Fracture toughness, wear, and microstructure properties of aluminum/titanium/steel multi-laminated composites produced by cross-accumulative roll-bonding process

• Autorzy: Wang Yaping , Tayyebi Moslem , Assari Amirhossein

Identyfikatory

DOI

10.1007/s43452-021-00355-8

• Języki publikacji: EN

Abstrakty

EN

For more than a decade many researchers have been developing new ways to produce laminated composites. In this paper, aluminum/titanium/steel multi-laminated composites were fabricated by the cross accumulative roll bonding (CARB) process, and effects of different rolling passes on microstructure, and mechanical properties were investigated. As the number of rolling passes increased, in spite of having no voids and cracks, more instabilities were observed on titanium and steel layers. With regard to mechanical properties, by increasing the rolling passes, the values of ultimate and yield strength, as well as elongation fell, because of the non-uniform distribution of hard layers within the aluminum matrix. Based on scanning electron microscopy (SEM) images, both ductile and cleavage modes of fracture were observed on fracture surfaces. Furthermore, with an increase in the number of rolling passes, the values of fracture toughness pertaining to the crack initiation declined on account of the increased probability of delamination. Plus, the trend of the R-curves was mainly downward due to the growing number of interfaces within the matrix by increasing the number of passes; nonetheless, the upward trend of these curves may be attributed to the ductile Al matrix in which the path of cracks can be bridged. Also, based on the results of wear tests, different wear mechanisms such as adhesion, abrasion, and delamination were observed, and with an increase in the number of rolling passes, the amount of weight loss showed a decline which was due to the rise of hardness concerning the strain-hardened layers.

Słowa kluczowe

EN

multi-laminated composite; mechanical properties; fracture toughness; fracture modes; CARB rolling passes

PL

kompozyt wielowarstwowy; właściwości mechaniczne; odporność na pękanie; walcowanie

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2022
• Tom: Vol. 22, no. 1
• Strony: art. no. e49, 2022
• Opis fizyczny: Bibliogr. 27 poz., rys., wykr.

Twórcy

autor

Wang Yaping

• School of Materials Science and Engineering, Southeast University, Nanjing 211189, China

autor

Tayyebi Moslem

• Department of Materials Science and Engineering, Shiraz University of Technology, Modarres Blvd., Shiraz, Iran

• https://orcid.org/0000-0001-8243-7860

autor

Assari Amirhossein

• Department of Material Engineering, Sahand University of Technology, Tabriz, Iran

Bibliografia

• 1. Anderson TL. Fracture mechanics: fundamentals and applications. Boca Raton: CRC Press; 2017.
• 2. Rana S, Fangueiro R. Advanced composite materials for aerospace engineering: processing, properties and applications. Sawston: Woodhead Publishing; 2016.
• 3. Wang P, Chen Z, Hu C, Li B, Mo T, Liu Q. Effects of annealing on the interfacial structures and mechanical properties of hot roll bonded Al/Mg clad sheets. Mater Sci Eng. 2020;792: 139673.
• 4. Azimi M, Toroghinejad MR, Shamanian M, Kestens LA. The effect of strain on the formation of an intermetallic layer in an Al-Ni laminated composite. Metals. 2017;7(10):445.
• 5. Tayyebi M, Rahmatabadi D, Karimi A, Adhami M, Hashemi R. Investigation of annealing treatment on the interfacial and mechanical properties of Al5052/Cu multilayered composites subjected to ARB process. J Alloy Compound. 2021;871: 159513.
• 6. Assari AH, Eghbali B. Microstructure and kinetics of intermetallic phase formation during solid state diffusion bonding in bimetal Ti/Al. Phys Met Metall. 2019;120(3):260–8.
• 7. Pei Y, Huang T, Chen F, Pang B, Guo J, Xiang N, Song Z, Zhang Y. Microstructure and fracture mechanism of Ti/Al layered composite fabricated by explosive welding. Vacuum. 2020;181: 109596.
• 8. Avazzadeh M, Alizadeh M, Tayyebi M. Structural, mechanical and corrosion evaluations of Cu/Zn/Al multilayered composites subjected to CARB process. J Alloy Compound. 2021;867: 158973.
• 9. Zhang L, Gao R, Zhao B, Sun M, Jing K, Wang X, Hao T, Xie Z, Liu R, Fang Q. Effects of annealing temperature and layer thickness on hardening behavior in cross accumulative roll bonded Cu/Fe nanolamellar composite. J Alloy Compound. 2020;827: 154312.
• 10. Kalantarrashidi N, Alizadeh M. Structure, wear and corrosion characterizations of Al/20wt% Zn multilayered composites fabricated by cross-accumulative roll bonding. J Manuf Process. 2020;56:1050–8.
• 11. Talebian M, Alizadeh M. Manufacturing Al/steel multilayered composite by accumulative roll bonding and the effects of subsequent annealing on the microstructural and mechanical characteristics. Mater Sci Eng A. 2014;590:186–93.
• 12. Rohatgi A, Harach DJ, Vecchio KS, Harvey KP. Resistance-curve and fracture behavior of Ti–Al 3Ti metallic–intermetallic laminate (MIL) composites. Acta Mater. 2003;51(10):2933–57.
• 13. Li T, Al Olevsky E, Meyers MA. The development of residua stresses in Ti 6 Al 4 V-Al 3 Ti metal-intermetallic laminate (MIL) composites. Mater Sci Eng. 2008;473(1–2):49–57.
• 14. Rahmatabadi D, Tayyebi M, Sheikhi A, Hashemi R. Fracture toughness investigation of Al1050/Cu/MgAZ31ZB multi-layered composite produced by accumulative roll bonding process. Mater Sci Eng A. 2018;734:427–36.
• 15. Huang J, Tayyebi M, Assari AH. Effect of SiC particle size and severe deformation on mechanical properties and thermal conductivity of Cu/Al/Ni/SiC composite fabricated by ARB process. J Manuf Process. 2021;68:57–68.
• 16. Dimiduk D. Gamma titanium aluminide alloys—an assessment within the competition of aerospace structural materials. Mater Sci Eng A. 1999;263(2):281–8.
• 17. Martin P. Introduction to surface engineering and functionally engineered materials. Hoboken: John Wiley & Sons; 2011.
• 18. Ma M, Meng X, Liu W. Microstructure and mechanical properties of Ti/Al/Ti laminated composites prepared by hot rolling. J Mater Eng Perform. 2017;26(7):3569–78.
• 19. Tayyebi M, Eghbali B. Microstructure and mechanical properties of SiC-particle-strengthening tri-metal Al/Cu/Ni composite produced by accumulative roll bonding process. Int J Miner Metall Mater. 2018;25(3):357–64.
• 20. Jamaati R, Amirkhanlou S, Toroghinejad MR, Niroumand B. CAR process: a technique for significant enhancement of as-cast MMC properties. Mater Charact. 2011;62(12):1228–34.
• 21. Adharapurapu RR, Vecchio KS, Jiang F, Rohatgi A. Fracture of Ti-Al 3 Ti metal-intermetallic laminate composites: effects of lamination on resistance-curve behavior. Metall Mater Trans A. 2005;36(11):3217–36.
• 22. Rahmatabadi D, Ahmadi M, Pahlavani M, Hashemi R. DIC-based experimental study of fracture toughness through R-curve tests in a multi-layered Al-Mg (LZ91) composite fabricated by ARB. J Alloys Compound. 2021. https://doi.org/10.1016/j.jallcom.2021.160843.
• 23. Akbarpour M, Mirabad HM, Alipour S. Microstructural and mechanical characteristics of hybrid SiC/Cu composites with nano-and micro-sized SiC particles. Ceram Int. 2019;45(3):3276–83.
• 24. Talachi AK, Eizadjou M, Manesh HD, Janghorban K. Wear characteristics of severely deformed aluminum sheets by accumulative roll bonding (ARB) process. Mater Charact. 2011;62(1):12–21.
• 25. Gao N, Wang CT, Wood RJ, Langdon TG. Tribological properties of ultrafine-grained materials processed by severe plastic deformation. J Mater Sci. 2012;47(12):4779–97.
• 26. Sadeghinia H, Jafarian H, Salehi M, Eivani A. Comprehensive investigation on wear and microstructure development in Al/tiultrafine grained multi-layered composite produced by Accumulative Roll Bonding (ARB). Mater Res Express. 2019;6(11): 116572.
• 27. Jamaati R, Naseri M, Toroghinejad MR. Wear behavior of nanostructured Al/Al 2 O 3 composite fabricated via accumulative roll bonding (ARB) process. Mater Des. 2014;59:540–9.

Uwagi

PL

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)