Modelling conveyor belt passage with a driving drum using finite element methods

• Autorzy: Mikušová N. , Milľo S.

Identyfikatory

DOI

10.12913/22998624/80311

• Języki publikacji: EN

Abstrakty

EN

Finite element methods are used in many disciplines for the development of products, typically in mechanical engineering (for example in automotive industry, biomechanics, etc.). Some modern programs of finite element methods have specific tools (electromagnetic, fluid and structural simulations). The finite elements methods allow detailed presentation of structures by bending or torsion, complete design, testing and optimization before the prototype production. The aims of this paper were model a conveyor belt passage with a driving drum. The model was created in Abaqus CAE program. The created model presented data about forces, pressures, and deformation of the conveyor belt.

Słowa kluczowe

EN

belt conveyor; belt; finite element method

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2017
• Tom: Vol. 11, no 4
• Strony: 239--246
• Opis fizyczny: Bibliogr. 20 poz., fig.

Twórcy

autor

Mikušová N.

• Technical University of Kosice, Letna 9, 042 00 Kosice, Slovak Republic

autor

Milľo S.

• Technical University of Kosice, Letna 9, 042 00 Kosice, Slovak Republic

Bibliografia

• 1.Mantič M., Kuľka J., Krajňák J., Kopas M., Schneider M. Influence of selected digitization methods on final accuracy of 3D model. In: Majerník, M., Daneshjo, N., and Bosák, M. (eds.) Production Management and Engineering Sciences. pp. 475–480. CRC Press Taylor and Francis Group A Balkema Book, 2016.
• 2.Madáč K., Durkáč V., Kráľ J. Design of applications for CAD system Creo Parametric 1.0. Int. Sci. Her., 4, 2012, 278–284.
• 3.Strohmandl J. Use of simulation to reduction of faulty products. UPB Sci. Bull. Ser. D Mech. Eng., 76, 2014, 223–230.
• 4.Bukoveczky J., Gulan, L., Schmidtova, C. One method of mass classes creation demonstrated on excavators. In: Transport means 2014 : proceedings of the 18th international conference. pp. 397-400, 2014.
• 5.Honus, S., Bocko, P., Bouda, T., Ristović, I., Vulić, M.: The effect of the number of conveyor belt carrying idlers on the failure of an impact place: A failure analysis. Eng. Fail. Anal., 77, 2017, 93–101.
• 6.Debski H., Koszalka G., Ferdynus M. Application of FEM in the analysis of the structure of a trailer supporting frame with various operation parameters. Eksploatacja i Niezawodnosc – Maintenance and Reliability, 14, 2012, 107–113.
• 7.Molnár, V., Fedorko, G., Stehlíková, B., Tomašková, M., Hulínová, Z., Analysis of asymmetrical effect of tension forces in conveyor belt on the idler roll contact forces in the idler housing, Meas. J. Int. Meas. Confed. 52 (2014) 22–32. doi:10.1016/j.measurement.2014.02.035.
• 8.Molnár, V., Fedorko, G., Stehlíková, B., Michalik, P., Weiszer, M., A regression model for prediction of pipe conveyor belt contact forces on idler rolls, Meas. J. Int. Meas. Confed. 46 (2013) 3910–3917. doi:10.1016/j.measurement.2013.07.045.
• 9.Molnár, V., Fedorko, G., Stehlíková, B., Michalik, P., Kopas, M., Mathematical models for indirect measurement of contact forces in hexagonal idler housing of pipe conveyor, Meas. J. Int. Meas. Confed. 47 (2014) 794–803. doi:10.1016/j.measurement.2013.10.012.
• 10.Rozbroj J., Zegzulka J., Nečas J. Use of DEM in the Determination of Friction Parameters on a Physical Comparative Model of a Vertical Screw Conveyor. Chem. Biochem. Eng. Q., 29, 2015, 25–34.
• 11.Neradilová, H., Laskovsky, V., The use of ecological systems for transporting of raw materials in the Czech Republic. In: 16th International Multidisciplinary Scientific GeoConference SGEM 2016. pp. 943-950, 2016.
• 12.Zienkiewicz, O.C.; Taylor, R.L.; Zhu, J.Z. (2005). The Finite Element Method: Its Basis and Fundamentals (Sixth ed.). Butterworth-Heinemann. ISBN 0750663200
• 13.Gajdos I., Slota J., Spisak E., Jachowicz T. and Tor-Swiatek A. Structure and tensile properties evaluation of samples produced by Fused Deposition Modeling. Open Eng., 6, 2016, 86–89.
• 14.ABAQUS/Explicit,Version 6.9-1. Simulia documentation for the Abaqus Unified FEA product suite. T. , Providence, 2009.
• 15.Lodewijks G. On the application of beam elements in Finite Element models of belt conveyors. Part II. Bulk Solids Handling, 15 (1995), pp. 571-591
• 16.Lodewijks G. On the application of beam elements in Finite Element models of belt conveyors. Part I. Bulk Solids Handling, 14 (1994), pp. 729-737
• 17.Lodewijks G. On the application of beam elements in Finite Element models of belt conveyors. Part II. Bulk Solids Handling, 15 (1995), pp. 571-591
• 18.Mazurkiewicz M. Problems of identification of strength properties of rubber materials for purposes of numerical analysis: a review. Arch Civil Mech Eng, X (2010), pp. 1-16
• 19.Bukoveczky J., Gulan, L., Schmidtova, C. One method of mass classes creation demonstrated on excavators. In: Transport means 2014 : proceedings of the 18th international conference. pp. 397-400, 2014.
• 20.Palenčár R., Ďuriš, S., Dovica, M., Palenčár, J. Application of Monte Carlo method for evaluation of uncertainties of temperature measurement by SPRT. In: IMEKO 21 World Congress. pp. 1-6, 2015.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)