PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Design of the turbocharger bearing arrangement to increase the overall efficiency of the combustion engine

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The main objective of this study was to design a journal bearing, such that it can withstand the forces that arise in context to increasing the length of the shaft in an automotive turbocharger. The work will also provide information on how the design changes affect the overall performance of the bearing. The design changes include the thickness of the oil film, the number of grooves, the dimension of the grooves, the number of inlets and outlets, the dimension of the babbitt and mainly the length of the journal bearing. The simulation models were created using CATIA V5 and the analysis is done using ANSYS 19.2. The flow is considered to be laminar and is calculated using Reynold’s Equation. The new concept gave insight on how the design considerations affect the pressure distribution and the pressure developed. From the results, it was interpreted that the new design can withstand the four times the pressure while distributing the pressure over twice the original design.
Czasopismo
Rocznik
Strony
83--89
Opis fizyczny
Bibliogr. 24 poz., il. kolor., 1 wykr.
Twórcy
  • Faculty of Mechanical Engineering, Wroclaw University of Science and Technology
  • Graduate of Faculty of Mechanical Engineering, Wroclaw University of Science and Technology
  • Faculty of Mechanical Engineering, Wroclaw University of Science and Technology
Bibliografia
  • [1] ANSYS Fluent Tutorial Guide. Ansys Inc. 2017.
  • [2] BAINES, N.C. Fundamentals of Turbocharging. Concepts ETI, Inc. 0933283148, 2005.
  • [3] BOMPOS, D.A., NIKOLAKOPOULOS, P.G. Tribological design of a multistep journal bearing. Simulation Modelling Practice and Theory. 2016, 68, 18-32. https://doi.org/10.1016/j.simpat.2016.07.002
  • [4] CAMPO E.A. Plastic journal bearing design. The Complete Part Design Handbook, 2006, 335-376.
  • [5] CHEN, W.J. Rotordynamics and bearing design of turbo-chargers. Mechanical Systems and Signal Processing. 2012, 29, 77-89. https://doi.10.1016/j.ymssp.2011.07.025
  • [6] CHUEPENG, S., SAIPOM, S. Lubricant thermo-viscosity effects on turbocharger performance at low engine load. Applied Thermal Engineering. 2018, 139, 334-340. https://doi.org/10.1016/j.applthermaleng.2018.05.002
  • [7] CYPKO, E., KALDONSKI, T. Influence of lubricated sliding couple structural material type on generated potential difference value. Journal of KONES Powertrain and Transport. 2011, 18(1).
  • [8] DOWSON, D., TAYLOR, C.M., GODET, M. et al. Fluid film lubrication - Osborne Reynolds centenary. Proceedings of 13th Leeds-Lyon Symposium on Tribology. 1986, 11. University of Leeds, England.
  • [9] KALDONSKI, T. Fundamentals of analysing od tribological processes. WAT Publisher. Warsaw 2015 (in Polish).
  • [10] KOUTSOVASILIS, P., DRIOT, N., DAIXING, L. et al. Quantification of sub-synchronous vibrations for turbo-charger rotors with full-floating ring bearings. Archive Applied Mechanics. 2015, 85(4), 481-502. https://doi.org/10.1007/s00419-014-0924-0
  • [11] LAWROWSKI, Z. Tribology. friction, wear and lubrication. PWN Publisher. Warsaw 1993 (in Polish).
  • [12] LI, C., WANG, Y., JIA, B. et al. Application of Miller cycle with turbocharger and ethanol to reduce NOx and particulates emissions from diesel engine - a numerical approach with model validations. Applied Thermal Engineering. 2019, 150, 904-911. https://doi.org/10.1016/j.applthermaleng.2019.01.056
  • [13] MANSHOOR, B., JAAT, M., IZZUDDIN, Z. et al. CFD analysis of thin film lubricated journal bearing. Procedia Engineering. 2013, 68, 56-62. https://doi.org/10.1016/j.proeng.2013.12.147
  • [14] NICHOLAS, J., ALLAIRE, P., LEWIS, D. Stiffness and damping coefficients for finite length step journal bearings. ASLE Transactions. 2008, 23(4), 353-362. https://doi.org/10.1080/05698198008982979
  • [15] ROMAGNOLI, A., MANIVANNAN, A., RAJOO, S. et al. A review of heat transfer in turbochargers. Renewable and Sustainable Energy Reviews. 2017, 79, 1442-1460. https://doi.org/10.1016/j.rser.2017.04.119
  • [16] ROY L., LAHA, S. Steady state and dynamic characteristics of axial grooved journal bearings. Tribology International. 2009, 42(5), 754-761, https://doi.org/10.1016/j.triboint.2008.10.010
  • [17] SCOTT, R. Journal bearings and their lubrication. Machinery Lubrication. Publish by Noria. 2005, 7, https://www.machinerylubrication.com/Read/779/journal-bearing-lubrication
  • [18] SCHWARZ, J.B., ANDREWS, D.N. Considerations for gas stand measurement of turbocharger performance. Proceedings 11th International Conference on Turbochargers and Turbocharging. 2014, 253-264. Institute of Mechanical Engineers, London.
  • [19] SEP, J., TOMCZEWSKI, L., GALDA, L. et al. The study on abrasive wear of grooved journal bearings. Wear. 2017, 376-377, 54-62. https://doi.org/10.1016/j.wear.2017.02.034
  • [20] SHAABAN, S., SEUME, J. Impact of turbocharger non-adiabatic operation on engine volumetric efficiency and turbo lag. International Journal of Rotating Machinery. 2011, 2012. https://doi.org/10.1155/2012/625453
  • [21] SJOBERG, E. Friction characterization of turbocharger bearings. Master of Science Thesis MMK. 2013, 149.
  • [22] STAHL, J., JACOBSON, B.O. Design function for hydrodynamics bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2001, 215(5), 405-416. https://doi.org/10.1243/1350650011543637
  • [23] SUMMER, F., GRÜN, F., OFFENBECHER, M. et al. Challenges of friction reduction of engine plain bearings - tackling the problem with novel bearing materials. Tribology International. 2018, 131, 238-250. https://doi:10.1016/j.triboint.2018.10.042
  • [24] VANHAELST, R., KHEIR, A., CZAJKA, J. A systematic analysis of the friction losses on bearings of modern turbocharger. Combustion Engines. 2016, 164(1), 22-31. https://doi.org/10.19206/CE-116485
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-120893b3-58af-4058-a60e-4a5a6915843e
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.