Holonomicity analysis of electromechanical system on the example of simple switched reluctance motor

• Autorzy: Wciślik M. , Suchenia K.
• Języki publikacji: EN

Abstrakty

EN

The paper deals with a single-phase reluctance motor used to test the motion equations of an electromechanical system. The identification of the motor electric parameters as a function of the rotation angle of the rotor was carried out using AC 50 Hz voltage source. A mechanical part of the system was designed as a physical pendulum containing the motor rotor and a metal bar mounted on the rotor axis. The parameters of the mechanical part were measured during the pendulum oscillations. The work presents the characteristics and motion equation parameters of the motor dynamics. The reluctance motor motion equation does not fullfil the power balance. The parameters of the motion equations obtained from the experiment and from the second order Lagrange’a equations are compared. The derivation of motion equation, together with a discussion of holonomicity of electromechanical systems is also presented.

Słowa kluczowe

EN

motion equations; Lagrange function; nonholonomicity; power balance; reluctance motor

• Wydawca: Wydawnictwo Politechniki Poznańskiej
• Czasopismo: Computer Applications in Electrical Engineering
• Rocznik: 2015
• Tom: Vol. 13
• Strony: 330--339
• Opis fizyczny: Bibliogr. 13 poz., rys.

Twórcy

autor

Wciślik M.

• Kielce University of Technology 25-314 Kielce, Al. Tysiąclecia Państwa Polskiego 7

autor

Suchenia K.

• Kielce University of Technology 25-314 Kielce, Al. Tysiąclecia Państwa Polskiego 7

Bibliografia

• [1] Tomczewski K., Symulacja pracy napędu z nowym układem zasilania przełączalnego silnika reluktancyjnego, Przegląd Elektrotechniczny 2009.
• [2] Yong-Ho Y., Jae-Moon K., Chung-Yuen W., Byoung-Kuk L., New approach to SRM drive with six-switch converter 2009, Mechatronics 19, 2009, pp. 1321–1333.
• [3] R. Krishnan, Switched Reluctance Motor Drives: Modeling, Simulation, Analysis, Design, and Applications, CRC Press LLC, 2001,pp. 39-40.
• [4] Sheng-Ming Y., Controlled Dynamic Braking for Switched Reluctance Motor Drives With a Rectifier Front End, IEEE Trans. On Industrial Electronics, vol. 60, no.11, Nov. 2013.
• [5] Shun-Chung W., An fully-automated measurement system for identifying magnetization characteristics of switched reluctance motors, Measurement 45, 2012, pp. 1226–1238.
• [6] Miller T. J. E., Brushless Permanent-Magnet and Reluctance Motor Drives, Oxford University Press, 1989, pp.168–169.
• [7] Miller T. J. E., Electronic Control of Switched Reluctance Machines, Newnes Power Engineering Series, 2001, pp.37–38.
• [8] Skvarenina T. L., The Power Electronics Handbook Industrial Electronics Series, CRC Press LLC, 2002, pp.421.
• [9] Wciślik M., Suchenia K.: Model i bilans mocy czynnej przełączalnego silnika reluktancyjnego, Przegląd Elektrotechniczny 2014.
• [10] Wciślik M., Suchenia K.: Model i bilans mocy czynnej przełączalnego silnika reluktancyjnego, Przegląd Elektrotechniczny 2014.
• [11] Landau L. D., Lifszyc J. M., Mechanika PWN Warszawa 2007.
• [12] Nejmark J. I., Fufajew N. A., Dynamika układów nieholonomicznych, PWN, 1971.
• [13] Bishop R. E. D., Gladwell G. M. L., Michaelson S., Macierzowa analiza drgań, WNT, Warszawa 1972.