PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Implementation of ball-and-beam control system as an instance of Simulink to 32-bit microcontroller interface

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Konferencja
Computer Applications in Electrical Engineering 2013 (15-16.04.2013; Poznań, Polska)
Języki publikacji
EN
Abstrakty
EN
A ball balancing on a beam is a perfect platform for demonstration various control strategies. The task is to place ball rolling freely, in a reference position along the beam driven by a motor, rejecting disturbances. The research system consists of mechanical platform with stepper motor and two infrared ball position sensors, power supply and electronic controller based on a 32-bit microcontroller connected to Matlab/Simulink software running the main control algorithm. Designed in Simulink input and output subsystem blocks contain all functions required to provide data exchange with microprocessor controller of the mechanical system. Developed data exchange protocol and its implementation both in microcontroller software and Simulink subsystems allow to use this complete system for educational purposes: the controller designer is free to develop supervisory control layer, not going into details of system operation. The results of system operation with P, PD and LQR control laws are shown at the end of this paper.
Rocznik
Tom
Strony
31--38
Opis fizyczny
Bibliogr. 3 poz., rys.
Twórcy
  • Poznan University of Technology
Bibliografia
  • [1] B. Messnerk, D. Tilbury, Modeling the Ball and Beam Experiment, University of Michigan 1997.
  • [2] S. Ossowski, Modelowanie i symulacja układów i procesów dynamicznych, Oficyna Wydawnicza Politechniki Warszawskiej 2007.
  • [3] K. Nowopolski, Konstrukcja i badania układu laboratoryjnego: kulka na równoważni (Master Thesis), Poznań 2012.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-13677dd7-620d-4fe0-99ff-0dacf3dc74f7
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.