Parametric optimization of dissimilar delding of AISI 409 ferritic stainless steel to AISI 316L austenitic stainless steel by using PCA method

• Autorzy: Ghosh N. , Kumar P. , Nandi G.
• Języki publikacji: EN

Abstrakty

EN

Purpose: Taguchi design has been adopted in order to identify optimal parametric combination for desired quality of weld. Microscopy was conducted to study the effect of welding input process parameters (welding current, gas flow rate and nozzle to plate distance) on MIG weld microstructures of AISI 409 ferritic stainless steel and AISI 316L austenitic stainless steel. Design/methodology/approach: A plan of experiments based on Taguchi technique has been used. Findings: The present work is planned to investigate some perspectives of GMAW dissimilar joints between AISI 409, a ferritic stainless steel and AISI 316L a austenitic stainless steel. Research limitations/implications: The main objective of the present study was to apply the Taguchi method to establish the optimal set of control parameters for the welding. The Taguchi method is employed to determine the optimal combination of design parameters, including: current, gas flow rate and nozzle to plate distance. the observed data have been interpreted, discussed and analyzed by considering yield strength , ultimate tensile strength and percentage of elongation combined with use of principal component analyses (pca) method. Practical implications: Dissimilar welding is the joining between two different materials by any welding process. Dissimilar weld has made considerable attention in many fields, such as in ship industries and nuclear power plant. Originality/value: The result computed is in form of contribution from each parameter, through which optimal parameters are identified for maximum tensile strength and percentage elongation. This paper presents new results of optimization using principal component analyses.

Słowa kluczowe

EN

optimization; dissimilar mig welding; AISI 316L austenitic stainless steel; AISI 409 ferritic stainless steel; X-ray radiographic test; tensile test

PL

optymalizacja; spawanie MIG; stal nierdzewna AISI 316L; ferrytyczna stal nierdzewna; badania radiologiczne; próba rozciągania

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2016
• Tom: Vol. 75, nr 1
• Strony: 24--33
• Opis fizyczny: Bibliogr. 13 poz., rys., tab.

Twórcy

autor

Ghosh N.

• Mechanical Engineering Department, Jadavpur University, Kolkata 700032, W.B, India

autor

Kumar P.

• Mechanical Engineering Department, Jadavpur University, Kolkata 700032, W.B, India

autor

Nandi G.

• Mechanical Engineering Department, Jadavpur University, Kolkata 700032, W.B, India

Bibliografia

• [1] C. Rakesh, P. Riddhish, I. Asha, Reliability of dissimilar metal jointsusingfusionwelding: a review, Proceedings of the International Conference on Machine Learning, Electrical and Mechanical Engineering, Dubai (UAE), 2014.
• [2] E. Taban, E. Deleu, A. Dhooge, E. Kaluc, Evaluation of DissimilarWeldsbetweenFerriticStainless Steel Modified 12% Cr and Carbon Steel S355, American WeldingSociety and the WeldingResearchJournal 8 (2012) 291-297.
• [3] J.K. Kim, S.G. Hong, K.B. Kang, C.Y. Kang, Microstructure and high temperatureproperties of the dissimilarweldbetweenferriticstainlesssteel and carbonsteel, Metals and Materials International 15/5 (2009) 843-849.
• [4] H. Tasalloti, P. Kah, J. Martikainen, Effects of weldingwire and torchweaving on GMAW of S355MC and AISI 304L dissimilarwelds, International Journal of Advanced Manufacturing Technology 71 (2014) 197-205.
• [5] L.S. Rosado, T.G. Santos, M. Piedade, P.M. Ramos, P. Vilaca, Advanced technique for non-destructivetesting of frictionstirwelding of metals, Journal of Measurement 43 (2010) 1021-1030.
• [6] P.S Rao, O.P. Gupta, S.N. Murty, A.B.K. Rao, Effect of processparameters and mathematical model for the prediction of bead geometry in pulsed GMA welding, International Journal of Advanced Manufacturing Technology 45/5-6 (2009) 496-505.
• [7] R.S. Parmar, WeldingProcesses and Technology, Second Edition, Khanna Publications, New Delhi, 1997.
• [8] O.P. Khanna, Welding Technology, Dhanpat Rai & Sons, 1986.
• [9] A. Ghosh, A.K. Mallik, Manufacturing Science, East-West Press Private Limited, NewDelhi, 2008.
• [10] R.L. Little, Welding and Welding Technology, McGraw Hill Book Company, New York, 1973.
• [11] B, Hu, R. Yu, H. Zou, Magnetic non-destructivetestingmethods for thin-plates aluminium alloys, NDT&E International 47 (2012) 66-69.
• [12] R. Yilmaz, H. Uzun, Mechanicalproperties of austeniticstainlesssteelswelded by GMAW and GTAW, Journal of Marmara for Pure and Applied Sciences 18 (2002) 97-113.
• [13] N. Murugan, R.S. Parmar, Effects of MIG processparameters on the geometry of the bead in the automatic surfacing of stainlesssteel, Journal of Materials Processing 41/4 (1994) 381-398.