Application of FFF Method in Orthopedics

• Autorzy: Kiełbus A. , Furyk-Grabowska K. , Ostrowska K.
• Języki publikacji: EN

Abstrakty

EN

As a part of realization of international project "3DCENTRAL - Catalyzing Smart Engineering and Rapid Prototyping" the cooperation with 3DFly enterprise and Lewkowicz Orthopedic Studio has been started concerning production of hand epithesis with use of method Fused Filament Fabrication (FFF). In the article, two different cases of producing the epithesis was described, as well as the process of creating the cover of the lower extremity adjusted to the patient’s needs.

Słowa kluczowe

EN

rapid prototyping; FFF method; 3D print; 3DCentral; epithesis; orthopedics

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Research
• Rocznik: 2016
• Tom: Vol. 40, No. 3
• Strony: 67--78
• Opis fizyczny: Bibliogr., 10 poz., il., rys.

Twórcy

autor

Kiełbus A.

• Cracow University of Technology, Product Engineering Institute

autor

Furyk-Grabowska K.

• 3D FLY

autor

Ostrowska K.

• Cracow University of Technology, Laboratory of Coordinate Metrology

Bibliografia

• 1. Bibb, R., Eggbeer, D., and Paterson, A. (2014). Medical modelling: the application of advanced design and rapid prototyping techniques in medicine. Woodhead Publishing.
• 2. Chia, H. N. and Wu, B. M. (2015). Recent advances in 3d printing of biomaterials. Journal of biological engineering, 9(1):4.
• 3. Corney, J., Hieu, L., Zlatov, N., Vander Sloten, J., Bohez, E., Khanh, L., Binh, P., Oris, P., and Toshev, Y. (2005). Medical rapid prototyping applications and methods. Assembly Automation, 25(4):284–292.
• 4. El-Ghannam, A., Hart, A., White, D., and Cunningham, L. (2013). Mechanical properties and cytotoxicity of a resorbable bioactive implant prepared by rapid prototyping technique. Journal of Biomedical Materials Research Part A, 101(10):2851–2861.
• 5. Haq, A. and Haq, R. (2015). Characterization and development of polycaprolactone (PCL) /montmorillonite (MMT) /hydroxapaptite (HA) nanocomposites for fused deposition modelling (FDM) process. PhD thesis, Universiti Tun Hussein Onn Malaysia.
• 6. Karbowski, K., Banach, M., Czepko, R., Masłowski, P., and Sujka, W. (2014). Inżynieria rekonstrukcyjna w modelowaniu wyrobów medycznych. Mechanik, 87.
• 7. Mielck, A., Kilian, H., Lehmann, F., Richter-Kornweitz, A., and Kaba-Schönstein, L. (2016). German cooperation-network ‘equity in health’—health promotion in settings. Health Promotion International.
• 8. Sęp, J. and Budzik, G. (2015). Możliwości aplikacyjne technologii rapid manufacturing w przemyśle lotniczym. Mechanik, 88.
• 9. Venuvinod, P. K. and Ma, W. (2013). Rapid prototyping: laser-based and other technologies. Springer Science & Business Media.
• 10. Wichniarek, R. (2014). Badania wskaźników techniczno-ekonomicznych wyrobów wykonanych przyrostowo. Rozprawa doktorska, Poznań.