Granulation Of Porous Materials with Phase Change Material (PCM)

• Autorzy: Bien Tomasz

Identyfikatory

DOI

10.35784/bud-arch.2780

• Języki publikacji: EN

Abstrakty

EN

The paper describes the research on the method of production of granulated phase-change materials (PCM) used in construction industry for the accumulation of thermal energy. As mineral materials for the granules preparation zeolite from fly ash Na-P1 and natural diatomite dust were used which were impregnated with paraffinic filtration waste and granulated using a combined granulation method. Obtained granules were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), nitrogen adsorption/desorption isotherm, and differential scanning calorimetry (DSC). Mechanical strength of the materials was determined in a “drop strength” test. Performed analyses revealed that mineral composition and micromorphology of the diatomite and zeolite granules were varied, with zeolite granules having higher mechanical strength.

Słowa kluczowe

EN

PCR; SEM; XRD; DSC

• Wydawca: Wydawnictwo Politechniki Lubelskiej
• Czasopismo: Budownictwo i Architektura
• Rocznik: 2021
• Tom: Vol. 20, no 3
• Strony: 135--144
• Opis fizyczny: Bibliogr. 14 poz., fig., tab.

Twórcy

autor

Bien Tomasz

• Wydział Geologii, Geofizyki i Ochrony Środowiska; Akademia Górniczo-Hutnicza; Polska

Bibliografia

• 1. Bendkowska W., Kudrys J., “Thermal insulation of apparel textiles with PCM”, in: International Symposium Avantex, Frankfurt am Main, 27-29.11.2000.
• 2. Li L. Yu H., Liu R.,. "Research on composite-phase change materials (PCMs)-bricks in the west wall of room-scale cubicle: Mid-season and summer day cases", Building and Environment, vol. 123, (2017), pp. 494–503. https://doi.org/10.1016/J.BUILDENV.2017.07.019
• 3. Shobo A.B., Mawire A., Aucamp M., "Rapid thermal cycling of three phase change materials (PCMs) for cooking applications", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 40, (2018), pp. 329–341. https://doi.org/10.1007/s40430-018-1253-y
• 4. Jeong Y.-G., Park K.-B., Lee H.-S., "An Experimental Study on the Thermal Performance of Cement Mortar with Granulated PCM", Journal of the Korea Institute of Building Construction, vol. 12, no. 5, (2012) pp. 548 - 557. https://doi.org/10.5345/JKIBC.2012.12.5.548
• 5. da Cunha J.M.P., and Eames P. "Thermal energy storage for low and medium temperature applications using phase change materials –A review", Applied Energy, vol. 177, (2016), pp. 227–238. https://doi.org/10.1016/j.apenergy.2016.05.097
• 6. Zhang Y., Zhou G., Lin K., Zhang Q., Di H., "Application of latent heat thermal energy storage in buildings: State-of the art and outlook", Building and Environment, vol. 42, (2007), pp. 2197–2209. https://doi.org/10.1016/j.buildenv.2006.07.023
• 7. Mehling H., Cabeza L.F., "Heat and cold storage with PCM. An up to date introduction into basics and applications". Berlin: Springer-Verlag, 2008. https://doi.org/10.1007/978-3-540-68557-9
• 8. Rumpf H., "The strength of granules and agglomerates", in Aggromeration, Interscience, Kneper W.A. (ed), New York: John Wiley, 1962, pp. 379-414.
• 9. Sterczyńska A., Deryło-Marczewska A., Sliwinska-Bartkowiak M. Piotrowska J.Z., Jarek M., Domin K., "Phase transitions of octamethylcyclotetrasiloxane confined inside aluminosilicate and silicate nanoporous matrices", Journal of Thermal Analysis and Calorimetry, vol. 118, no. 1, (2014), pp. 263-276. https://doi.org/10.1007/s10973-014-4008-8
• 10. Ramakrishnan S., Sanjayan J., Wang X., Alam M., Wilson J.L., "A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites", Applied Energy, vol. 157, (2015), pp. 85-94. http://dx.doi.org/10.1016/j.apenergy.2015.08.019
• 11. Sobolčiak P., Mustapha, K., Krupa I., AlMa'adeed, M., "Storage and Release of Thermal Energy of Phase Change Materials Based on Linear Low Density of Polyethylene, Parafin Wax and Expanded Graphite", in Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems, MEMA 2015, pp. 395-402. https://doi.org/10.1002/9781119090427.ch41
• 12. Wang L.L., Tianbo Z., Yang L., Hongjing D., "Method for Control of Particle Size and Morphology of Paraffin/Polystyrene-Divinylbenzene Microcapsules", China Petroleum Processing and Petrochemical Technology, vol. 18, (2016), pp. 73–82.
• 13. Mitran R.A., Berger D., Matei C., "Phase Change Materials Based On Mesoporous Silica", Current Organic Chemistry, vol. 22, no. 27, (2018), pp. 1-45. https://doi.org/10.2174/1385272822666180827125651
• 14. Kunecki P., Panek R., Wdowin M., Bień T., Franus W., "Influence of the fly ash fraction after grinding process on the hydrothermal synthesis efficiency of Na-A, Na-P1, Na-X and sodalite zeolite types", International Journal of Coal Science & Technology, vol. 8, (2021), pp. 291-311. https://doi.org/10.1007/s40789-020-00332-1

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).