P., “Test Method for Cloth Fell Displacement Caused by Relaxation”, Textile Research Journal, 65(9), September 1995, 540-544.
• 18. Vangheluwe, L., and Kiekens, P., “Modeling Mechanical Behavior of Fabric and Warp Yarn during Loom Stops”, Textile Research Journal, 66(10), November1996, 722-726.
• 19. Vangheluwe, L., and Kiekens, P., “Simulation of Procedures to Avoid Set Marks in Weaving Caused by Relaxation”, Textile Research Journal, 67(1), January 1997, 34-39.