Residual fuel atomization process simulation

• Autorzy: Klyus O. , Zamiatina N.

Identyfikatory

DOI

10.19206/CE-2017-219

• Języki publikacji: PL

Abstrakty

EN

The process of atomization of fuel in engines with compression ignition is determining in organization of the combustion process, the result of which are the economic and environmental performance of the engine. One of the main parameters of the spray jet fuel is the mean droplet diameter. The article presents the results of analytical and experimental studies by the definition of mean diameter of Sauter roplet of atomized residual fuel IFO380.

Słowa kluczowe

PL

silnik spalinowy; paliwo pozostałościowe; średnica Sautera

EN

diesel engines; residual fuel; mean diameter of Sauter

• Wydawca: Polskie Towarzystwo Naukowe Silników Spalinowych
• Czasopismo: Combustion Engines
• Rocznik: 2017
• Tom: R. 56, nr 2
• Strony: 108--112
• Opis fizyczny: Bibliogr. 14 poz., il., wykr.

Twórcy

autor

Klyus O.

• Maritime University of Szczecin

autor

Zamiatina N.

• Faculty of Marine Technology and Natural Sciences at Klaipeda University

Bibliografia

• [1] ASHGRIZ, H. Handbook of atomization and sprays. Theory and applications. Springer. 2011.
• [2] CAI, H., SONG, B., PEI, Y., SHI. S. Fuel leaking analysis of fuel tank by projectiles impact with mechanical properties of projectiles. Advanced materials research. 2013, 644, 203-206.
• [3] FILIPPA, L., TRENTO, A., ÁLVAREZ, A.M. Sauter mean diameter determination for the fine fraction of suspended sediments using a LISST-25X diffractometer. Measurement. 2012, 45(3), 364-3687.
• [4] KENNETH, W.R., KENNETH, M.B. Combustion engineering, Second edition. CRC Press Taylor and Francis. 2011.
• [5] LEFEBVRE, A.H. Atomization and sprays. Hemisphere Publishing Corporation. New York. 1989.
• [6] LIU, H. Science and engineering of droplets – fundamentals and applications. William Andrew Publishing, New York, USA. 2000.
• [7] SANTOS, F.D., MOYNE, L.L. Spray atomization models in engine applications, from correlations to direct numericasimulations. Oil & Gas Science and Technology – Rev. IFP Energies nouvelles. 2011, 66(5), 801-822.
• [8] Spraytec user manual. Malvern Instruments Ltd. MAN0368 issue 3.0. 2007.
• [9] TOTTEN, E.G., WESTBROOK, R.S., SHAH, J.R. Fuels and lubricants handbook: technology, properties, performance and testing. ASTM manual series: MNL37WCD, USA. 2003, 1087.
• [10] QING, S., JIXIAN, G., YUHUI, L. et al. Estimation of the sauter mean diameter for biodiesels by the mixture topological index. Renewable energy. 2011, 36(2), 482-487.
• [11] ZABŁOCKI M. Wtrysk i spalanie paliwa w silnikach wysokoprężnych. WKiŁ, Warszawa. 1976.
• [12] ЗАРЕЦКАЯ, А.К. Технология использования топлива, масла и воды. Конспект лекций, Керчь. 2014.
• [13] КУЛЕШОВ, А.С. Программа расчета и оптимизации двигателей внутреннего сгорания ДИЗЕЛЬ-РК. Описание математических моделей, решение оптимизационных задач. МГТУим. Н.Э.Баумана. 2004.
• [14] РАЗЛЕЙЦЕВ, Н.Ф. Моделирование и оптимизация процесса сгорания в дизелях. Вища школа: Изд-во при Харьк. ун-те. 1980.