Elastomery o właściwościach biobójczych. Cz. 1. Przegląd literaturowy

Dąbrowski, Kazimierz; Pawłowska, Urszula; Dębek, Cezary

doi:10.14314/polimery.2019.6.1

Artykuł - szczegóły

Tytuł artykułu

Elastomery o właściwościach biobójczych. Cz. 1. Przegląd literaturowy

Autorzy

Dąbrowski Kazimierz , Pawłowska Urszula , Dębek Cezary

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

DOI

10.14314/polimery.2019.6.1

Warianty tytułu

Elastomers with biocidal properties. Part 1. Literature review

Języki publikacji

Abstrakty

Artykuł stanowi przegląd literaturowy dotyczący zastosowań elastomerów biobójczych w zapobieganiu infekcjom. Opisano przyczyny infekcji bakteryjnych, zwłaszcza wywoływanych przez bakterie wielooporne, a także sposoby im zapobiegania. Scharakteryzowano stosowane rodzaje powłok biobójczych. Przedstawiono działanie elastomerów o właściwościach biobójczych, a także wymagania związane z technologią gumy, które musi spełniać substancja biobójcza stosowana w elastomerach.

The article is a review of the literature on the use of biocidal elastomers in the prevention of infections. The causes of bacterial infections, especially those induced by multi-resistant bacteria, as well as ways of preventing infections have been described. The types of commonly used biocidal coatings were characterized. Moreover, elastomers with biocidal properties and their effects have been described. The requirements related to the rubber technology, which must be met by a biocidal substance used in elastomers, were also presented.

Słowa kluczowe

elastomery biobójcze powłoki antybakteryjne bakterie wielooporne nanosrebro

biocidal elastomers antibacterial coatings multi-resistant bacteria nanosilver

Wydawca

Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej

Czasopismo

Polimery

Rocznik

2019

Tom

T. 64, nr 6

Strony

395--404

Opis fizyczny

Bibliogr. 148 poz.

Twórcy

autor

Dąbrowski Kazimierz

k.dabrowski@impib.pl

Instytut Inżynierii Materiałów Polimerowych i Barwników, Oddział Elastomerów i Technologii Gumy w Piastowie, ul. Harcerska 30, 05-820 Piastów

autor

Pawłowska Urszula

Instytut Inżynierii Materiałów Polimerowych i Barwników, Oddział Elastomerów i Technologii Gumy w Piastowie, ul. Harcerska 30, 05-820 Piastów

autor

Dębek Cezary

Instytut Inżynierii Materiałów Polimerowych i Barwników, Oddział Elastomerów i Technologii Gumy w Piastowie, ul. Harcerska 30, 05-820 Piastów

Bibliografia

[1] Davis C.P.: “Normal Flora” w “Medical Microbiology” (Ed. Baron S.), Fourth Edition, University of Texas Medical Branch at Galveston, Galveston, Texas 1996, ISBN 0963117211.
[2] Peterson J.W.: “Bacterial Pathogenesis” w “Medical Microbiology” (Ed. Baron S.), Fourth Edition, University of Texas Medical Branch at Galveston, Galveston, Texas 1996, ISBN 0963117211.
[3] Adlhart C., Verran J., Azevedo N.F. i in.: The Journal of Hospital Infection 2018, 99, 239. http://dx.doi.org/10.1016/j.jhin.2018.01.018
[4] Weber D.J., Rutala W.A.: American Journal of Infection Control 2013, 41, S31. http://dx.doi.org/10.1016/j.ajic.2012.12.005
[5] http://www.antybiotyki.edu.pl/pdf/sprawozdanie--NPOA.pdf (data dostępu 16.07.2018 r.)
[6] http://antybiotyki.edu.pl/pdf/NDM_Raport_I_kwartal_2017-05-07-1.pdf (data dostępu 16.07.2018 r.)
[7] NIK „Zakażenia w podmiotach leczniczych”, 2018. https://www.nik.gov.pl/kontrole/P/17/060/LBY/
[8] Salwiczek M., Qu Y., Gardiner J. i in.: Trends in Biotechnology 2014, 32, 82. http://dx.doi.org/10.1016/j.tibtech.2013.09.008
[9] “Biofilm-based Healthcare-associated Infections”, vol. II (Ed. Donelli G.), Springer, 2015, ISBN 9783319097817.
[10] “Antimicrobial Resistance. A Crisis in Health Care” (Eds. Calandra G.B., Mortensen J.E., Jungkind D.L., Fraimow H.S.), ISBN 9781475792034.
[11] Kramer A., Schwebke I., Kampf G.: BMC Infectious Diseases 2006, 6, 1. http://dx.doi.org/10.1186/1471-2334-6-130
[12] Campoccia D., Montanaro L., Arciola C.R.: Biomaterials 2013, 34, 8533. http://dx.doi.org/10.1016/j.biomaterials.2013.07.089
[13] Cloutier M., Mantovani D., Rosei F.: Trends in Biotechnology 2015, 33, 637. http://dx.doi.org/10.1016/j.tibtech.2015.09.002
[14] Lewis K., Klibanov A.M.: Trends in Biotechnology 2005, 23, 343. http://dx.doi.org/10.1016/j.tibtech.2005.05.004
[15] Huang K.S., Yang C.H., Huang S.L. i in.: International Journal of Molecular Sciences 2016, 17, 1578. http://dx.doi.org/10.3390/ijms17091578
[16] Hasan J., Crawford R.J., Ivanova E.P.: Trends in Biotechnology 2013, 31, 295. http://dx.doi.org/10.1016/j.tibtech.2013.01.017
[17] Alarfaj A.A., Lee H.H., Munusamy M.A. i in.: Journal of Polymer Engineering 2016, 36 (1), 1. http://dx.doi.org/10.1515/polyeng-2015-0046
[18] Siedenbiedel F., Tiller J.C.: Polymers 2012, 4, 46. http://dx.doi.org/10.3390/polym4010046
[19] Tiller J.C., Liao C.-L., Lewis K., Klibanov A.M.: Proceedings of the National Academy of Sciences of the United States of America 2001, 98, 5981. http://dx.doi.org/10.1073/pnas.111143098
[20] Kaur R., Liu S.: Progress in Surface Science 2016, 91, 136. http://dx.doi.org/10.1016/j.progsurf.2016.09.001
[21] Yu Q., Wu Z., Chen H.: Acta Biomaterialia 2015, 16, 1. http://dx.doi.org/10.1016/j.actbio.2015.01.018
[22] Murata H., Koepsel R.R., Matyjaszewski K., Russell A.J.: Biomaterials 2007, 28, 4870. http://dx.doi.org/10.1016/j.biomaterials.2007.06.012
[23] Santos M.R.E., Fonseca A.C., Mendonça P.V. i in.: Materials 2016, 9 (7), 599. http://dx.doi.org/10.3390/MA9070599
[24] Francolini I., Vuotto C., Piozzi A., Donelli G.: APMIS Journal of Pathology, Microbiology and Immunology 2017, 125, 392. http://dx.doi.org/10.1111/apm.12675
[25] Cioffi N., Torsi L., Ditaranto N.: Chemistry of Materials 2005, 17, 5255. http://dx.doi.org/10.1021/cm0505244
[26] Lyutakov O., Goncharova I., Rimpelova S. i in.: Materials Science and Engineering: C 2015, 49, 534. http://dx.doi.org/10.1016/j.msec.2015.01.022
[27] Palza H.: International Journal of Molecular Sciences 2015, 16, 2099. http://dx.doi.org/10.3390/ijms16012099
[28] Chylińska M., Kaczmarek H.: Polimery 2012, 57, 3. http://dx.doi.org/10.14314/polimery.2012.003
[29] Agarwal A., Weis T.L., Schurr M.J. i in.: Biomaterials 2010, 31, 680. http://dx.doi.org/10.1016/j.biomaterials.2009.09.092
[30] Wang L., Hu C., Shao L.: International Journal of Nanomedicine 2017, 12, 1227. http://dx.doi.org/10.2147/IJN.S121956
[31] Sütterlin S., Dahlö M., Tellgren-Roth C. i in.: Journal of Hospital Infection 2017, 96, 256. http://dx.doi.org/10.1016/j.jhin.2017.04.017
[32] de Lima e Silva A.A., Ribeiro de Carvalho M.A., de Souza S.A.L. i in.: Brazilian Journal of Microbiology 2012, 43, 1620. http://dx.doi.org/10.1590/S1517-83822012000400047
[33] Jakobsen L., Andersen A.S., Friis-Moller A. i in.: International Journal of Antimicrobial Agents 2011, 38, 454. http://dx.doi.org/10.1016/j.ijantimicag.2011.07.005
[34] Brühwasser C., Heinrich H., Lass-Flörl C., Mayr A.: Journal of Hospital Infection 2017, 97, 196. http://dx.doi.org/10.1016/j.jhin.2017.06.022
[35] Mulley G., Jenkins A.T.A., Waterfield N.R.: PLoS One 2014, 9, 2. http://dx.doi.org/10.1371/journal.pone.0094409
[36] Glinel K., Thebault P., Humblot V. i in.: Acta Biomaterialia 2012, 8, 1670. http://dx.doi.org/10.1016/j.actbio.2012.01.011
[37] Gottenbos B., van der Mei H.C., Klatter F. i in.: Biomaterials 2002, 23, 1417. http://dx.doi.org/10.1016/SO142-9612(01)00263-0
[38] Blackman I.C., Frank J.F., Frank F.: Journal of Food Protection 1996, 8, 827. http://dx.doi.org/10.4315/0362-028X-59.8.827
[39] Przybyłek M., Bakar M., Mendrycka M. i in.: Materials Science and Engineering: C 2017, 76, 269. http://dx.doi.org/10.1016/j.msec.2017.03.080
[40] Ronner A.B., Wong A.C.L.: Journal of Food Protection 1993, 56, 750. https://doi.org/10.4315/0362-028X-56.9.750
[41] Badawy H.T., Pasetto P., Mouget J.L. i in.: Biochemical and Biophysical Research Communications 2013, 438, 691. http://dx.doi.org/10.1016/j.bbrc.2013.07.120
[42] Badawy H., Brunelliere J., Veryaskina M. i in.: International Journal of Molecular Science 2015, 16, 4392. http://dx.doi.org/10.3390/ijmsl6034392
[43] Tomaszewska M., Bieliński D.: Elastomery 2012, 16 (1), 3.
[44] https://www.lekarski.umed.wroc.pl/sites/default/files/mikrobiologia/files/Dezynfekcja_i_sterylizacja.pdf (data dostępu 16.07.2018 r.)
[45] ht t p://w w w. a nt ybiot yk i.e du.pl /e dwa /p d f/EDWA2017_material_prasowy.pdf (data dostępu16.07.2018 r.)
[46] Pat. US 5 906 825 (1999)
[47] Tuson H.H., Weibel D.B.: Soft Matter 2013, 9, 4368. http://dx.doi.org/10.1039/c3sm27705d
[48] Aleaghil S.A., Fattahy E., Baei B.: International Journal of Advanced Biotechnology and Research 2016, 7 (4), 1569, ISSN 2278-599X.
[49] Swartjes J., Sharma P.K., van Kooten T.G. i in.: Current Medicinal Chemistry 2015, 22 (18), 2116. http://dx.doi.org/10.2174/0929867321666140916121355
[50] Hajipour M.J., Fromm K.M., Ashkarran A.A. i in.: Trends in Biotechnology 2012, 30, 499. http://dx.doi.org/10.1016/j.tibtech.2012.06.004
[51] http://www.rynekzdrowia.pl/Serwis-Zakazenia-Szpitalne/Ekspert-80-proc-zakazen-szpitalnychprzenoszonych-jest-przez-dotyk,180146,1015.html (data dostępu 16.07.2018 r.)
[52] Pittol M., Tomacheski D., Simoes D.N. i in.: Materials Research 2017, 20, 1266. http://dx.doi.org/10.1590/1980-5373-MR-2017-0137
[53] Parizzi F.S.Q., De Andrade N.J., De Sa Silva C.A. i in.: Brazilian Archives of Biology and Technology 2004, 47,77. http://dx.doi.org/10.1590/S1516-89132004000100011
[54] Hibbing M.E., Fuqua C., Parsek M.R. i in.: Nature Reviews Microbiology 2010, 5, 15. http://dx.doi.org/10.1038/nrmicro2259
[55] Bower C.K., McGuire J., Daeschel M.A.: Trends in Food Science and Technology 1996, 7, 152. http://dx.doi.org/10.1016/0924-2244(96)81255-6
[56] Whitehead K.A., Verran J.: Current Opinion in Food Science 2015, 2, 84. http://dx.doi.org/10.1016/j.cofs.2015.02.003
[57] Siroli L., Patrignani F., Serrazanetti D.I. i in.: Frontiers in Microbiology 2017, 5, 1. http://dx.doi.org/10.3389/fmicb.2017.02606
[58] Egwari L.O., Taiwo M.A.: West Indian Medical Journal 2004, 53, 164.
[59] Sugarman B.: Urological Research 1979, 10, 37. https://doi.org/10.1007/BF00256522
[60] Pat. US 4 603 152 (1986)
[61] Vizcarra I.A.: “Strategies Underlying Bacterial Survival on Surfaces” PhD thesis, ETH Zurich 2015.
[62] Singha P., Locklin J., Handa H.: Acta Biomaterialia 2017, 50, 20. http://dx.doi.org/10.1016/j.actbio.2016.11.070
[63] Komnatnyy V.V., Chiang W., Tolker-Nielsen T. i in.: Angewandte Chemie International Edition 2014, 53, 439. http://dx.doi.org/10.1002/anie.201307975
[64] Dallas P., Sharma V.K., Zboril R.: Advances in Colloid and Interface Science 2011, 166, 119. http://dx.doi.org/10.1016/j.cis.2011.05.008
[65] Sobczak M., Dębek C., Olędzka E., Kozłowski R.: Molecules 2013, 18, 14 122. http://dx.doi.org/10.3390/molecules181114122
[66] Sobczak M., Olędzka E., Dębek C.: Engineering of Biomaterials/Inżynieria Biomateriałów 2011, 106–108, 30.
[67] Cloutier M., Tolouel R., Lesage O. i in.: Biointerphases 2014, 9 (2), 029013. http://dx.doi.org/10.1116/1.4871435
[68] Serrano C., García-Fernández L., Fernández--Blazquez J.P. i in.: Biomaterials 2015, 52, 291. http://dx.doi.org/10.1016/j.biomaterials.2015.02.039
[69] Bieliński D.M., Ostaszewska U., Jagielski J.: Polimery 2014, 59, 416. http://dx.doi.org/10.14314/polimery.2014.416
[70] Alves M.J., Grenho L., Lopes C. i in.: Materials Science and Engineering: C 2018, 92, 840. http://dx.doi.org/10.1016/j.msec.2018.07.045
[71] Bandzierz K.S., Reuvekamp L.A.E.M., Przybytniak G. i in.: Radiation Physics and Chemistry 2018, 149, 14. http://dx.doi.org/10.1016/j.radphyschem.2017.12.011
[72] Jin G., Qin H., Cao H. i in.: Biomaterials 2014, 35, 7699. http://dx.doi.org/10.1016/j.biomaterials.2014.05.074
[73] Zhao X., Jamesh M.I., Li W.K. i in.: Acta Biomaterialia 2014, 10, 544. http://dx.doi.org/10.1016/j.actbio.2013.10.012
[74] Kondyurin A.: Materials 2018, 11 (5), 657. http://dx.doi.org/10.3390/ma11050657
[75] Vasilev K., Griesser S.S., Griesser H.J.: Plasma Processes and Polymers 2011, 8, 1010. http://dx.doi.org/10.1002/ppap.201100097
[76] Zimmermann R., Pfuch A., Horn K. i in.: Plasma Processes and Polymers 2011, 8, 295. http://dx.doi.org/10.1002/ppap.201000113
[77] Qin W., Meng J., Wang Y.: Surface and Interface Analysis 2017, 49, 1008. http://dx.doi.org/10.1002/sia.6261
[78] Xiong Q., Zhu L., Ji S. i in.: IEEE Transactions on Dielectrics and Electrical Insulation 2018, 25, 272. http://dx.doi.org/10.1109/TDEI.2018.006677
[79] Vazirinasab E., Jafari R., Momen G., Carreira T.: Materials Science Forum 2018, 941, 1808. http://dx.doi.org/10.4028/www.scientific.net/MSF.941.1808
[80] Dahan R.M., Sarip M.N., Ling Y.S. i in.: Advanced Materials Research 2013, 626, 317. http://dx.doi.org/10.4028/www.scientific.net/AMR.626.317
[81] Ercan U.K., Ibiş F., Dikyol C. i in.: PLoS One 2018, 13 (9), e0202703. http://dx.doi.org/10.1371/journal.pone.0202703
[82] Vaz J.M., Michel E.C., Chevallier P. i in.: Journal of Biomaterials and Tissue Engineering 2014, 4, 1. http://dx.doi.org/10.1166/jbt.2014.1262
[83] Gozdek T., Siciński M., Bieliński D.M. i in.: Elastomery 2017, 21 (1), 12.
[84] Yorsaeng S., Pornsunthorntawee O., Rujiravanit R.: Plasma Chemistry and Plasma Processing 2012, 32, 1275. http://dx.doi.org/10.1007/s11090-012-9405-9
[85] Poikelispaa M., Das A., Dierkes W.K. i in.: Proceedings ACS Rubber Division Meeting 2011, 53, 1.
[86] Basuli U., Palaninathan E., Chaki T.K. i in.: Journal of Nanoscience and Nanotechnology 2018, 18, 4621. http://dx.doi.org/10.1166/jnn.2018.15268
[87] Gent A.N.: “The Science and Technology of Rubber” 4th Edition (Eds. Mark J., Erman B., Roland M.), Elsevier Inc., 2013, str. 1–26, ISBN 9780123945846.
[88] Praca zbiorowa: „Guma. Poradnik inżyniera i technika”, Wydawnictwa Naukowo-Techniczne, Warszawa 1981, ISBN 83-204-0201-8.
[89] Rodgers B., Waddell W.: “The Science and Technology of Rubber”, 4th Edition (Eds. Mark J., Erman B., Roland M.), Elsevier Inc., 2013, str. 417–471, ISBN 9780123945846.
[90] De S.K., White J.R.: „Poradnik technologa gumy”, IPG Stomil, Piastów 2003.
[91] Coran A.Y.: “The Science and Technology of Rubber”, 4th Edition (Eds. Mark J., Erman B., Roland M.), Elsevier Inc., 2013, str. 337–381, ISBN 9780123945846.
[92] Dębek C.: „Kompozycje napełniaczy mineralnych do gumowych wyrobów wytłaczanych”, Instytut Inżynierii Materiałów Polimerowych i Barwników, Toruń 2014.
[93] Magryta J., Dębek C., Potocki K. i in.: „Napełniacze węglowe we wzmacnianiu elastomerów”, IPG Stomil, Piastów 2006.
[94] Rathnayake I.U., Ismail H., De Silva C.R. i in.: Iranian Polymer Journal 2015, 24, 1057. http://dx.doi.org/10.1007/s13726-015-0393-5
[95] Zhang Y., Xue X., Zhang Z. i in.: Journal of Applied Polymer Science 2014, 131, 9111. http://dx.doi.org/10.1002/app.40746
[96] Pat. US 6 555 599 (2003)
[97] Pat. US 7 858 674 (2010)
[98] Pat. US 7 060 739 (2006)
[99] Pat. US 6 638 993 (2011)
[100] Bayston R., Milner R.D.G.: Journal of Clinical Pathology 1981, 34, 1057. http://dx.doi.org/10.1136/jcp.34.9.1057
[101] Fu H., Wang Y., Li X. i in.: Composites Science and Technology 2016, 126, 86. http://dx.doi.org/10.1016/j.compscitech.2016.02.018
[102] Suwatthanarak T., Than-Ardna B., Danwanichakul D. i in.: Materials Letters 2016, 168, 31. http://dx.doi.org/10.1016/j.matlet.2016.01.026
[103] Guidelli E.J., Kinoshita A., Ramos A.P. i in.: Journal of Nanoparticle Research 2013, 15 (4), 1536. http://dx.doi.org/10.1007/s11051-013-1536-2
[104] Taptim K., Sombatsompop N.: “Mechanical properties and antimicrobial performance evaluations for silicone rubber compounds”, International Conference on Materials Processing Technology 2011, Phuket, Thailand, June 2–3, 2011, str. 266–272.
[105] Jankauskaitė V., Abzalbekuly B., Lisauskaitė A. i in.: Materials Science 2014, 20, 42. http://dx.doi.org/10.5755/j01.ms.20.1.4397
[106] Ngo T.D., Le T.M.H., Nguyen T.H. i in.: International Journal of Polymer Science 2016, ID 7478161. http://dx.doi.org/10.1155/2016/7478161
[107] Pat. US 5 466 726 (1995)
[108] Kaali P.: “Antimicrobial Polymeric Composites for Medical Applications”, PhD thesis, KTH Chemical Science and Engineering, Stockholm 2011.
[109] Pat. US 7 381 751 (2008)
[110] Gupta A., Srivastava R.: Ultrasonics Sonochemistry 2018, 41, 47. http://dx.doi.org/10.1016/j.ultsonch.2017.09.029
[111] Zare E., Pourseyedi S., Khatami M. i in.: Journal of Molecular Structure 2017, 1146, 96. http://dx.doi.org/10.1016/j.molstruc.2017.05.118
[112] Rathnayake W.G.I.U., Ismail H., Baharin A. i in.: Journal of Applied Polymer Science 2014, 131, 39 601. http://dx.doi.org/10.1002/app.39601
[113] Chen X., Wang Z., Wu J.: Journal of Polymer Research 2018, 25, 48.
[114] Wisutiratanamanee A., Poochinda K., Poompradub S.: Advanced Powder Technology 2017, 28, 1263. http://dx.doi.org/10.1016/j.apt.2017.02.014
[115] Nituica M.V., Sónmez M., Georgescu M. i in.: Leather Footwear Journal 2017, 17, 39. http://dx.doi.org/10.24264/lfj.17.1.5
[116] Seentrakoon B., Junhasavasdikul B., Chavasiri W.: Polymer Degradation and Stability 2013, 98, 566. h t t p://d x . d o i . o r g / 10 .1016/ j .p o l y md e g r a d -stab.2012.11.018
[117] Tomaszewska M., Bieliński D.M., Szuster L.: Elastomery 2012, 16 (2), 3.
[118] Arpornwichanop T., Polpanich D., Thiramanas R. i in.: International Journal of Biological Macromolecules 2015, 81, 151. http://dx.doi.org/10.1016/j.ijbiomac.2015.07.063
[119] Niltui P., Ranking S., Techangamvong S. i in.: Advanced Materials Research 2013, 747, 451. http://dx.doi.org/10.4028/www.scientific.net/AMR.747.451
[120] Melendez-Ortiz H.I., Alvarez-Lorenzo C., Burillo G. i in.: Radiation Physics and Chemistry 2015, 110, 59. http://dx.doi.org/10.1016/j.radphyschem.2015.01.025
[121] Wattanakaroon W., Akanitkul P., Kaowkanya W. i in.: materialstoday: PROCEEDINGS 2017, 4, 6633. http://dx.doi.org/10.1016/j.matpr.2017.06.178
[122] Arpornwichanop T., Polpanich D., Thiramanas R. i in.: Carbohydrate Polymers 2014, 109, 1. http://dx.doi.org/10.1016/j.carbpol.2014.03.030
[123] Liu Y., Wen J., Gao Y. i in.: Applied Surface Science 2018, 436, 624. http://dx.doi.org/10.1016/j.apsusc.2017.12.006
[124] Chang Y.N., Gong J.L., Zeng G.M. i in.: Process Safety and Environmental Protection 2016, 102, 596. http://dx.doi.org/10.1016/j.psep.2016.05.023
[125] Zhang L., Jiang Y., Ding Y. i in.: Journal of Nanoparticle Research 2010, 12, 1625. http://dx.doi.org/10.1007/s11051-009-9711-1
[126] Valerini D., Tammaro L., Di Benedetto F. i in.: Thin Solid Films 2018, 645, 187. http://dx.doi.org/10.1016/j.tsf.2017.10.038
[127] Dimapilis E.A.S., Hsu C.S., Mendoza R.M.O. i in.: Sustainable Environment Research 2018, 28, 47. http://dx.doi.org/10.1016/j.serj.2017.10.001
[128] Yang H., Liu C., Yang D. i in.: Journal of Applied Toxicology 2009, 29, 69. http://dx.doi.org/10.1002/jat.1385
[129] Langauer-Lewowicka H., Pawlas K.: Medycyna Środowiskowa 2015, 18, 7.
[130] Seo Y., Hwang J., Kim J. i in.: International Journal of Nanomedicine 2014, 9, 4621. http://dx.doi.org/10.2147/UN.S69561
[131] Dinh N.X., Quy N.V., Huy T.Q., Le A.T.: Journal of Nanomaterials 2015, 2015, ID 814379. http://dx.doi.org/10.1155/2015/814379
[132] Jana S., Kondakova A.V., Shevchenko S.N. i in.: Colloids Surfaces B: Biointerfaces 2017, 151, 249. http://dx.doi.org/10.1016/j.colsurfb.2016.12.017
[133] Prodana M., Ionita D., Ungureanu C. i in.: Microscopy 2011, 6, 549.
[134] Zhang Y., Tang A., Yang H. i in.: Applied Clay Science 2016, 119, 8. http://dx.doi.org/10.1016/j.clay.2015.06.034
[135] Pat. US 4 902 503 (1990)
[136] Rathnayake W.G.I.U., Ismail H., Baharin A. i in.: Polymer Testing 2012, 31, 586. http://dx.doi.org/10.1016/j.polymertesting.2012.01.010
[137] Pat. US 6 852 782 (2005)
[138] Pat. US 6 943 205 (2005)
[139] Ohtake Y.: Nippon Gomu Kyokaishi 2006, 79 (11), 529. https://doi.org/10.2324/gomu.79.529
[140] Pazhooh H.N., Bagheri R., Adloo A.: Polymer 2017, 108, 135. http://dx.doi.org/10.1016/j.polymer.2016.11.059
[141] Fox C.P.: Journal of Industrial & Engineering Chemistry 1917, 9 (12), 1092. http://dx.doi.org/10.1021/ie50096a010
[142] Murakami K.: Journal of the Japan Society of Colour Material 1972, 45 (1), 2. https://doi.org/10.4011/shikizai1937.45.2
[143] Pazhooh H.N., Bagheri R., Adloo A.: Polymer 2017, 108, 135. https://doi.org/10.1016/j.polymer.2016.11.059
[144] Marzec A., Laskowska A., Boiteux G. i in.: European Polymer Journal 2014, 53, 139. https://doi.org/10.1016/j.eurpolymj.2014.01.035
[145] Marzec A., Laskowska A., Boiteux G. i in.: Macromolecular Symposium 2014, 342 (1), 25. https://doi.org/10.1002/masy.201300231
[146] Strąkowska A., Zaborski M.: Progress in Colloid and Polymer Science 2011, 138, 151. https://doi.org/10.1007/978-3-642-19038-4_27
[147] Pat. US 6 448 306 (2002)
[148] Pat. WO 02/077095 (2002)

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-118d2676-9715-42ac-9249-b3aa1215e30e