PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The Strength of the Adhesive Joints of the Medium-Density Fireboards and Particle Boards with the PVC Film

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The aim of the present article was to analyse the adhesive joints of different types of the furniture boards used for the furniture production. The present article included a comparative analysis of the adhesive joints of the particle board and the medium-density fireboard (MDF) pressed with the following types of film: A 0.3 mm thick PVC film and a 0.8 mm thick acrylic film, made with use of a single-component reactive hot-melt adhesive based on the PUR 706.2 ME polyurethane. It was observed that, among others, the adhesive joints made of the particle board with a pressed 0.3 mm thick PVC film and the adhesive’s basis weight of 24 g/m2 is characterised by better strength properties than the adhesive joints of the particle board with the adhesive’s basis weight of 48 g/m2.
Twórcy
  • Lublin University of Technology, Faculty of Mechanical Engineering, ul. Nadbystrzycka 36, 20-618 Lublin, Poland
  • University of Žilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Žilina, Slovak Republic
  • Czech University of Life Science Prague, Faculty of Engineering, 165 21, Prague, Czech Republic
  • Ivan Puluj TNTU, Faculty of Engineering of Machines, Structures and Technologies, Ruska 56 Street, 46001 Teronpil, Ukraine
  • Ivan Puluj TNTU, Faculty of Engineering of Machines, Structures and Technologies, Ruska 56 Street, 46001 Teronpil, Ukraine
Bibliografia
  • 1. Adams, R.D., Comyn, J., Wake ,W.C.: Structural Adhesive Joints in Engineering Book, 2nd edition, Springer, United Kingdom 1997.
  • 2. Pizzi, A.: Advanced Wood Adhesive Technology, Marcel Dekker, New York, 1994.
  • 3. Hass, P., Kläusler, O., Schlegel, S., Niemz, P.: Effects of mechanical and chemical surface preparation on adhesively bonded wooden joints. International Journal of Adhesion and Adhesives, 2014, 51:95–102.
  • 4. Rudawska, A.: Influence of the thickness of joined elements on lap length of aluminium alloy sheet bonded joints. Advances in Science and Technology Research Journal, 2015, Vol 9, no. 27, 35–44.
  • 5. Rudawska, A.: Pressure during curing and the strength of 2024, 2017A and 1050 aluminium alloy sheet adhesive joints. Advances in Science and Technology Research Journal, 2015, Vol 9, no. 26, 96 –103.
  • 6. Conrad, M.P.C., Smith, G.D., Fernlund, G.: Fracture of wood composites and wood-adhesive joints: A comparative review. Wood and Fibre Science, 2004, 1, 26–39.
  • 7. da Silva, L.F.M., Carbas, R.J.C., Critchlow, G.W., Figueiredo, M.A.V., Brown, K.: Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints. International Journal of Adhesion and Adhesives, 2009, 29, 621–632.
  • 8. Bachtiar, E.V., Clerc, G., Brunner, A.J., Kaliske, M., Niemz, P.: Static and dynamic tensile shear test of glued lap wooden joint with four different types of adhesives, International Journal of the Biology, Chemistry, Physics, and Technology of Wood, 2017, 5, DOI: https://doi.org/10.1515/hf-2016–0154.
  • 9. Dunky, M.: Adhesives in the wood industry. In: Handbook of adhesive technology, revised and expanded, ed. A Pizzi, KL Mittal, Marcel Dekker, New York 2003.
  • 10. Selbo, M.L. Adhesive bonding of wood. Tech. Bull. 1512, 1975, Washington, DC: U.S. Department of Agriculture, Forest Service.
  • 11. Sellers, T. Jr.: Plywood and adhesive technology. Marcel Dekker, New York, 1985.
  • 12. Vick, C.B., Rowell, R.M.: Adhesive bonding of acetylated wood. International Journal of Adhesion and Adhesives, 1990, 10, 263–272.
  • 13. Serrano, E.: Adhesive Joints in Timber Engineering. Modelling and Testing of Fracture Properties. Division of Structural Mechanics, Lund University, LUND, Sweden, 2000.
  • 14. River, B.H.: Fracture of adhesive-bonded wood joints. In: Handbook of adhesive technology, revised and expanded, ed. A Pizzi, KL Mittal, Marcel Dekker, New York, 2003.
  • 15. Tankut, A.N., Tankut, N.: Evaluation the effects of edge banding type and thickness on the strength of corner joints in case-type furniture. Materials and Design, 2010, 31, 2956–2963.
  • 16. Frihart, Ch.R., Hunt, G.Ch.: Adhesives with Wood Materials Bond Formation and Performance, Chapter 10, General Technical Report FPL–GTR–190. https://www.fpl.fs.fed.us/documnts/fplgtr/fplgtr190/chapter_10.pdf (available at 20.05.2019).
  • 17. Angelski, D., Vitchev, P.: Influences of some factors on adhesion strength between PVC foil and MDF. Processing Technologies for the Forest and Biobased Products Industries Conference, DOI: 10.13140/RG.2.2.26880.12801.
  • 18. Rangava, H., Taghiyari, H.R., Ghofrani, M., Khojaste-Khosr, S.: Improving physical and mechanical properties in particleboard by recycled polyethylene and canola residues. International Journal of Environmental Science and Technology, 2016, 13, 857–864.
  • 19. Kociszewski, M.: Właściwości sprężyste płyty wiórowej i MDF jak materiałów anizotropowych o nierównomiernym rozkładzie gęstości na grubości płyty. Wydawnictwo Uniwersytetu Kazimierza Wielkiego, Bydgoszcz 2014.
  • 20. https://www.swisskrono.pl/mdm/Plyty-MDF/ Dane-techniczne (available at 20.05.2019).
  • 21. https://www.swisskrono.pl/mdm/Plyty-wiorowe/ Dane-techniczne (available at 20.05.2019).
  • 22. https://www.kleiberit.com/fileadmin/Content/Documents/PL/Info_Sheets/PUR_Uebersicht_Prospekt_PL.pdf (available at 20.05.2019).
  • 23. https://admjacht.pl/public/assets//42-E53_KCh%20 PPE%2020.pdf (available at 20.05.2019).
  • 24. http://www.farbyjachtowe.pl/images/karty_techniczne/sarzyna/kt_z1.pdf (available at 20.05.2019).
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-138c92e7-0f5d-4c22-9cc2-a4ff123bae5b
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.