About the Tool's Motion in the Polygonal Holes Drilling Applying Centrodes

• Autorzy: Zlokolica M. , Cavic M. , Kostic M.
• Języki publikacji: EN

Abstrakty

EN

The polygonal holes can be made in many different ways but using the rotating tool in drilling process is one of the easier and most efficient ways for doing it. The aim of this paper is, for the given constant angular velocity, to determinate motion, and velocity of the tool's blade used for polygonal hole production in the manufacturing process as mechatronics system. The given task will be solved using the equivalent mechanism and applying centrodes theory. Euler- Savary equations with matrix vector notation will be used for defining the velocity of tool's blade as well as geometry of polygonal contour.

Słowa kluczowe

EN

kinematics; polygonal holes; manufacturing process; cutting velocity

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2007
• Tom: Vol. 7, No. 2
• Strony: 41--50
• Opis fizyczny: Bibliogr. 4 poz., rys.

Twórcy

autor

Zlokolica M.

• University of Novi Sad, Faculty of Technical Sciences, P.O. Box 55, Trg D. Obradovica 6, 21121 Novi Sad, Serbia

autor

Cavic M.

• University of Novi Sad, Faculty of Technical Sciences, P.O. Box 55, Trg D. Obradovica 6, 21121 Novi Sad, Serbia

autor

Kostic M.

• University of Novi Sad, Faculty of Technical Sciences, P.O. Box 55, Trg D. Obradovica 6, 21121 Novi Sad, Serbia

Bibliografia

• [1] ERDMAN A. G., SANDOR G. N., Advance Mechanism Design. Analysis and Synthesis, Volume 1 & 2, Prentice Hall, Inc., New Jersey, USA, 1984.
• [2] SUH C. H., RADCLIFFE C. W., Kinematics & Mechanisms Design, John Wiley & Sons, Inc., New York, USA, 1978.
• [3] ZLOKOLICA M., Kinematics of Tools for Polygonal Drilling, Journal of Technical, Mechanical section, Belgrade, year XXIV-1975, No. 6 15-18, Yugoslavia
• [4] ZLOKOLICA M., CAVIC M., KOSTIC M., Centrodes in the process of kinematic description of the tools for the polygonal holes production. Proceeding 1st International Conference The Coating in Manufacturing Engineering, Thessaloniki, Greece, 1999, pp. 663-671.