Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The paper deals with technical aspects of the measurements of conducted disturbance levels in the electrical circuits of typical car vehicles. The work includes project, execution and a testing of new laboratory stand for analysis disturbances in the electrical circuits of car. The block diagram of the laboratory stand is shown in Fig. 1. Designed structure of the electrical installation is typical for the classic cars. The structure includes only the basic electrical circuits. The voltage level assumed in the installation is equal 12 VDC (car accumulator power supply). The commercial car loads (lighting, audio, ignition system, low power electric motors, etc.) are installed in the laboratory stand (Fig. 2). The selected test results of the laboratory stand (ignition system and power supply parameters in circuits) are presented in the chapter 3. The laboratory stand also allows to execute among others the immunity tests of selected components against electrostatic discharges.
Wydawca
Czasopismo
Rocznik
Tom
Strony
271--274
Opis fizyczny
Bibliogr. 6 poz., fot., rys., wykr.
Twórcy
autor
- The Department of Measurement Science, Electronics and Control, Silesian University of Technology Akademicka 10 street, 44-100 Gliwice
autor
- The Department of Measurement Science, Electronics and Control, Silesian University of Technology Akademicka 10 street, 44-100 Gliwice
autor
- The Department of Measurement Science, Electronics and Control, Silesian University of Technology Akademicka 10 street, 44-100 Gliwice
Bibliografia
- [1] Gonscz D.: Generator of conducted disturbance for immunity tests of electric automotive equipment, Measurement Automation Monitoring, May 2015, vol. 61, no. 05.
- [2] Gonscz D.: AC/DC power amplifier dedicated for immunity testing of electronic devices, Measurement Automation Monitoring, October 2016, vol. 62, no. 10.
- [3] Rybak T., Steffka M.: Automotive Electromagnetic Compatibility (EMC), Kluwer Academic Publishers, Dordrecht, 2004, TLFeBOOK.
- [4] Rodriguez V. (ETS-Lindgren L. P.): Automotive Component EMC Testing: CISPR 25, ISO 11452-2 and Equivalent Standards. Automotive EMC, Safety & EMC 2011, http://www.semc.cesi.cn.
- [5] Yastrebov A. I., Gad S., Słoń G., Zawadzki A.: Analysis of computer intelligent diagnostic models in automotive vehicle’s electrical equipment, Proc. of the 15th international Conference on Systems Science, Systems Science XV, vol. III, Wrocław, 2004.
- [6] Clayton R.: Introduction to Electromagnetic Compatibility, Wiley-Interscience, USA, 2006
Uwagi
EN
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-123126c4-8425-4d52-a27d-8a1132933f0c