Effect of Cone Size on the Bonding Strength of Bimetallic Composite Pipes Produced by Drawing Approach

• Autorzy: Zheng M. , Zhao T. , Gao H. , Teng H. , Hu J.

Identyfikatory

DOI

10.24425/118960

• Języki publikacji: EN

Abstrakty

EN

The effect of cone size on interfacial bonding strength of bimetallic composite pipe manufactured by drawing approach is studied on base of the plane strain assumption and ideal elastic-plastic model, a simple expression for the effect of cone size on the bonding strength of bimetallic composite pipes is proposed. The agreement of the predicted results with the experimental results shows the reliability.

Słowa kluczowe

EN

bi-metallic composite pipe; drawing approach; cone size; interfacial bonding strength; ideal elastoplastic

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 1
• Strony: 451--456
• Opis fizyczny: Bibliogr. 20 poz., rys., tab., wzory

Twórcy

autor

Zheng M.

• Northwest University, School of Chemical Engineering, Xi’an 710069, China

autor

Zhao T.

• Northwest University, School of Chemical Engineering, Xi’an 710069, China

autor

Gao H.

• Northwest University, School of Chemical Engineering, Xi’an 710069, China

autor

Teng H.

• Northwest University, School of Chemical Engineering, Xi’an 710069, China

autor

Hu J.

• Northwest University, School of Chemical Engineering, Xi’an 710069, China

Bibliografia

• [1] Y. Ye, L. Han, T. Sheehan, Z. Guo, Concrete-filled bimetallic tubes under axial compression: Experimental investigation. Thin – Walled Structures 108, 321-332 (2016).
• [2] G. Urschitz, H. Walter, J. Brier, Experimental investigation on bimetallic tube compositions for the use in latent heat thermal energy storage units. Energy Conversion and Management 125 (1), 368-378 (2016).
• [3] K. L. Schlemmer, F. H. Osman, Differential heating forming of solid and bimetallic hollow parts. Journal of Materials Processing Technology 162-163, 564-569 (2005).
• [4] E. I. Marukovich, A. M. Branovitsky, Young-Sang Na, Jong-Hoon Lee, Ki-Young Choi, Study on the possibility of continuous-casting of bimetallic components in condition of direct connection of metals in a liquid state. Materials & Design 27 (10), 1016-1026 (2006).
• [5] Z. Chen, K. Ikeda, T. Murakami, T. Takeda, J. Xie, Fabrication of composite pipes by multi-billet extrusion technique. Journal of Materials Processing Technology 137 (1-3), 10-16 (2003).
• [6] Ehsan Zemani, Gholam Hossien Liaghat, Explosive welding of stainless steel-carbon steel coaxial pipe, J. Mater. Sci. 47, 685-695 (2012).
• [7] D. Coetzee, D. G. Kröger, Analysis and measurement of contact and gap resistances in extruded bi-metallic finned tubes. Journal of Heat Recovery Systems 6(6), 503-513 (1986).
• [8] H. Haghighat, G. R. Asgari, A generalized spherical velocity field for bi-metallic tube extrusion through dies of any shape, International Journal of Mechanical Sciences 53, 248-253 (2011).
• [9] Marko Knezevic, Mohammad Jahedi, Yannis P. Korkolis, Irene J. Beyerlein, Material-based design of the extrusion of bimetallic tubes, Computational Materials Science 95, 63-73 (2014).
• [10] N. R. Chitkara, A. Aleem, Extrusion of axi-symmetric bi-metallic tubes from solid circular billets: application of a generalized upper bound analysis and some experiments, International Journal of Mechanical Sciences 43, 2833-2856 (2001).
• [11] Rimma Lapovok, Hoi Pang Ng, Dacian Tomus, Yuri Estrin, Bimetallic copper-aluminium tube by severe plastic deformation, Scripta Materialia 66, 1081-1084 (2012).
• [12] X. Yang, F. Sun, Z. Zhang, H. Shen, S. Guo, Optimization of drawing parameters’ for copper tubes with hollow sinking based on FEM simulation. The Chinese Journal of Nonferrous Metals 18, 2245- 2252 (2008).
• [13] L. Xue, Y. He, R. Liu, C. Dai, J. Chen, FEA on empty-sunken steel tube based on ANSYS/LSDYNA. Journal of Plasticity Engineering 12 (5), 74-77 (2005).
• [14] Knut Vedeld, Harald Osnes Olav Fyrileiv, Analytical expressions for stress distributions in lined pipes: Axial stress and contact pressure interaction, Marine Structures 26, 1-26 (2012).
• [15] H. Krips, M. Podhorsky, Hyraolic Expansion – a New Method for Anchoring of Tubes, VGB KRAFWERKSTECHINK 56 (7), 144-153 (1976).
• [16] Masashi Takemoto, Tubular Heat Exchanger strength – hydraulic expanding fitting pull-off force detained, Pressure Vessel 2, 68-75 (1984).
• [17] H. Yan, C. Yu, Drawing algorithm for residual contact pressure in heat exchangers during hydraulic expanding, Chemical Machinery 28, 211-214 (2001).
• [18] X. Wang, P. Li, R. Wang, Study on hydro-forming technology of manufacturing bimetallic CRA-lined pipe, Int. J. of Machine Tools & Manuf. 45, 373-378 (2005).
• [19] M. Zheng, H. Gao, H. Teng, J. Hu, Z. Tian, Y. Zhao, A simplified approach for the hydro-forming process of bi-metallic composite pipe, Archives of Metallurgy and Materials to be published in 62 (1), 2017.
• [20] B. Xu, X, Liu, Applied elastoplastic mechanics, Tsinghua University Press, Beijing, China, 128-233 (1995).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).