Investigations on Wear Mechanisms of PVD Coatings on Carbides and Sialons

• Autorzy: Staszuk M. , Pakuła D. , Pancielejko M. , Tański T. , Dobrzański L. A.

Identyfikatory

DOI

10.1515/amm-2017-0310

• Języki publikacji: EN

Abstrakty

EN

The paper presents the results on the wear resistance of PVD coatings on cutting inserts made from sintered carbide and sialon ceramics. The exploitative properties of coatings in technological cutting trials were defined in the paper, which also examined the adhesion of coatings to the substrate, the thickness of the coating, and the microhardness. As a result, it was found that isomorphic coating with AlN-h phase of covalent interatomic bonds exhibits much better adhesion to the sialon substrate than isomorphic coating with titanium nitride TiN. These coatings assure the high wear resistance of the coated tools, and the high adhesion combined with the high microhardness and fine-grained structure assure an increase in the exploitative life of the coated tools. In the case of coatings on substrate made from sintered carbide, there was a significant influence on the properties of the tools coated with them as concerns the existence of the diffusion zone between the substrate and the coating.

Słowa kluczowe

EN

PVD coatings; Sialon Tool Ceramics; carbides

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 4
• Strony: 2095--2100
• Opis fizyczny: Bibliogr. 25 poz., rys., tab., wykr.

Twórcy

autor

Staszuk M.

• Silesian University of Technology Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Pakuła D.

• Silesian University of Technology Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Pancielejko M.

• Technical University of Koszalin, Faculty of Technology and Education, 2 Śniadeckich Str., 75-453 Koszalin, Poland

autor

Tański T.

• Silesian University of Technology Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Dobrzański L. A.

• Silesian University of Technology Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

Bibliografia

• [1] L. A. Dobrzański, Engineering Materials And Materials Designing. Fundamentals Of Materials Science And Metallurgy. Gliwice-Warsaw, WNT. (2006).
• [2] S. Ekinović, Obrada Rezanjem. Zenica, Bih. (2001).
• [3] M. Staszuk, D. Pakuła, T. Tański, Mater. Tehnol. 50 (5), 755-759 (2016).
• [4] M. Basiaga, W. Walke, M. Staszuk, W. Kajzer, A. Kajzer, K. Nowińska, Arch. Civ. Mech. Eng. 17, 32-42 (2017).
• [5] L. A. Dobrzański, D. Pakuła, Mater. Sci. Forum 513, 119-133 (2006).
• [6] L. A. Dobrzański, K. Gołombek, Journal Of Materials Processing Technology 164, 2005, 805-810.
• [7] T. Liu, C. Dong, S. Wu, K. Tang, J. Wang, J. Jia, Surf. Coat. Tech. 201, 6737-6741 (2007).
• [8] M. Bonek, A. Śliwa, J. Mikuła, Appl. Surf. Sci. 388, 174-179 (2016).
• [9] A. Śliwa, W. Kwaśny, M. Sroka, R. Dziwis, Metalurgija 56, 422-424 (2017).
• [10] M. Krupiński, B. Krupińska, K. Labisz, Z. Rdzawski, W. Borek, J. Therm. Anal. Calorim. 118/2, 1361-1367 (2014).
• [11] A. Zieliński, G. Golański, M. Sroka, Mat. Sci. Eng. A 682, 664-672 (2017).
• [12] A. Drygała, L. A. Dobrzański, M. Szindler, M. M. Szindler, M. Prokopiuk Vel Prokopowicz, E. Jonda, Int. J. Hydrogen. Energ. 41 (18), 2016, 7563-7567.
• [13] Y. Birol, B. Yuksel, Surf. Coat. Tech. 207, 461-466 (2012).
• [14] G. G. Fuentes, E. Almandoz, R. Pierrugues, R. Martínez, R.J. Rodríguez, J. Caro, M. Vilaseca, Surf. Coat. Tech. 205, 1368-1373 (2010).
• [15] M. Pancielejko, W. Precht, J. Mater. Process Tech. 157-158, 394-298 (2004).
• [16] A. Czyżniewski, W. Gulbiński, G. Radnóczi, M. Szerencsi, M. Pancielejko, Surf. Coat. Tech. 205, 4471-4479 (2011).
• [17] J. A. Thornton, Journal Of Vacuum Science And Technology A4 (6), 3059-3065 (1986).
• [18] M. Odén, J. Almer, G. Hakansson, M. Olsson, Thin Solid Films 377-378, 407-412 (2000).
• [19] E. Broszeit, C. Friedrich, G. Berg, Surf. Coat. Techn. 115, 9-16 (1999).
• [20] P. Bílek, P. Jurči, M. Hudáková, M. Pašák, M. Kusý, J. Bohovičová, Appl. Surf. Sci. 307, 13-19 (2014).
• [21] E. Torres, D. Ugues, Z. Brytan, M. Perucca, J. Phys. D. Appl. Phys. 42 (10), (2009).
• [22] G.-An. Cheng, D.-Yan. Han, C.-Lin. Liang, X.-Ling. Wu, R.-Ting. Zheng, Surf. Coat. Tech. 228, S328-S330 (2013).
• [23] H. Shang, J. Li, T. Shao, Appl. Surf. Sci. 310, 317-320 (2014).
• [24] J. Zhang, H. Yang, Q.-Long. Zhang, S. Dong, J.K. Luo, Appl. Surf. Sci. 282, 390-395 (2013).
• [25] V. Subramanian, T. Bakhishev, D. Redinger, S.K. Volkman, J. Disp. Technol. 5/12 525-530 (2009).

Uwagi

EN

This work was supported by the Ministry of Science and Higher Education of Poland as the statutory financial grant of the Faculty of Mechanical Engineering, Silesian University of Technology.

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).