Numerical results quality in dependence on Abaqus plane stress elements type in big displacements compression test

• Autorzy: Kawecki B. , Podgórski J.

Identyfikatory

DOI

10.23743/acs-2017-29

• Języki publikacji: EN

Abstrakty

EN

The paper presents a brief description of the Abaqus Simulia plane stress quadrilateral elements (CPS4R, CPS4I, CPS4, CPS8R, CPS8). Comparison of the results quality obtained using each of them was done. There was considered two dimensional big displacements compression test for a highly orthotropic material. Simulations were performed for the compression in two perpendicular directions.

Słowa kluczowe

EN

Abaqus; finite elements; plane stress; orthotropic material

PL

Abaqus; materiał ortotropowy; ściskanie; elementy skończone

• Wydawca: Polskie Towarzystwo Promocji Wiedzy ; Lublin University of Technology
• Czasopismo: Applied Computer Science
• Rocznik: 2017
• Tom: Vol. 13, no 4
• Strony: 56--64
• Opis fizyczny: Bibliogr. 12 poz., fig.

Twórcy

autor

Kawecki B.

• Lublin University of Technology, Faculty of Civil Engineering and Architecture, Department of Structural Mechanics, Nadbystrzycka 40, 20-618 Lublin, Poland

autor

Podgórski J.

• Lublin University of Technology, Faculty of Civil Engineering and Architecture, Department of Structural Mechanics, Nadbystrzycka 40, 20-618 Lublin, Poland

Bibliografia

• 1. Abaqus/CAE V6.14 User's Manual.
• 2. Armstrong, C. G. (1994), Modelling requirements for finite-element analysis. In Computer-Aided Design, Vol. 26, 573–578, https://doi.org/10.1016/0010-4485(94)90088-4.
• 3. Barlow, J. (1989), More on optimal stress points – reduced integration, element distortions and error estimation. International Journal of Numerical Methods in Engineering, Vol. 28, 1487–1504, doi:10.1002/nme.1620280703.
• 4. Bathe, K. J. (2014). Finite Element Procedures. Second Edition, 341–389.
• 5. Cook R. D., Malkus, D.S., Plesha M. E., Witt R.J.(2002), Concepts and Applications of FEA, 4th ed., John Wiley&Sons, Inc., 98–102.
• 6. Jones, R. M. (1999), Mechanics of Composite Materials. Second Edition, 55–73.
• 7. Lekhnitskii S.G. (1981), Theory of Elasticity of an Anisotropic Elastic Body, Mir Publishers.
• 8. Lee, N. S., & Bathe, K. J. (1993), Effects of element distortions on the performance of isoparametric elements. International Journal of Numerical Methods in Engineering, Vol. 36, 3553–3576, doi:10.1002/nme.1620362009.
• 9. Liu, G. R. & Quek, S. S. (2014), The Finite Element Method. A Practical Course. Second Edition, 161–211.
• 10. Macneal, R. H., & Harder, R. L. (1985), A proposed standard set of problems to test finite element accuracy. In Finite Elements in Analysis and Design, Vol. 1, 3–20, https://doi.org/10.1016/0168-874X(85)90003-4.
• 11. Turcke, D. J., & McNeice, G. M. (1974), Guidelines for selecting finite element grids based on an optimization study. In Computers & Structures, Vol. 4, 499–519, https://doi.org/10.1016/0045-7949(74)90003-0.
• 12. Zienkiewicz, O. C., & Taylor, R. L. (2000). The Finite Element Method. Fifth Edition. Volume 1: The Basis, 164–198.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)