Acoustic Emission Response and Damage Process for Q235 Steel in an in Situ Tensile Test

• Autorzy: Zhang Ying , Li Yue , Lai Huan Sheng , Bai Chunmei , Liu Kang Lin

Identyfikatory

DOI

10.24425/aoa.2019.129735

• Języki publikacji: EN

Abstrakty

EN

Q235 steel is widely used in engineering and construction. Therefore, it is important to identify the damage mechanism and the acoustic emission (AE) response of the material to ensure the safety of structures. In this study, an AE monitor system and an in situ tensile test with an optical microscope were used to investigate the AE response and insight into the damage process of Q235 steel. The surface of the specimen was polished and etched before the test in order to improve the quality of micrographs. Two kinds of AE responses, namely a burst and a continuous signal, were recorded by the AE monitor system during the test. Based on the in situ test, it was observed that the damage of Q235 steel was induced by the crystal slip and the inclusion fracture. Since the crystal slip was an ongoing process, continuous AE signals were produced, while burst AE signals were possibly produced by the inclusion fracture which occurred suddenly with released higher energy. In addition, a great number of AE signals with high amplitude were observed during the yielding stage and then the number and amplitude decreased.

Słowa kluczowe

EN

Q235; damage; acoustic emission; in situ tensile test

• Wydawca: Instytut Podstawowych Problemów Techniki PAN ; Komitet Akustyki PAN ; Polskie Towarzystwo Akustyczne
• Czasopismo: Archives of Acoustics
• Rocznik: 2019
• Tom: Vol. 44, No. 4
• Strony: 807--813
• Opis fizyczny: Bibliogr. 21 poz., rys., tab., wykr.

Twórcy

autor

Zhang Ying

• School of Environmental & Safety Engineering, Changzhou University, Changzhou 213164, China

autor

Li Yue

• Northeast Petroleum University, Daqing 163000, China

autor

Lai Huan Sheng

• Sino-French Institute of Nuclear Engineering and Technology, Sun Yat-sen University, Zhuhai 519082, China

autor

Bai Chunmei

• School of Civil Engineering, Sun Yat-sen University, Zhuhai 519082, China

autor

Liu Kang Lin

• School of Chemical Engineering, Fuzhou University, Fuzhou, 350-116, China

Bibliografia

• 1. Bohlen J., Chmelík F., Dobroň, Letzig D., Lukáč P., Kainer K. U. (2004), Acoustic emission during tensile testing of magnesium AZ alloys, Journal of Alloys and Compounds, 378, 214-219, doi: 10.1016/j.jallcom.2003.10.101.
• 2. Chen Z., Hao X., Wang Y., Zhao K. (2014), In-situ observation of tensile fracture in A357 casting alloys, Journal of Materials Science & Technology, 30, 2, 139-145, doi: 10.1016/j.jmst.2013.04.014.
• 3. Casiez N., Deschanel S., Monnier T., Lame O. (2014), Acoustic emission from the initiation of plastic deformation of polyethylenes during tensile tests, Polymer, 55, 25, 6561-6568, doi: 10.1016/j.polymer.2014.09.044.
• 4. Heiple C. R., Carpenter S. H. (1987), Acoustic emission produced by deformation of metals and alloys – a review, Part I, Journal of Acoustic Emission, 6, 3, 177-204.
• 5. Haidar K., Pijaudier-Cabot G., Dubé J. F., Loukili A. (2005), Correlation between internal length, fracture, process zone and size effect in mortar and model materials, Materials and Structures, 38, 2, 201-210, doi: 10.1007/BF02479345.
• 6. Ito K., Enoki M. (2007), Acquisition and analysis of continuous acoustic emission waveform for classification of damage sources in ceramic fiber mat, Materials Transactions, 48, 6, 1221-1226, doi: 10.2320/matertrans.I-MRA2007850.
• 7. Jiang Y., Xu F. (2012), Research on source location from acoustic emission tomography, 30th European Conference on Acoustic Emission Testing & 7th International Conference on Acoustic Emission, Granada, Spain.
• 8. Jiang Y., Xu F., Xu B. (2015), Acoustic emission tomography based on simultaneous algebraic reconstruction technique to visualize the damage source location in Q235B steel plate, Mechanical Systems and Signal Processing, 64-65, 452-464, doi: 10.1016/j.ymssp.2015.04.013.
• 9. Lugo M., Jordon J. B., Horstemeyer M. F., Tschopp M. A., Harris J., Gokhale A. M. (2011), Quantification of damage evolution in a 7075 aluminum alloy using an acoustic emission technique, Materials Science and Engineering A, 528, 22-23, 6708-6714, doi: 10.1016/j.msea.2011.05.017.
• 10. Li Z., Limodin N., Tandjaoui A., Quaegebeur P., Witz J., Balloy D. (2016), Damage investigation in A319 aluminum alloy by digital image correlation during in-situ tensile tests, Procedia Structural Integrity, 2, 3415-3422, doi: 10.1016/j.prostr.2016.06.426.
• 11. Mire E., Carmona V., Courbon J., Ludwig W. (2007), Fast X-ray tomography and acoustic emission study of damage in metals during continuous tensile tests, Acta Materialia, 55, 20, 6806-6815, doi: 10.1016/j.actamat.2007.08.043.
• 12. Rabiei M., Modarres M. (2013), Quantitative methods for structural health management using in situ acoustic emission monitoring, International Journal of Fatigue, 49, 81–89, doi: 10.1016/j.ijfatigue.2012.12.001.
• 13. Reuther G. M., Pufall R. Goroll M. (2014), Acoustic detection of micro-cracks in small electronic devices, Microelectronics Reliability, 54, 9-10, 2118-2122, doi: 10.1016/j.microrel.2014.07.129.
• 14. Shao H., Zhao Y., Ge P., Zeng W. (2013), In-situ SEM observations of tensile deformation of the lamellar microstructure in TC21 titanium alloy, Materials Science & Engineering A, 559, 515-519, doi: 10.1016/j.msea.2012.08.134.
• 15. Su F., Li T., Pan X., Miao M. (2018), Acoustic emission responses of three typical metals during plastic and creep deformations, Experimental Techniques, 42, 6, 685-691, doi: 10.1007/s40799-018-0274-x.
• 16. Trojanová Z., Száraz Z., Chmelík F., Lukáč P. (2010), Acoustic emission from deformed Mg-Y-Nd alloy and this alloy reinforced with SiC particles, Journal of Alloys and Compounds, 504, 2, L28-L30, doi: 10.1016/j.jallcom.2010.05.138.
• 17. Wu Z., Shen G., Wang S. (2008), The acoustic emission monitoring during the bending test of Q235 steel box beam, 17th word conference on nondestructive testing, Shanghai, China, pp. 25-28.
• 18. Xu J., Wu X., Han E. (2011), Acoustic emission during pitting corrosion of 304 stainless steel, Corrosion Science, 53, 4, 1537-1546, doi: 10.1016/j.corsci.2011.01.030.
• 19. Zhang Y., Zhang W., Xu F., Zhang Y., Jiang Y. (2015), Acoustic emission characteristics of Q235B steel plates’ tensile damage tests [in Chinese], Journal of Vibration and Shock, 34, 15, 156-161, 10.13465/j.cnki.jvs.2015.15.028.
• 20. Zhang K., Ni L., Lei Z., Chen Y., Hu X. (2017), In situ investigation of the tensile deformation of laser welded Ti2AlNb joints, Materials Characterization, 123, 51-57, doi: 10.1016/j.matchar.2016.11.009.
• 21. Zhang X., Zhang S., Zhao Q., Zhao Y., Li R.,Zeng W. (2018), In-situ observations of the tensile deformation and fracture behavior of a fine-grained titanium alloy sheet, Journal of Alloys and Compounds, 740, 660-668, doi: 10.1016/j.jallcom.2018.01.009.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).