The Influence of the Form Deviations of Sleeve-Shaft Couple on the Variation of Frictional Resistance in a Connection

• Autorzy: Dudziak M. , Kołodziej A.
• Języki publikacji: EN

Abstrakty

EN

The frictional capacity of service load transmission is defined for the nominal mating surfaces in machine units which are constructed of elements with form deviations. Variable profile of elements obtained during production is the reason of variable values of frictional resistance which are caused by the limited (actual) contact in a connection. The paper presents the test stand for the measurement of the force and moment of friction of sleeve-shaft couple. The sleeve was connected with special shafts which were manufactured intentionally with radial deviations, cross-section deviations and their compilations. The experimental investigations were performed in order to determine the influence of the form deviations and angular positions of the shaft on the value of axial friction force (during shaft translation) and moment of friction (during shaft rotation).

Słowa kluczowe

EN

form deviations; friction force; moment of friction

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Research
• Rocznik: 2014
• Tom: Vol. 38, No. 4
• Strony: 15--22
• Opis fizyczny: Bibliogr. 4 poz., il.

Twórcy

autor

Dudziak M.

• Chair of Mechanics and Mechanical Engineering, The President Stanisław Wojciechowski Higher Vocational State School in Kalisz

autor

Kołodziej A.

• Chair of Mechanics and Mechanical Engineering, The President Stanisław Wojciechowski Higher Vocational State School in Kalisz

Bibliografia

• 1. Adamczak, S., 2008, Geometrical measurements of surface (original title in Polish: Pomiary geometryczne powierzchni), WNT, Warszawa.
• 2. Dudziak, M., Kołodziej, A., 2009, Qualitative aspects of manufacturing of joints in advanced constructions (an example of automotive and aircraft industry), Studium Vilnense A, Vilnius, vol. 5, p. 57-59.
• 3. Humienny Z., 2004, Geometrical Product Specification (original title in Polish: Specyfikacja geometrii wyrobów), WNT, Warszawa.
• 4. Ratajczyk E., 2005, Coordinate Measuring Technique (original title in Polish: Współrzędnościowa Technika Pomiarowa), Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa.