Synthesis of SiO2 nanopowders containing quartz and cristobalite phases from silica sands

• Autorzy: Munasir Z. , Triwikantoro T. , Zainuri M. , Darminto D.

Identyfikatory

DOI

10.1515/msp-2015-0008

• Języki publikacji: EN

Abstrakty

EN

In this study, extraction and synthesis of SiO₂ nanoparticles from silica sands have been conducted by means of two different methods, i.e. dry method (method 1) and hydrothermal process (method 2). The basic difference between the two methods is in the extraction step. The two methods were compared in terms of being more efficient, economical, and superior in obtaining SiO₂ nanoparticles. The SiO₂ nanoparticles were characterized in terms of phase purity, crystallinity, Si–O functional bonding as well as particles size and morphology. The most interesting fact in this study was the formation of both quartz and cristobalite phases within all prepared SiO₂ nanoparticles.

Słowa kluczowe

EN

silica sand; SiO2 nanoparticles; quartz phases; cristobalite phases

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2015
• Tom: Vol. 33, No. 1
• Strony: 47--55
• Opis fizyczny: Bibliogr. 31 poz., rys., tab.

Twórcy

autor

Munasir Z.

• Department of Physics, Faculty of Mathematics and Sciences, Institut Teknologi Sepuluh Nopember (ITS), Kampus ITS Sukolilo, Surabaya 60111, Indonesia

autor

Triwikantoro T.

• Department of Physics, Faculty of Mathematics and Sciences, Institut Teknologi Sepuluh Nopember (ITS), Kampus ITS Sukolilo, Surabaya 60111, Indonesia

autor

Zainuri M.

• 1Department of Physics, Faculty of Mathematics and Sciences, Institut Teknologi Sepuluh Nopember (ITS), Kampus ITS Sukolilo, Surabaya 60111, Indonesia

autor

Darminto D.

• Department of Physics, Faculty of Mathematics and Sciences, Institut Teknologi Sepuluh Nopember (ITS), Kampus ITS Sukolilo, Surabaya 60111, Indonesia
• Department of Physics, Universitas Negeri Surabaya (UNESA), Kampus UNESA Ketintang, Surabaya 60231, Indonesia

Bibliografia

• [1] HONG Z., LIU A., CHEN L., CHEN X., JING X., J. Non-Cryst. Solids, 355 (2009), 368.
• [2] JANG H.D., CHANG H.K., YOON H.S., CHO K., PARK J.H., OH S.Y., Colloid. Surface. A, 313 – 314 (2008), 121.
• [3] KALAPATHY U., PROCTOR A., SHULTZ J., Bioresource Technol., 85 (2002), 285.
• [4] AFFANDI S., SETYAWAN H., WINARDI S., PURWANTO A., BALGIS R., Adv. Powder Technol., 20 (2009), 468
• [5] WALKOWIAK M., ZALEWSKA A., JESIONOWSKI T., POKORA M., J. Power Sources, 173 (2007), 721.
• [6] OSI´N SKA M., WALKOWIAK M., ZALEWSKA A., JESIONOWSKI T., J. Membrane Sci., 326 (2009), 582.
• [7] JESIONOWSKI T., BULA K., JANISZEWSKI J., JURGA J., Compos. Interface., 10 (2003), 225.
• [8] DZIADAS M., NOWACKA M., JESIONOWSKI T., JELE´N H.H., Anal. Chim. Acta, 699 (2011), 66.
• [9] NITTAYA T., NUNTIYA A., Chiang Mai J. Sci., 35 (1) (2008), 206.
• [10] AHMAD T., MAMAT O., AHMAD R., J. Nanoparticles, 2013 (2013), 1.
• [11] TRABELSI W., BENZINA M., BOUAZIZ S., Phys. Procedia, 2 (2009), 1461.
• [12] MORI H., J. Ceram. Soc. Jpn., 111 (2003), 376.
• [13] MUNASIR Z., SULTON A., TRIWIKANTORO T., ZAINURI M., DARMINTO D., AIP Conf. Proc., 1555 (2013), 28.
• [14] YU K., GUO Y., DING X., ZHAO J., WANG Z., Mater. Lett., 59 (2005), 4013.
• [15] JESIONOWSKI T., J. Mater. Process. Tech., 203 (2008), 121.
• [16] WASEEM M., MUSTAFA S., NAEEM A., SHAH K.H., SHAH I., IHSAN-UL-HAQUE., J. Park. Mater. Soc., 3 (1) (2009), 19.
• [17] RAHMAN I.A., VEJAYAKUMARAN P., SIPAUT C.S., ISMAIL J., CHEE C.K., Ceram. Int., 34 (2008), 2059.
• [18] KRYSZTAFKIEWICZ A., RAGER B., JESIONOWSKI T., J. Mater. Sci., 32 (1997), 1333.
• [19] SCHLOMACH J., KIND M., J. Colloid Interf. Sci., 277 (2004), 316.
• [20] SCHAER E., RAVETTI R., PLASARI E., Chem. Eng. Process., 40 (2001), 277.
• [21] TABATABAEI S., SHUKOHFAR A., AGHABABAZADEH R., MIRHABIBI A., J. Phys.-Conf. Ser., 26 (2006), 371.
• [22] HOSOKAWA M., NOGI K., NAITO M., YOKOYAMA T., Nanoparticle Technology Handbook, Elsevier Science, Oxford, 2007.
• [23] DITTRICH H., BIENIOK A., Measurement Methods. Structural Properties: X-Ray and Neutron Diffraction, in Garche J. (Ed.), Encyclopedia of Electrochemical Power Sources, Elsevier, Amsterdam, 2009, p. 718.
• [24] BECKHOFF B., KANNGIESSER B., LANGHOFF N., WEDELL R., WOLFF H., Handbook of Practical X-Ray Fluorescence Analysis, Springer-Verlag, Berlin – Heidelberg, 2006.
• [25] KLAPISZEWSKI Ł., ZDARTA J., SZATKOWSKI T., WYSOKOWSKI M., NOWACKA M., SZWARC-RZEPKA K., BARTCZAK P., SIWI´N SKA-STEFA´N SKA K., EHRLICH H., JESIONOWSKI T., Cent. Eur. J. Chem., 12 (2014), 719.
• [26] UI S.W., LIM S.J., LEE S.H., CHI S.C., J. Ceram. Process. Res., 10 (4) (2009), 553.
• [27] MATSUMOTO A., TSUTSUMI K., SCHUMACHER K., UNGER K. K., Langmuir, 18 (2002), 4014.
• [28] SNYDER R.L., Powder Diffr., 7 (1992), 186.
• [29] WASEDA Y., MATSUBARA E., SHINODA K., X-Ray Diffraction Crystallography, Springer-Verlag, Heidelberg – Dordrecht – London – New York, 2011.
• [30] SHADE J.O., X-Ray Characterisation of Nanostructured Material, S3 Thesis, Department of Chemistry, Technical University of Denmark, 2007.
• [31] JAL P.K., SUDARSHAN M., SAHA A., PATEL S., MISHRA B.K., Colloid. Surface A., 240 (2004), 173.