Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Carbon nanotubes (CNTs) are a good reinforcement for metal matrix composite materials; they can significantly improve the mechanical, wear-resistant, and heat-resistant properties of the materials. Due to the differences in the atomic structure and surface energy between CNTs and aluminum-based materials, the bonding interface effect that occurs when nanoscale CNTs are added to the aluminum alloy system as a reinforcement becomes more pronounced, and the bonding interface is important for the material mechanical performance. Firstly, a comparative analysis of the interface connection methods of four CNT-reinforced aluminum matrix composites is provided, and the combination mechanisms of various interface connection methods are explained. Secondly, the influence of several factors, including the preparation method and process as well as the state of the material, on the material bonding interface during the composite preparation process is analyzed. Furthermore, it is explained how the state of the bonding interface can be optimized by adopting appropriate technical and technological means. Through the study of the interface of CNT-reinforced aluminum-based composite materials, the influence of the interface on the overall performance of the composite material is determined, which provides directions and ideas for the preparation of future high-performance CNT-reinforced aluminum-based composite materials.
Czasopismo
Rocznik
Tom
Strony
23--36
Opis fizyczny
Bibliogr. 88 poz., fot., rys.
Twórcy
autor
- School of Mechanical & Electrical Engineering Guizhou Normal University, Guiyang, China
autor
- School of Mechanical & Electrical Engineering Guizhou Normal University, Guiyang, China
autor
- Guiyang Huaheng Mechanical Manufacture CO.LTD, Guyiang, China
autor
- School of Mechanical & Electrical Engineering Guizhou Normal University, Guyiang, China
Bibliografia
- [1] Shao, H.Q. & Li, Q. J. (2020). Effect of stirring casting process parameters on properties of aluminum matrix composites for mechanical shield. Hot Working Technology. 23, 67-69+75.
- [2] Krishna, A.R., Arun, A., Unnikrishnan, D. & Shankar. K.V. (2018). An investigation on the mechanical and tribological properties of alloy A356 on the addition of WC. Materials Today: Proceedings. 5(5), 12349-12355. DOI:10.1016/j.matpr.2018.02.213.
- [3] Joseph, J., Pillai, B.S., Jayanandan, J., Jayagopan, J., Nivedh, S., Balaji, U.S.S. & Shankar, K.V. (2021). Mechanical behaviour of age hardened A356/TiC metal matrix composite. Materials Today: Proceedings. 38, 2127-2132. DOI:10.1016/j.matpr.2020.05.013.
- [4] Kumar, V.A., Kumar, V.V.V., Menon, G.S., Bimaldev, S., Sankar, M., Shankar, K.V. & Balachandran, M. (2020). Analyzing the effect of B4C/Al2O3 on the wear behavior of Al-6.6Si-0.4Mg alloy using response surface methodology. International Journal of Surface Engineering and Interdisciplinary Materials Science. 8(2). 66-79. DOI:10.4018/ijseims.2020070105.
- [5] Anilkumar, V., Shankar, K.V., Balachandran, M., Joseph, J., Nived, S., Jayanandan, J., Jayagopan, J. & Surya Balaji, U.S. (2021). Impact of heat treatment analysis on the wear behaviour of Al-14.2Si-0.3Mg-TiC composite using response surface methodology. Tribology in industry. 43(3), 590-602. DOI: 10.24874/ti.988.10.20.04.
- [6] Zhao, S., Liu, Z., &.Zhang, X. B. (2006). Technical process and mechanical properties of carbon nanotubes reinforced aluminium matrix composites. Foundry Technology. 2, 135- 138.
- [7] Nam, D.H., Cha, S.I., Lim, B.K,, Park, H.M., Han, D.S. & Hong, S.H. (2012). Synergistic strengthening by load transfer mechanism and grain refinement of CNT/Al–Cu composites. Carbon. 50(7), 2417-2423. DOI:10.1016/j.carbon. 2012.01.058.
- [8] Sun, Y.G., Liu, P., Chen, X.H., Liu, X.K., Li, W., Ma, F.C. & He, D,H. (2012). Present situation of carbon nano-tube reinforced aluminum composite. Material & Heat Treatment. 41(24), 137-139+144.
- [9] Bakshi, S.R. & Agarwal, A. (2011). An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites. Carbon. 49(2), 533-544. DOI:10.1016/j.carbon.2010.09.054.
- [10] Nai, M.H., Wei, J. & Gupta, M. (2014). Interface tailoring to enhance mechanical properties of carbon nanotube reinforced magnesium composites. Materials & Design. 60, 490-495. DOI:10.1016/j.matdes.2014.04.011.
- [11] Fan, T.X., Liu, Y., Yang, K.M., Song, J. & Zhang, D. (2019). Research progress on the optimization of the interface structure of carbon/metal composites and the interface mechanism. Acta Metall Sinica. 55(1), 16-32.
- [12] Cao, L., Chen, B., Guo, B.S. & Li, J.S. (2021). A review of carbon nanotube dispersion methods in carbon nanotube reinforced aluminium matrix composites manufacturing process. Journal of Netshape Forming Engineering. 13(3), 9- 24. DOI:10.3969/j.issn.1674-6457.2021.03.002.
- [13] Chen, B., Li, S., Imai, H., Jia, L., Umeda, J., Takahashi, M. & Kondoh, K. (2015). Load transfer strengthening in carbon nanotubes reinforced metal matrix composites via in-situ tensile tests. Composites Science and Technology. 113, 1-8. DOI:10.1016/j.compscitech.2015.03.009.
- [14] Pérez-Bustamante, R., Pérez-Bustamante, F., Estrada-Guel, I., Licea-Jiménez, L., Miki-Yoshida, M. & Martínez-Sánchez, R. (2013). Effect of milling time and CNT concentration on hardness of CNT/Al2024 composites produced by mechanical alloying. Materials Characterization. 75, 13-19. DOI:10.1016/j.matchar.2012.09.005.
- [15] Shi, G. (2012). The study of coated carbon nanotube and reinforced magnesium matrix composites. Lanzhou University Of Technolofy, Lanzhou,China.
- [16] Aravind Senan, V.R., Anandakrishnan, G., Rahul, S.R., Reghunath, N. & Shankar, K.V. (2020). An investigation on the impact of SiC/B4C on the mechanical properties of Al 6.6Si-0.4Mg alloy. Materials Today: Proceedings. 26, 649- 653. DOI:10.1016/j.matpr.2019.12.359.
- [17] Rohith, K.P., Sajay Rajan, E., Harilal, H., Jose, K. & Shankar, K.V. (2018).Study and comparison of A356-WC composite and A356 alloy for an off-road vehicle chassis. Materials Today: Proceedings. 5(11), 25649-25656. DOI:10.1016/j.matpr.2018.11.006.
- [18] Jiang, L., Wen, H., Yang, H., Hu, T., Topping, T., Zhang, D., Lavernia, E.J. & Schoenung, J.M. (2015). Influence of length scales on spatial distribution and interfacial characteristics of B4C in a nanostructured Al matrix. Acta Materialia. 89, 327- 343. DOI:10.1016/j.actamat.2015.01.062.
- [19] Aravind Senan, V.R., Akshay, M.C., & Shankar, K.V. (2019). Determination on the effect of Al2O3 / B4B on the mechanical behaviour of al-6.6si-0.5mg alloy cast in permanent mould. Materials Science Forum. 969, 398-403. DOI:10.4028/ www.scientific.net/MSF.969.398.
- [20] Truong. H.T.X., Lagoudas, D,C., Ochoa, O.O. & Lafdi, K. (2013). Fracture toughness of fiber metal laminates: Carbon nanotube modified Ti–polymer–matrix composite interface. Journal of Composite Materials. 48(22), 2697-2710. DOI:10.1177/0021998313501923.
- [21] Trinh, P,V., Luan, N.V., Phuong, D.D., Minh. P. N., Weibel, A., Mesguich, D. & Laurent, C. (2018) Microstructure, microhardness and thermal expansion of CNT/Al composites prepared by flake powder metallurgy. Composites Part A: Applied Science and Manufacturing. 105, 126-137. DOI:10.1016/j.compositesa.2017.11.022.
- [22] Laha, T., Chen, Y., Lahiri, D. & Agarwal, A. (2009). Tensile properties of carbon nanotube reinforced aluminum nanocomposite fabricated by plasma spray forming. Composites Part A: Applied Science and Manufacturing. 40(5), 589-594. DOI:10.1016/j.compositesa.2009.02.007.
- [23] Bakshi, S.R., Singh, V., Seal, S. & Agarwal, A. (2009). Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spraying of spray dried powders. Surface and Coatings Technology. 203(10-11), 1544-1554. DOI:10.1016/j.surfcoat.2008.12.004.
- [24] Liu, Z.Y., Xiao, B.L., Wang, W.G. & Ma, Z.Y. (2013). Developing high-performance aluminum matrix composites with directionally aligned carbon nanotubes by combining friction stir processing and subsequent rolling. Carbon. 62, 35-42. DOI:10.1016/j.carbon.2013.05.049.
- [25] Yang, X., Liu, E., Shi, C., He, C., Li, J., Zhao, N. & Kondoh, K. (2013). Fabrication of carbon nanotube reinforced Al composites with well-balanced strength and ductility. Journal of Alloys and Compounds. 563, 216-220. DOI:10.1016/j.jallcom.2013.02.066.
- [26] Gao, M., Gao, P., Wang, Y., Lei, T. & Ouyang. C. (2020). Study on metallurgically prepared copper-coated carbon fibers reinforced aluminum matrix composites. Metals and Materials International. 12. DOI:10.1007/s12540-020- 00897-1.
- [27] Li, S., Su, Y., Zhu, X., Jin, H., Ouyang, Q. & Zhang, D. (2016). Enhanced mechanical behavior and fabrication of silicon carbide particles covered by in-situ carbon nanotube reinforced 6061 aluminum matrix composites. Materials & Design. 107, 130-138. DOI:10.1016/j.matdes.2016.06.021.
- [28] Mansoor, M., Khan, S., Ali, A. & Ghauri, K.M. (2019). Fabrication of aluminum-carbon nanotube nano-composite using aluminum-coated carbon nanotube precursor. Journal of Composite Materials. 53(28-30), 4055-4064. DOI:10.1177/0021998319853341.
- [29] Kucukyildirim, B.O. & Eker, A.A. (2012). Fabrication and mechanical properties of CNT/6063Al composites prepared by vacuum assisted infiltration technique using CNT-Al preforms. Advanced Composites Letters. 133(1), 125-130.
- [30] Kang, K., Bae, G., Kim, B. & Lee, C. (2012). Thermally activated reactions of multi-walled carbon nanotubes reinforced aluminum matrix composite during the thermal spray consolidation. Materials Chemistry and Physics. 133(1), 495-499. DOI:10.1016/j.matchemphys.2012.01.071.
- [31] Isaza, M.C.A., Ledezma Sillas, J.E., Meza, J.M. & Herrera Ramírez, J.M. (2016). Mechanical properties and interfacial phenomena in aluminum reinforced with carbon nanotubes manufactured by the sandwich technique. Journal of Composite Materials. 51(11), 1619-1629. DOI:10.1177/0021998316658784.
- [32] Kurita, H., Estili, M., Kwon, H., Miyazaki, T., Zhou, W., Silvain, J-F. & Kawasaki, A. (2015). Load-bearing contribution of multi-walled carbon nanotubes on tensile response of aluminum. Composites Part A: Applied Science and Manufacturing. 68, 133-139. DOI:10.1016/j.compositesa.2014.09.014.
- [33] Shin, S.E. & Bae, D.H. (2013). Strengthening behavior of chopped multi-walled carbon nanotube reinforced aluminum matrix composites. Materials Characterization. 83, 170-177. DOI:10.1016/j.matchar.2013.05.018.
- [34] Zhou, W., Bang, S., Kurita, H., Miyazaki, T., Fan, Y. & Kawasaki, A. (2016). Interface and interfacial reactions in multi-walled carbon nanotube-reinforced aluminum matrix composites. Carbon. 96, 919-928. DOI:10.1016/j.carbon. 2015.10.016.
- [35] Liu, Z.Y., Xiao, B.L., Wang, W.G. & Ma, Z.Y. (2012). Singly dispersed carbon nanotube/aluminum composites fabricated by powder metallurgy combined with friction stir processing. Carbon. 50(5), 1843-1852. DOI:10.1016/j.carbon. 2011.12.034.
- [36] Li, Z.W., Lin, R.B., Hu, L., Yu, Z.Y., Yan, L.P., Tan, Z.Q., Fan, G.L., Li, Z.Q. & Zhang, D. (2017). CNTs/Al interfacial reaction degree and the relationship with mechanical performance of composite. Materials For Mechanical Engineering. 41(11), 19-22+28. DOI:10.11973/jxgcc 1201711003.
- [37] Zhang, X.X., Wei, H.M., Li, A.B., Fu, Y.D. & Geng, L. (2013). Effect of hot extrusion and heat treatment on CNTs – Al interfacial bond strength in hybrid aluminium composites. Composite Interfaces. 20(4), 231-239. DOI:10.1080/ 15685543.2013.793093.
- [38] Wu, G. H., Jiang, L.T., Chen, G.Q. & Zhang, Q. (2012). Research progress on the control of interfacial reactions in metal matrix composites. Materials China. 31(7), 51-58. DOI:CNKI:SUN:XJKB.0.2012-07-009.
- [39] Chen, B., Shen, J., Ye, X., Imai, H., Umeda, J., Takahashi, M. & Kondoh, K. (2017). Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites. Carbon. 114, 198-208. DOI:10.1016/j.carbon.2016.12.013.
- [40] Ci, L., Ryu, Z., Jin-Phillipp, N.Y. & Rühle, M. (2006). Investigation of the interfacial reaction between multi-walled carbon nanotubes and aluminum. Acta Materialia. 54(20), 5367-5375. DOI:10.1016/j.actamat.2006.06.031.
- [41] Jiang, L., Li, Z., Fan, G., Cao, L. & Zhang, D. (2012). Strong and ductile carbon nanotube/aluminum bulk nanolaminated composites with two-dimensional alignment of carbon nanotubes. Scripta Materialia. 66(6), 331-334. DOI:10.1016/j.scriptamat.2011.11.023.
- [42] Xu, S.J., Xiao, B.L., Liu, Z.Y., Wang, W.G. & Ma, Z.Y. (2012). Micorstrures and mechanical properties of CNT/Al conposites fabricated by high energy ball-milling method. Acta Metallurgica Sinica. 48(7), 882-888. DOI:10.3724/SP.J.1037.2012.00140.
- [43] Raviathul Basariya, M., Srivastava, V.C. & Mukhopadhyay, N.K. (2014). Microstructural characteristics and mechanical properties of carbon nanotube reinforced aluminum alloy composites produced by ball milling. Materials & Design. 64, 542-549. DOI:10.1016/j.matdes.2014.08.019.
- [44] Yoo, S.J., Han, S.H. & Kim, W.J. (2013). Strength and strain hardening of aluminum matrix composites with randomly dispersed nanometer-length fragmented carbon nanotubes. Scripta Materialia. 68(9), 711-714. DOI:10.1016/j.scriptamat.2013.01.013.
- [45] Le, G., Cai, X.L., Wang, K.J., Wang, X.F., Sun, H.P. & Chen, Y,G. (2013). Experimental study on interfacial reaction of CNTs/Al matrix composites. Mining And Metallurgical Engineering. 33(1), 109-112. DOI:10.3969/j.issn.0253- 6099.2013.01.027.
- [46] Majid, M., Majzoobi, G.H., Noozad, G.A., Reihani, A., Mortazavi, S.Z. & Gorji, M.S. (2012). Fabrication and mechanical properties of MWCNTs-reinforced aluminum composites by hot extrusion. Rare Metals. 31(4), 372-378. DOI:10.1007/s12598-012-0523-6.
- [47] Zhu, X., Zhao, Y.G., Wu, M., Wang, H.Y. & Jiang, Q.C. (2016), Effect of initial aluminum alloy particle size on the damage of carbon nanotubes during ball milling. Materials (Basel). 9(3), 173. DOI:10.3390/ma9030173.
- [48] Ji, W., Wang, W.J., Meng, F.D., Huang, J.J., Wu, Z.Q., He, W. & Wu, H. (2021), Study on interfacial bonding of aluminum matrix composites reinforced by carbon nanotubes with potassium fluoroaluminate. Hot Working Technology. 50(6), 71-74. DOI: 10.14158/j.cnki. 1001-3814. 20193526.
- [49] Esawi, A.M.K., Morsi, K., Sayed, A., Taher, M. & Lanka, S. (2010). Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites. Composites Science and Technology. 70(16), 2237-2241. DOI:10.1016/j.compscitech.2010.05.004.
- [50] Peng, T. & Chang, I. (2014). Mechanical alloying of multi walled carbon nanotubes reinforced aluminum composite powder. Powder Technology. 266, 7-15. DOI:10.1016/j.powtec.2014.05.068.
- [51] Kwon, H., Saarna, M., Yoon, S., Weidenkaff, A. & Leparoux, M. (2014). Effect of milling time on dual-nanoparticulate reinforced aluminum alloy matrix composite materials. Materials Science and Engineering: A. 590, 338-345. DOI:10.1016/j.msea.2013.10.046.
- [52] Tang, J.J, Li, C.J. & Zhu, X.K. (2012). Progress of the current interface research on carbon nanotubes reinforced Aluminum matrix composites. Materials Review. 26(11), 149-152. DOI:CNKI:SUN:CLDB.0.2012-11-033.
- [53] Li, J.R., Jiang, X.S., Liu, W.X., Li, X. & Zhu, D.G. (2015). Research progress of the interface characteristic and strengthening mechanism in carbon nanotube reinforced Aluminum matrix composites. Materials Review. 29(1), 31- 35+42. DOI:10.11896/j.issn.1005-023X.2015.01.005.
- [54] So, K.P., Lee, I.H., Duong, D.L., Kim, T.H., Lim, S.C., An, K.H. & Lee, Y.H. (2011). Improving the wettability of aluminum on carbon nanotubes. Acta Materialia. 59(9), 3313- 3320. DOI:10.1016/j.actamat.2011.01.061.
- [55] Zeng, M.Q. & Ou Yang, L. Z. (2002). Progress in research on interface of composite material. China Foundry Machinery & Technology. 6, 23-26. DOI:CNKI:SUN:ZZSB.0.2002-06-008.
- [56] Jiang, L., Fan, G., Li, Z., Kai, X., Zhang, D., Chen, Z., Humphries, S., Heness, G. & Yeung, W.Y. (2011). An approach to the uniform dispersion of a high volume fraction of carbon nanotubes in aluminum powder. Carbon. 49(6), 1965-1971. DOI:10.1016/j.carbon.2011.01.021.
- [57] Huang, Y., Ouyang, Q., Zhang, D., Zhu, J., Li, R. & Yu, H. (2014). Carbon materials reinforced aluminum composites: a review. Acta Metallurgica Sinica (English Letters). 27(5), 775-786. DOI:10.1007/s40195-014-0160-1.
- [58] So, K.P., Biswas, C., Lim, S.C., An, K.H. & Lee, Y.H. (2011). Electroplating formation of Al–C covalent bonds on multiwalled carbon nanotubes. Synthetic Metals. 161(3-4), 208-212. DOI:10.1016/j.synthmet.2010.10.023.
- [59] Arai, S., Suzuki, Y., Nakagawa, J., Yamamoto, T. & Endo, M. (2012). Fabrication of metal coated carbon nanotubes by electroless deposition for improved wettability with molten aluminum. Surface and Coatings Technology. 212, 207-213. DOI:10.1016/j.surfcoat.2012.09.051.
- [60] Jagannatham, M., Sankaran, S. & Haridoss, P. (2015). Microstructure and mechanical behavior of copper coated multiwall carbon nanotubes reinforced aluminum composites. Materials Science and Engineering: A. 638, 197-207. DOI:10.1016/j.msea.2015.04.070.
- [61] So, K.P., Jeong, J.C., Park, J.G., Park, H.K., Choi, Y.H., Noh, D.H., Keum, D.H., Jeong, H.Y., Biswas, C., Hong, C.H. & Lee, Y,H. (2013). SiC formation on carbon nanotube surface for improving wettability with aluminum. Composites Science and Technology. 74, 6-13. DOI:10.1016/j.compscitech. 2012.09.014.
- [62] Wang, H. & Zhu, Y.L. (2019). Pretreatment and copper plating of carbon nanotubes by electroless deposition. Surface Technology. 48(11), 211-218. DOI:10.16490/j.cnki.issn. 1001-3660.2019.11.022.
- [63] Lahiri, D., Bakshi, S.R., Keshri, A.K., Liu, Y. & Agarwal. A. (2009). Dual strengthening mechanisms induced by carbon nanotubes in roll bonded aluminum composites. Materials Science and Engineering: A. 523(1-2), 263-270. DOI:10.1016/j.msea.2009.06.006.
- [64] Liu, B., Deng, F.M. & Qu, J.X. (2003). Design and research of carbon nanotubes reinforced aluminum matrix composite. Ordnance Material Science and Engineering. 6, 54-57+69. DOI:10.14024/j.cnki.1004-244x.2003.06.016.
- [65] Zheng, Q.W. & Fan, T.X. (2022). Experimental and simulation methods on liquid/solid interface wettability considering crystal surfaces. Materials Reports. 9, 1-23.
- [66] Han, X.D., Li, Z.Q., Fan, G.L., Jiang, L. & Zhang, D. (2012). Progress in fabrication technique of carbon nanotubes reinforced Al matrix composites. Materials Reports. 26(21), 40-46.DOI:CNKI:SUN:CLDB.0.2012-21-010.
- [67] Oh, S-I., Lim, J-Y., Kim, Y-C., Yoon, J., Kim, G-H., Lee, J., Sung, Y-M. & Han, J-H. (2012). Fabrication of carbon nanofiber reinforced aluminum alloy nanocomposites by a liquid process. Journal of Alloys and Compounds. 542, 111- 117. DOI:10.1016/j.jallcom.2012.07.029.
- [68] Bi, S., Xiao, B.L., Ji, Z.H., Liu, B.S., Liu, Z.Y. & Ma, Z.Y. (2020). Dispersion and damage of carbon nanotubes in carbon nanotube/7055Al composites during high-energy ball milling process. Acta Metallurgica Sinica (English Letters). 34(2), 196-204. DOI:10.1007/s40195-020-01138-5.
- [69] Guo, B., Zhang, X., Cen, X., Wang, X., Song, M., Ni, S., Yi, J., Shen, T. & Du, Y. (2018). Ameliorated mechanical and thermal properties of SiC reinforced Al matrix composites through hybridizing carbon nanotubes. Materials Characterization. 136, 272-280. DOI:10.1016/j.matchar. 2017.12.032.
- [70] Aristizabal, K., Katzensteiner, A., Bachmaier, A., Mücklich, F. & Suarez, S. (2017). Study of the structural defects on carbon nanotubes in metal matrix composites processed by severe plastic deformation. Carbon. 125, 156-161. DOI:10.1016/j.carbon.2017.09.075.
- [71] Li, H., Kang, J., He, C., Zhao, N., Liang, C. & Li, B. (2013). Mechanical properties and interfacial analysis of aluminum matrix composites reinforced by carbon nanotubes with diverse structures. Materials Science and Engineering: A. 577, 120-124. DOI:10.1016/j.msea.2013.04.035.
- [72] Serp, P. & Castillejos, E. (2010). Catalysis in carbon nanotubes. ChemCatChem. 2(1), 41-47. DOI:10.1002/cctc.200900283.
- [73] Liyong, T., Xiannian, S. & Ping, T. (2008). Effect of long multi-walled carbon nanotubes on delamination toughness of laminated composites. Journal of Composite Materials. 42(1), 5-23. DOI:10.1177/0021998307086186.
- [74] Wang, L., Choi, H., Myoung, J-M. & Lee, W. (2009). Mechanical alloying of multi-walled carbon nanotubes and aluminium powders for the preparation of carbon/metal composites. Carbon. 47(15), 3427-3433. DOI:10.1016/j.carbon.2009.08.007.
- [75] Esawi, A.M.K., Morsi, K., Sayed, A., Taher, M. & Lanka, S. (2011). The influence of carbon nanotube (CNT) morphology and diameter on the processing and properties of CNT reinforced aluminium composites. Composites Part A: Applied Science and Manufacturing. 42(3), 234-243. DOI:10.1016/j.compositesa.2010.11.008.
- [76] Hassan, M.T.Z., Esawi, A.M.K. & Metwalli, S. (2014). Effect of carbon nanotube damage on the mechanical properties of aluminium–carbon nanotube composites. Journal of Alloys and Compounds. 607, 215-222. DOI:10.1016/j.jallcom.2014.03.174.
- [77] Jiang, J.L., Zhao, S.J., Yang, H. & Li, W. X. (2008). Mechanical properties of Al matrix composites reinforced with carbon nanotubes prepared by powdermetallurgy. Transactions Of Materials And Heat Treatment. 3, 6-9. DOI:10.13289/j.issn.1009-6264.2008.03.002.
- [78] Liao, J-Z., Tan, M-J. & Sridhar, I. (2010). Spark plasma sintered multi-wall carbon nanotube reinforced aluminum matrix composites. Materials & Design. 31, S96-S100. DOI:10.1016/j.matdes.2009.10.022.
- [79] Chen, B., Imai, H., Umeda, J., Takahashi, M. & Kondoh, K. (2017). Effect of spark-plasma-sintering conditions on tensile properties of aluminum matrix composites reinforced with multiwalled carbon nanotubes (MWCNTs). Jom. 69(4), 669- 675. DOI:10.1007/s11837-017-2263-4.
- [80] Choi, H.J., Shin, J.H. & Bae, D. H. (2011). Grain size effect on the strengthening behavior of aluminum-based composites containing multi-walled carbon nanotubes. Composites Science and Technology. 71(15), 1699-1705. DOI:10.1016/j.compscitech.2011.07.013.
- [81] Etter, T., Schulz, P., Weber, M., Metz, J., Wimmler, M., Löffler, J.F. & Uggowitzer, P.J. (2007). Aluminium carbide formation in interpenetrating graphite/aluminium composites. Materials Science and Engineering: A. 448(1-2), 1-6. DOI:10.1016/j.msea.2006.11.088.
- [82] Huang, Y.P., Li, D.H. & Huang, W. (2004), Preparation and property of pure AMC reinforced by CNTs. New technology and new process. 12, 48-49. DOI:CNKI:SUN:XJXG.0.2004- 12-021.
- [83] Aborkin, A., Khorkov, K., Prusov, E., Ob'edkov, A., Kremlev, K., Perezhogin, I. & Alymov, M. (2019). Effect of increasing the strength of aluminum matrix nanocomposites reinforced with microadditions of multiwalled carbon nanotubes coated with TiC nanoparticles. Nanomaterials (Basel). 9(11), 1596. DOI:10.3390/nano9111596.
- [84] Zhou, W., Sasaki, S. & Kawasaki, A. (2014). Effective control of nanodefects in multiwalled carbon nanotubes by acid treatment. Carbon. 78, 121-129. DOI:10.1016/j.carbon.2014.06.055.
- [85] Wang, L., Ge, L., Rufford, T.E., Chen, J., Zhou, W., Zhu, Z. & Rudolph, V. (2011). A comparison study of catalytic oxidation and acid oxidation to prepare carbon nanotubes for filling with Ru nanoparticles. Carbon. 49(6), 2022-2032. DOI:10.1016/j.carbon.2011.01.028.
- [86] Kim, K.T., Cha, S.I., Gemming, T., Eckert, J. & Hong, S.H. (2008). The role of interfacial oxygen atoms in the enhanced mechanical properties of carbon-nanotube-reinforced metal matrix nanocomposites. Small. 4(11), 1936-1940. DOI:10.1002/smll.200701223.
- [87] Liao, J. & Tan, M-J. (2011). Mixing of carbon nanotubes (CNTs) and aluminum powder for powder metallurgy use. Powder Technology. 208(1), 42-48. DOI:10.1016/ j.powtec.2010.12.001.
- [88] Fan, B.B., Wang, B.B., Chen, H., Wang, G.J. & Zhang, Y. (2013). Preparation and properties of carbon CNTs/Al matrix composites. Journal of Shenyang University (Natural Science). 25(2), 128-131. DOI:CNKI:SUN:SYDA.0.2013- 02-011.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-11a9f498-f5ee-4d8f-8adc-259c82c9c24e